Massey Ferguson MF7340 Tractor Combines Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson MF7340 Tractor Combines Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson MF7340 Tractor Combines Operator’s Manual – PDF DOWNLOAD

MF 7340- S/N => ZN205512_03010001

INTRODUCTION:

• Your new self-propelled combine is manufactured for harvesting seed and cereal crops, for threshing, separating, cleaning and conveying the grain into the tank and depositing the straw on the ground. This Operator’s Manual should be used as a practical reference guide: It contains all the necessary practical information for the operation, adjustment and maintenance of your new machine.
• Your combine was designed and built to ensure optimum performance, comfort and ease-of-operation in a wide variety of crops and conditions. The combine has been thoroughly inspected prior to delivery both at the factory and by your Dealer, to ensure you receive it in perfect condition. To keep the combine in perfect condition and to ensure trouble-free performance, the periodical maintenance operations listed in this manual should be carried out at the recommended intervals.
• Before operating and/or driving the combine, read this Operator’s Manual carefully, paying particular attention to the section on safety rules. Always keep this manual on hand for further reference. The terms “left” and “right” are always used with reference to the machine travelling direction. Should you require further information about the machine, please do not hesitate to contact your authorised Dealer. Your Dealer provides specially trained personnel, genuine quality spare parts and the required tools to solve any problems that may arise.

• The genuine spare parts and accessories have been specifically designed for this type of machine. Only genuine parts supplied by your authorised Dealer can guarantee correct operation and optimum performance. Never use non-genuine spare parts or accessories: Some accessories (e.g. PTO shafts, straw choppers, tables) require an EC certification, which can be provided only by the manufacturer or his qualified and recognised sub-suppliers.
• Non-genuine spare parts have not been tested and are not authorised by the manufacturer. The fitting and/or use of such equipment may have a damaging effect on the design features of the machine and jeopardise operational safety. The manufacturer disclaims all liability in the event of loss or damage arising as a result of non-genuine parts, accessories or equipment being used. It is expressly prohibited to make any modification to the combine without the prior written authorisation by the manufacturer.

MASSEY FERGUSON MF7340 TRACTOR COMBINES OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Massey Ferguson MF7340 Tractor Combines Operator’s Manual – PDF DOWNLOAD

1 General Information 13
1 1 Information 15
1 1 1 Introduction 15
1 1 2 Company policy 15
1 1 3 Optional equipment 15
1 1 4 Spare parts and accessories 1 6
1 1 5 Warranty 1 6
1 1 6 Lubricants 1 6
1 2 Use 18
1 2 1 Use of the combine 1 8
1 3 Identification 19
1 3 1 Combine identification 1 9
1 3 2 Engine Identification 20
1 3 3 Cutting table identification 2 1
1 3 4 Cab identification 2 1
1 3 5 Hydrostatic pump identification 2 2
1 3 6 Hydrostatic motor identification 2 2
