Massey Ferguson MF 9200 Series 9250 Draper Header Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson MF 9200 Series 9250 Draper Header Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson MF 9200 Series 9250 Draper Header Operator’s Manual – PDF DOWNLOAD

700738430 G Rev.
CONTENTS
Serial Numbers AGCM92500CHD01101 and Up

A word to the operator:

• It is your responsibility to read and understand the safety section in this manual and the manual for all implements before you operate this machine. You are responsible for your safety. Good safety procedures prevent injury to you and the persons around you. Make the information in the safety section of this manual a part of your safety procedure.
• This safety section is written only for this type of machine. Safety is your responsibility. You can prevent injury and death. This safety section gives basic safety examples that can occur during the operation and maintenance of your machine. This safety section is not a replacement for safety instruction in other sections of this manual.
• Injury or death can occur if the safety instruction is not obeyed. Learn how to operate the machine and how to use the controls correctly. Do not operate the machine if you do not know how to operate the machine. Do not let persons operate the machine that do not know how to operate the machine. Follow all safety instructions in the manuals and on the safety signs on the machine, the implements, and the attachments. Use only approved attachments and implements. Make sure that your machine has the correct equipment that is necessary by the local regulations.

This manual
This manual covers general safety instructions for this machine. Keep this manual with the machine. Right and left, as used in this manual, are given as if you are in the operator seat. The photos, illustrations, and data used in this manual were up to date when published, but in-line production changes can make your machine have small differences. The manufacturer reserves the right to redesign and change the machine as necessary without notification.

Prepare for operation

• Read and understand the operating instructions and precautions in this manual before you operate or perform service оn the machine. Make sure that you know and understand the positions and operations of all controls. Make sure that all controls are in neutral and the parking brake is applied before you start the machine.
• Make sure that the steering wheel is in the center position and locked. Make sure that all persons are а sufficient distance from your area of work before you start or operate the machine. Do checks оn the controls and learn all controls in an area clear of persons and objects before you start work with the machine.
• Know the dimensions of the machine and have sufficient space available for operation. Do not operate the machine at high speeds around persons, buildings, other equipment, etc. Always use correct procedures when you do tasks around and operate the machine.
• Do not let children or persons who do not know how to operate the machine operate the machine. kеер other persons away from your area of work. Do not let other persons ride оn the machine. Make sure that the machine is in the good mechanical condition. Make sure that the machine has the correct equipment as necessary bу local regulations. All equipment has а limit. Make sure you understand the speed, brakes, steering, stability, and load characteristics of this equipment before you start.

TABLE OF CONTENTS:

Massey Ferguson MF 9200 Series 9250 Draper Header Operator’s Manual – PDF DOWNLOAD

SAFEТY 1
Safety Alert Symbol 1
Safety Messages 1
Informational Messages 1
Safety Signs 2
А Word То The Operator 3
Operator Manual 4
Prepare For Operation 4
Operation 5
General Information 5
РРЕ (Personal Protection Equipment) 6
Seat Instructions 7
Shield and Guards 7
Exhaust Warning 8
Flying Debris 8
Handrails 8
Travel Оп PuЫic Roads 9
Maintenance 1 О
General lnformation 1 О
Fire Prevention and First Aid 12
Checking for High Pressure Leaks 13
Ti re Safety 13
Accumulator Safety 14
Cylinder Stops 14
Reel Lift Cylinder Stops 14
Header Lift Cylinder Stop 15
Shield Latches 16
Draper Drive Shields 17
Auger Shaft Shield 17
End Shields 17
Divider Shield 18
Reel Drive Shield 18
Safety Sign Location 19
Left-hand, Rear View of the Header 19
Right-hand, Rear View of the Header 20
Center, Rear view of the Header 21
Front of Header 21
Ends of Header 22
Safety Decals 23
lnformational Decals 26
GENERAL INFORMATION 29
lntroduction 29
Replacement Parts 29
Recommended Header/Comblne Usage 29
Machine ldentification 29
OPERATION 31
Checklists 31
Daily 31
Before Each Season 31
End of Season 31
Original lnstructions
700738430 G Rev
CONTENTS
Comblne Setup 32
2009 Model Year and Later Axial Comblnes 32
2003 to 2008 Model Year Axial and
2003 Model Year and Later Transverse Comblnes 32
Required Kits to lnstall the Header оп Comblnes 33
Header Break-in 33
Parking Stands 33
Header lnstallation and Removal 34
lnstallation 34
Removal 36
Reel Position 38
Reel Fore and Aft 38
Reel Height 40
Reel Speed 40
Reel Speed Sensor 41
Tine Pitch Adjustment 41
Header Control Sensors 42
Drag Rod Sensors 42
Cutterbar Sensors 43
Header Pitch 44
2009 and Later Axial Comblne 44
2003 and Later Transverse and 2003 to 2008 Axial Comblnes 45
Cutterbar 46
Recommended Ground Pressure 46
Adjusting Ground Pressure 46
Locking and Unlocking Cutterbar 48
Sickle Storage 48
Header Extremity Lights 49
Flighting Filler 49
Center Crop Deflector 49
Header Transport Kit 50
Transport to Field Position 50
Field to Transport Position 56
Connecting the Header Transport to Hitch 56
Accessories 57
Reel Divider 57
Divider Rod 57
L U BRICATION AN D MAINTENANCE 59
ii
Lubrication and Maintenance 59
Lubrication Details 60
Gear Вох Oil Level 63
Sealed Chain 64
Lubrication and Cleaning 64
Саге of Roller Chains 65
Roller Chain Don’ts 65
Adjustment 66
Drive Belts 66
Proper Саге of Belts 66
Adjustments 66
Draper Maintenance 68
Draper Саге 68
Draper Tension 68
Draper Removal 69
Draper Roller Scraper Clearance 70
Center Deck Flotation Spring 70
Reel Lift Arms 71
Minimum Reel Lift Height 71
Sychronizing Reel Lift Arms 71
Cutterbar 72
Sickle Timing 72
Sickle AssemЫy 73
Standard Sickle and Guards 75
700738430 G Rev
CONTENTS
SC H Sickle and Guards ( Schumacher Manufacturing Со ) 78
Sickle Drive Shear Bolt 80
Sensor Adjustment and Calibration 81
Automatic Header Height Control (АННС) Calibration 81
Header Sensor Calibration 81
Reel Speed Sensors 81
Drag Rod Sensors 82
Cutterbar Sensors 84
Transport Wheel Torque 87
Hydraulics 87
Bleeding Cylinders 87
Hydraulic Schematic 89
Electrical 90
Wiring Diagram 90
TRO U BLE S HOOТIN G 93
Cutterbar 93
Reel 94
Draper 95
SPECIFICATION S 97
Dimensions and Weights 97
Header Depth 97
Header Width 98
Weights 98
Pick-Up Reel 98
Reel Drive 99
Reel Height Control 99
Cutterbar 99
Sickle 99
Drapers 1 00
Side Drapers 100
Center Draper 100
Center Conveyor 1 00
General Lubrication 100
Wheels 100
Header Transport 100
Torque 101
Standard Torque Requirements 101
Metric Bolts Markings and Torque Requirements 102
Metric lnformation 103
A S SEM BL У 105
Header AssemЫy 105
Shipping Stand Removal 105
Reel Lift Cylinders 107
Reel 107
Bracket and Wire Removal 109
Left-hand and Right-hand Draper lnstallation 11 О
Center Draper lnstallation 112
Pre- Delivery Checklist 114
Delivery Checklist 114
INDEX 115

Customer Support: [email protected]

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V