1 3 7 Straw chopper identification (if fitted) 2 3
1 3 8 Chaff spreader identification (if fitted) 2 3
1 3 9 Trailer hitch identification (if fitted) 2 4
1 4 Identification form 25
1 4 1 Machine data 25
1 5 Conformity 26
1 5 1 EC Declaration of Conformity 2 6
1 6 Information 28
1 6 1 Ecology 2 8
1 6 2 Hydraulic systems: hoses 2 8
1 6 3 Scrapping and disposal 2 9
1 7 Weight 30
1 7 1 Weight distribution 30
2 Safety 33
2 1 Warning symbols and safety instructions 35
2 1 1 Warnings 35
2 2 Information for road transport 36
2 2 1 Road transport 3 6
2 3 Information for operations 39
2 3 1 Field Operations 3 9
2 4 Information for maintenance 43
2 4 1 Maintenance work 4 3
2 5 Information on the engine 47
2 5 1 Engine 4 7
2 6 Safety and function decals 50
2 6 1 Location of decals 5 0
2 6 2 Description of decals 5 4
2 7 Work on the battery 6 4
2 7 1 Battery 6 4
2 8 Safety devices 65
2 8 1 Emergency exit 65
Combines
MF 7340_EN_LA327436013
Table of contents
2 8 2 Operator presence device 66
2 8 3 Safety belts 67
2 8 4 Table safety stops 68
2 8 5 Safety guard for main crop elevator 69
2 8 6 Safety Stop 69
2 8 7 Sprags for wheels 70
2 8 8 Audible alarm for reversing 71
2 8 9 Reflectors for road transport 72
2 8 10 Safety Guards 73
2 8 11 Fall protection rails 73
2 8 12 Safety devices for operations to be carried out in the upper part of the machine 74
2 8 13 Straw chopper 75
2 8 14 Fire extinguisher 75
2 9 Trailer hitch 76
2 9 1 Automatic towing hooks 76
2 9 2 CUNA and CE trailer hitches 77
2 9 2 1 Procedure for attaching and removing 78
2 9 2 2 Drawbar coupling 79
2 9 3 Fixed trailer hitch (non-automatic – CUNA type) 79
2 10 Machine lifting 80
2 10 1 Attachment points 8 0
2 11 Towing 81
2 11 1 Towing the combine 8 1
2 1 2 Further information 82
2 12 1 Noise level in the cab 8 2
2 12 2 Vibrations in the cab 8 2
2 12 3 Statutory regulations 8 2
2 12 4 Electromagnetic emissions 8 3
2 1 3 Notes 84
2 13 1 Notes for road transport 8 4
3 Operation 87
3 1 Combine operation 89
3 1 1 Crop processing 8 9
3 2 Stage 1 90
3 2 1 Feeding 9 0
3 3 Stage 2 91
3 3 1 Threshing 9 1
3 4 Stage 3 92
3 4 1 Separation 9 2
3 5 Stage 4 93
3 5 1 Cleaning 9 3
3 6 Stage 5 94
3 6 1 Grain storage and unloading 9 4
4 Controls and Instruments 95
4 1 Steering column 97
4 1 1 Components and adjustments 9 7
4 2 Multifunction lever 98
4 2 1 Main components 9 8
4 3 Instrument panel 99
4 3 1 Front control panel 9 9
4 3 2 Rear control panel 101
4 3 3 Multiple light indicators 105
4 3 4 On-board Computer 10 6
Combines
MF 7340_EN_LA327436013
Table of contents
4 3 4 1 Graphical user interface 108
4 3 4 2 Day/night mode 1 10
4 3 4 3 Operational parameters 1 1 1
4 3 4 4 Auto-calibration 1 1 1
4 3 4 5 Hectare counter 1 12
4 3 4 6 No communication 1 1 2
4 3 4 7 Alarm statuses 1 1 3
4 3 5 Performance monitor (on request) 1 1 3
4 3 5 1 Using the monitor 1 1 4
4 3 5 2 Selecting the measurement range (straw walker, sieves or total) 1 1 4
4 3 5 3 Calibrating the bar cursor scale 1 1 5
4 3 5 4 Sensitivity adjustment 1 1 5
4 3 5 5 Shifting to forward speed monitoring 1 16
4 3 5 6 Summary of keyboard functions 1 16
Description 1 1 7
Cab 1 1 a
Cab controls (top right-hand side) 1 18
Operator seat 12 1
Preparation for radio installation 1 2 2
Rear Cab Window 1 2 2
Reading light 123
Document Pocket 123
Air conditioning in the cab 1 2 4
4 5 7 1 Pressurization 1 2 5
4 5 8 Heating 126
Access to combine components 1 27
4 6 1 Access to the operator platform 127
4 6 2 Accessing and cleaning the front windscreen of the cab 128
4 6 3 Access to the engine compartment 129
4 6 4 Access to the grain tank 1 3 0
4 6 5 Access to the inside of the grain tank 1 3 1
Engine 1 32
4 7 1 Starting the engine 1 3 2
4 7 2 Useful advice 1 3 3
4 7 3 Stopping the engine 1 3 4
Road transport 1 35
4 8 1 Operations to be carried out before transportation 1 3 5
4 8 2 Position light and sidelight adjustment 1 3 6
Using the combine 1 37
4 9 1 Operations to be carried out before use 1 3 7
5 Field Operations 1 39
5 1 General Information 1 4 1
5 1 1 Notes 1 4 1
5 1 2 Before operating the machine in the field 1 4 1
5 2 Starting and Stopping the Combine 1 43
5 2 1 Procedure to follow 1 4 3
5 3 Cutting table 1 45
5 3 1 Attaching the cutting table 1 4 5
5 3 1 1 Adjustments for attaching the cutting table 1 4 7
5 3 2 Removing the table 1 4 8
5 3 3 Adjustment of cutting table ground clearance 1 4 9
5 4 Main Crop Elevator 1 50
Combines
5 4 1 Adjustments 1 50
5 4 1 1 Access to the main components 1 5 2
5 4 2 Reverse drive system 1 5 3
MF 7340_EN_LA327436013
Table of contents
5 5 Cylinder Housing 1 54
5 5 1 Components 1 5 4
5 5 2 Threshing drum 1 5 5
5 5 3 Wheat concave 1 56
5 5 3 1 Concave filler plates 1 57
5 5 3 2 Parallelism between the cylinder and concave 1 58
5 5 3 3 Unblocking the threshing drum 1 59
5 5 4 Sectional concave 16 0
5 5 4 1 Concave filler plates 16 1
5 5 4 2 Parallelism between the cylinder and concave 16 2
5 5 5 Universal wheat/maize concave 16 3
5 5 5 1 Basic concave settings 16 4
5 5 6 Spike-toothed Cylinder/Concave (for rice) 16 4
5 5 7 Rear beater 16 6
5 6 Straw walkers 1 67
5 6 1 Description and adjustments 16 7
5 7 Main Grain Pan 1 68
5 7 1 Description 16 8
5 7 2 Checking the main grain pan 16 9
5 7 3 Cleaning the main grain pan 170
5 7 4 Stone trap assembly removal/refitting 17 1
5 8 Fanning Mill 1 73
5 8 1 Description and adjustments 17 3
5 8 1 1 Fanning mill for threshing light seed crops 17 5
5 9 Top sieve 1 76
5 9 1 Adjustment 176
5 10 Bottom sieve 1 80
5 10 1 Adjustment 180
5 11 Tailings 1 82
5 1 1 1 Description and adjustments 18 2
5 1 2 Grain tank 1 84
5 1 2 1 Description 18 4
5 12 1 1 Grain tank unloading auger 18 5
5 12 1 2 Sensor to measure tank filling 186
5 12 1 3 Grain tank control window 186
5 12 1 4 Doors for Grain Tank Maintenance and Cleaning 187
5 12 1 5 Vertical auger tank drain door 188
5 12 1 6 Tank bottom door 189
5 12 1 7 Grain Tank Cover 19 0
5 12 1 8 Basic Settings 19 1
6 Lubrication and Maintenance 1 93
6 1 General Information 1 95
6 1 1 Lubrication and Maintenance 19 5
6 2 Preliminary Service Inspection 1 96
6 2 1 After the first 50 working hours 19 6
6 3 Scheduled Service Inspection 1 97
6 3 1 When and where to carry it out 19 7
6 3 2 Interval – 10 hours 19 9
6 3 2 1 Cylinder variator ( 1) 19 9
6 3 2 2 Engine oil (2) 200
6 3 2 3 Coolant expansion tank (3) 20 1
6 3 2 4 Hydraulic and hydrostatic systems tank (4) 20 1
6 3 2 5 Prefilter/water separator (5) 202
6 3 2 6 Straw chopper rotor (if fitted) (6) 202
6 3 3 Interval – 7 5 hours 20 3
Combines
MF 7340_EN_LA327436013
6 4
Combines
Table of contents
6 3 3 1 Service brakes ( 1 1) 20 3
6 3 3 2 Main crop elevator lower shaft ( 1 2) 20 3
6 3 3 3 Main crop elevator belt tensioner ( 1 3) 20 4
6 3 3 4 Fanning mill variator ( 1 4) 20 4
6 3 3 5 Crop-unloading auger drive belt tensioner ( 1 5) 20 5
6 3 3 6 Coupling bushes of final drive shafts ( 16) 20 5
6 3 3 7 Rear axle support ( 17) 206
6 3 3 8 Rear axle king pins ( 18) 206
6 3 3 9 Rear straw-walker shaft supports ( 19) 207
6 3 3 10 Unloading auger bottom gearbox (20) 207
6 3 3 1 1 Unloading auger top gearbox (2 1) 208
6 3 3 1 2 Table drive-belt tensioner (2 2) 208
6 3 3 1 3 Track frames (2 3) 209
6 3 3 1 4 Cab air filters (2 4) 209
6 3 3 1 5 Evaporator (2 5) 2 1 1
6 3 3 16 Condenser (26) 2 1 1
6 3 3 17 Radiators and hydraulic oil (27) 2 1 2
6 3 3 18 Adjusting the rotary screen brushes and aspirator brushes 2 1 3
6 3 3 19 Chaff spreader drive (if fitted) (28) 2 1 4
6 3 4 Interval – 1 50 hours 2 1 5
6 3 4 1 Park brake (4 1) 2 1 5
6 3 4 2 Gearbox (4 2) 2 1 5
6 3 4 3 Final drives (4 3) 2 16
6 3 4 4 Unloading auger bottom gearbox (4 4) 2 16
6 3 4 5 Main crop elevator supports (4 5) 2 17
6 3 4 6 Reversing-belt tensioner-arm pin (4 6) 2 17
6 3 4 7 Main clutch (4 7) 2 18
6 3 4 8 Tailings-auger left support (4 8) 2 18
6 3 4 9 Windscreen wash fluid reservoir (49) 2 19
6 3 4 10 Threshing-mechanism belt tensioner (50) 2 19
6 3 4 1 1 Hydrostatic pump belt tensioner (5 1) 2 20
6 3 4 1 2 Unloading auger slewing ring (5 2) 2 20
6 3 4 1 3 Engine air filter (5 3) 2 2 1
6 3 4 1 4 Straw-chopper driven belt tensioner (5 4) 2 2 2
6 3 4 1 5 Straw chopper drive-belt tensioner (5 5) 2 2 2
6 3 4 16 Engine (56) 2 2 2
6 3 4 17 Straw chopper layshaft (57) 2 2 4
6 3 4 18 Return rotary-screen belt tensioner (58) 2 2 4
6 3 4 19 Rotary-screen belt tensioner (59) 2 2 5
6 3 4 20 Radiator-fan drive belt tensioner (6 0) 2 2 5
6 3 5 Interval – 2 2 5 hours 2 2 5
6 3 5 1 Engine oil and filters (7 1) 2 2 5
6 3 6 Interval – 4 50 hours 2 28
6 3 6 1 Battery (8 1) 2 28
6 3 6 2 Dehydrator filter (8 2) 2 29
6 3 6 3 Final drives (8 3) 2 3 0
6 3 6 4 Gearbox (8 4) 2 3 0
6 3 6 5 Hydraulic oil intake filter (8 5) 2 3 1
6 3 6 6 Hydrostatic transmission filter (86) 2 3 2
6 3 6 7 Hydraulic systems oil (87) 2 3 3
6 3 6 8 Hydraulic and hydrostatic system return filter (88) 2 3 5
6 3 6 9 Engine diesel-fuel filters (89) 2 3 5
6 3 6 10 Catalytic fluid filter (9 0) 2 3 7
Periodical maintenance operations 238
6 4 1 Description 2 3 8
6 4 1 1 Engine valves ( 1) 2 3 9
6 4 1 2 Coolant (2) 2 4 0
6 4 1 3 Service brake circuit fluid (3) 2 4 1
MF 7340_EN_LA327436013
Table of contents
6 4 1 4 Diesel fuel tank (4) 2 4 1
6 4 1 5 Turbocharger (5) 2 4 2
6 4 1 6 Hydraulic hoses (6) 2 4 2
6 4 1 7 Catalytic fluid tank (DEF) (7) 2 4 3
6 5 Lubrication 244
6 5 1 Summary table 2 4 4
7 Adjustments 245
7 1 Adjustments 247
7 1 1 Important information 2 4 7
7 2 Belt and chain adjustment 248
7 2 1 Belts and chains (left-hand side) 2 4 8
7 2 1 1 Feeder drive belt ( 1) 2 4 8
7 2 1 2 Threshing unit drive belt (2) 2 4 9
7 2 1 3 Unloading auger drive belt (3) 2 4 9
7 2 1 4 Hydrostatic pump drive belt (4) 2 50
7 2 1 5 Chaff spreader drive belt (if fitted) (5) 2 5 1
7 2 1 6 Reversing drive belt (6) 2 5 1
7 2 1 7 Main transmission belt (7) 2 5 2
7 2 1 8 Clean grain and tailings augers drive belt (8) 2 5 2
7 2 1 9 Straw walker drive belt (9) 2 5 3
7 2 1 10 Cutting table drive belt ( 10) 2 5 3
7 2 1 1 1 Unloading auger chain ( 1 1) 2 5 4
7 2 1 1 2 Straw chopper drive belt (if fitted) ( 1 2) 2 5 4
7 2 1 1 3 Straw chopper drive belt (if fitted) ( 1 3) 2 5 5
7 2 2 Belts and chains (right-hand side) 2 56
7 2 2 1 Belt drive for rotary screen (2 1) 2 56
7 2 2 2 Counter drive for rotary screen (2 2) 2 57
7 2 2 3 Drive belt for alternator and engine coolant pump (2 3) 2 57
7 2 2 4 Radiator fan drive belt (2 4) 2 58
7 2 2 5 Belt drive for cylinder variator (2 5) 2 58
7 2 2 6 Belt drive for fanning mill variator (26) 2 59
7 2 2 7 Top chain drive for tailings auger (27) 26 0
7 2 2 8 Tailings elevator chain (28) 26 0
7 2 2 9 Tank filling auger drive chain (29) 26 1
7 2 2 10 Crop elevator chain (3 0) 26 1
7 2 2 1 1 Front crop-elevator chain (3 1) 26 2
7 2 2 12 Cab air-conditioning compressor drive belt (3 2) 26 2
7 2 2 1 3 Dust aspirator drive belt (3 3) 26 3
7 3 Slip clutches 264
7 3 1 Description 26 4
7 3 1 1 Clutch for main crop elevator upper shaft ( 1) 26 4
7 3 1 2 Clutch for shaker shoe counter drive (2) 26 4
7 3 1 3 Shear bolt for unloading auger counter drive (3) 26 5
7 4 Tires 266
7 4 1 T ire pressure 26 6
7 4 2 Replacement of Front Wheels 26 7
7 4 3 Replacement of Rear Wheels 26 8
7 4 4 Front wheel assembly 26 9
7 4 5 Rear wheel assembly 270
7 5 Brakes 271
7 5 1 SeNice brakes 27 1
7 5 2 Park brake 27 2
7 6 Rear axle 273
7 6 1 Toe-in setting 27 3
7 6 2 Steering ram ball joints 27 3
7 6 3 Rear axle support 27 4
Combines
MF 7340_EN_LA327436013
7 7
Table of contents
Battery 275
7 7 1 Battery Replacement 2 7 5
7 7 2 Suggestions regarding the battery 2 7 5
7 7 3 Indicator Light for Battery Charging 2 7 6
8 Systems 277
8 1 Safety Precautions 279
8 1 1 Notes 2 7 9
8 2 Engine supply system 280
8 2 1 Permitted fuels 2 8 0
8 2 2 Fuel Circuit 2 8 1
8 2 3 Bleeding the Fuel Supply Circuit 2 8 2
8 2 4 Catalytic fluid tank ( D EF) 2 8 3
8 2 5 Injection system operation 2 8 5
8 3 Engine air intake and exhaust system 286
8 3 1 Operation 2 8 6
8 4 Engine cooling system 288
8 4 1 Coolant 2 8 8
8 4 2 Engine cooling system operation 2 8 9
8 5 Engine lubrication system 290
8 5 1 Operation 2 9 0
8 5 2 Oil vapor recovery system 29 1
8 6 SCR system 292
8 6 1 Operation 29 2
8 7 Hydraulics system 294
8 7 1 Pumps and fuel tank 29 4
8 7 2 Table positioning hydraulic circuits 29 5
8 7 2 1 Cutting table oleopneumatic shock absorber 29 6
8 7 2 2 Hose burst valve 29 6
8 7 2 3 Cutting table positioning pressure switch 29 7
8 7 3 Hydraulic steering system 2 9 8
8 7 4 Auxiliary hydraulics circuit 2 9 9
8 8 Hydrostatic transmission system 300
8 8 1 Front-wheel drive 30 0
8 9 Electrical system 301
8 9 1 Main components 3 0 1
8 9 2 Fuses 30 2
8 9 3 Additional fuses 30 5
8 9 4 Cab fuses 30 7
8 9 5 Relays 30 8
8 9 5 1 Additional relays 3 1 0
8 9 5 2 Various relays 3 1 1
Control units 3 1 2
8 9 6 1 Engine sensors and control unit 3 1 3
Connections for additional equipment 3 1 4
8 9 7 1 Electric connectors 3 1 4
Headlight adjustment 3 1 6
Unloading area light 3 1 7
Reversing area light 3 1 7
Light in grain tank 3 1 8
Engine access-ladder light 3 1 8
9 Troubleshooting 3 19
9 1 Description 3 2 1
Combines
9 1 1 Feeding 3 2 1
9 1 2 T hreshing 3 2 1
MF 7340_EN_LA327436013
Table of content
Separation and cleaning 3 2 3
Hydrostatic Transmission 3 26
Engine 3 27
Hydraulics system 3 29
Electrical system 3 3 0
Air conditioning circuit 3 3 1
Straw chopper 3 3 1
10 Off-Season Storage 335
1 0 1 Procedure to follow 337
10 1 1 Operations to be carried out after the harvest 3 3 7
10 1 2 Ordering spare parts 3 3 8
10 1 3 Operations to be carried out before the new season 3 3 8
11 Optional equipment 341
11 1 Information 343
1 1 1 1 General considerations 3 4 3
11 2 Optional equipment 344
1 1 2 1 Auxiliary table lifting ram 3 4 4
1 1 2 2 Camera 3 4 5
1 1 2 3 Additional rear view mirrors 3 4 5
1 1 2 4 Additional lights (for work) 3 4 6
1 1 2 5 Performance monitor 3 4 6
1 1 2 6 Windbreak 3 4 7
1 1 2 7 Additional fire extinguisher 3 4 7
1 1 2 8 Diesel fuel prefilter 3 4 8
1 1 2 9 Additional Portable Lamp 3 4 8
1 1 2 10 Weight and moisture control monitor 3 4 9
1 1 2 1 1 Trailer hitch 3 4 9
1 1 2 1 2 Refrigerator 3 50
1 1 2 1 3 Cylinder cover 3 50
1 1 2 1 4 Tailings cover plate 3 5 1
1 1 2 1 5 Top sieve 3 5 1
1 1 2 16 Bottom sieve 3 5 2
1 1 2 17 Electrically-operated sieves and returns sensors 3 5 3
1 1 2 18 Cutting height control 3 5 4
1 1 2 19 Hydraulic quick couplers 3 5 4
11 3 Equipment for threshing 355
1 1 3 1 Equipment for maize 3 5 5
1 1 3 2 Equipment for corn-cob 3 56
1 1 3 3 Equipment for rice 3 57
1 1 3 4 Equipment for light seed crops 3 57
1 1 3 5 Equipment for soya and peas 3 58
11 4 Ballast weights 359
1 1 4 1 Description 3 59
1 1 4 2 Ballast weights on rear axle 3 59
1 1 4 3 Ballast weights on the straw walker hood for machines without straw chopper 3 6 0
1 1 4 4 Ballast weights on the rear wheels with a liquid mix (for tubeless tires) 3 6 1
1 1 4 5 Filling tires with anti-freeze solutions 3 6 2
11 5 Straw chopper 363
1 1 5 1 Transport position 3 6 3
1 1 5 2 Working position 3 6 4
1 1 5 3 Operating the straw chopper 3 6 5
1 1 5 4 Disengaging the straw chopper 3 6 7
1 1 5 5 Access to the straw chopper rotor 3 6 7
1 1 5 6 Straw chopper rotor knives 3 6 7
1 1 5 7 Counter-knives 3 6 8
Combines
MF 7340_EN_LA327436013
11 6
11 7
Table of contents
1 1 5 8 Chopping quality 3 6 8
1 1 5 9 Use of straw chopper in maize 3 70
Chaff Spreader 372
1 1 6 1 Working and maintenance positions 3 7 2
1 1 6 2 Chaff spreader speed 3 7 4
1 1 6 3 Disengaging the chaff spreader 3 7 4
1 1 6 4 Chaff spreader belt tensioning 3 7 4
Tracks 375
1 1 7 1 Use and maintenance 3 7 5
1 1 7 2 Track chain tension 3 76
12 Technical Specifications 377
1 2 1 Wheels and tires 379
1 2 1 1 information 3 79
1 2 1 2 Wheel tightening torque 3 79
1 2 1 3 T ire capacity 3 79
1 2 1 4 T ire equipment- front axle 3 80
1 2 1 5 T ire equipment – rear axle 3 8 1
1 2 1 6 T ire equipment – Version with half-tracks on front axle 3 8 2
1 2 2 Dimensions 383
1 2 2 1 Combine dimensions 3 8 3
1 2 2 2 Tracks with runners 3 8 5
1 2 2 3 Clearance between unloading auger and table 3 86
1 2 2 4 Available cutting tables and weights 3 86
1 2 2 5 Clearance between unloading auger and ground 3 87
1 2 3 Technical specifications 388
1 2 3 1 Feeding unit 3 88
1 2 3 2 Threshing sys 3 88
1 2 3 3 Cleaning unit 3 9 0
1 2 3 4 Grain tank 3 9 1
1 2 3 5 Hydraulic system 3 9 2
1 2 3 6 Hydrostatic system 3 9 2
1 2 3 7 Engine 3 9 2
1 2 3 8 Electrical components 3 9 3
1 2 3 9 Transmission 3 9 3
1 2 3 1 0 Rear axle 3 9 4
1 2 3 1 1 Weight 3 9 4
1 3 Index 395

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V