Massey Ferguson SA MF4200 Series Tractor Operator’s Manual – PDF DOWNLOAD

Description

Massey Ferguson SA MF4200 Series Tractor Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Massey Ferguson SA MF4200 Series Tractor Operator’s Manual – PDF DOWNLOAD

Owner:
1. We аге certain that уои have made ап excellent choice when purchasing this product.
2. This manual is the safest source of information necessary to епаЬ/е а person to operate and maintain this machine; this wi/1 provide optimal performance in operation and а long service life.
З. Кеер this manual in good order so that it is always availaЬ/e when needed.
4. This manual contains operating instructions for the machine specified оп the cover. information related to the installation, assemЬ!y, the electronic system (such as operating software) and optional items тау ассотрапу the product in other manuals.
5. Please read the safety section of this manual very carefully. Read the entire manual before operating the machine for the first time. If уои have апу questions about the instructions contained herein, please contact уоиг dealer for details. Clarify апу questions at the time of technical delivery.
6. The warranty wi/1 Ье valid оп/у when the certificate of delivery is duly registered at AGCO Brazil’s Service and Warranty Oepartment.

INTRODUCTION:

The purpose of this manual is to enable the owner and operator to operate the tractor safely and appropriately. If the instructions are followed correctly, the tractor will work for many years, following the MASSEY FERGUSON tradition. Configuring and adjusting the tractor in the dealership will ensure that these operating and service instructions are properly understood. Always consult the dealer if any part of the manual is not understood. It is extremely important that these instructions are understood and followed. Daily maintenance should become a routine. Always keep a record of the service hours.

• When ordering new parts, use only original MASSEY FERGUSON parts. The MASSEY FERGUSON dealer network provides original parts and can give instructions for installation and use. Using low quality parts can seriously damage the equipment. We recommend that customers buy service parts from MASSEY FERGUSON authorised dealers only. Due to variations in operating conditions, it is impossible for the manufacturer to make comprehensive or definitive statements in its publications with respect to the performance or usage methods of its machines, or to be responsible for any damages or losses arising from such statements, errors or omissions.
• To prevent the warranty being invalidated, consult your MASSEY FERGUSON dealer for special instructions, if the tractor will be used in special conditions, which may be harmful (use in deep waters or in flooded fields, for example). These tractors were designed for agricultural applications only (appropriate use). Any other use shall be considered inappropriate.
• MASSEY FERGUSON is not liable for damage to property or personal injuries caused by improper use. The user must take full responsibility for the consequences of misuse. Conformity and full adherence to the operation, service and maintenance requirements specified by MASSEY FERGUSON are essential factors for appropriate use. These tractors must be operated and maintained only by qualified personnel familiar with the features of the tractor, in addition to the safety rules and standards (accident prevention). It is recommended that customers contact one of the MASSEY FERGUSON dealerships in the event of post-sale problems and for any adjustment that may be required.

TABLE OF CONTENTS:

Massey Ferguson SA MF4200 Series Tractor Operator’s Manual – PDF DOWNLOAD

1 Safety 11
1 1 lntroduction 13
1 2 General Recommendations 14
1 2 1 The tгасtог 1 4
1 2 2 Safety notes 1 4
1 2 3 Note to the орегаtог 1 5
1 2 4 Roll-Over Protective Structure (ROPS) 1 5
1 2 5 Safe maintenance 1 6
1 2 6 Fuel 1 6
1 3 Follow а safety programme 18
1 3 1 Fог ргорег operation 1 8
1 4 Prepare yourself for safe operation 19
1 4 1 Know your equipment 1 9
1 4 2 Protect yourself 1 9
1 4 3 Use the safety devices and protection availaЫe 1 9
1 4 4 Check the equipment 20
1 4 5 Cleaning the tractor 21
1 4 6 Protect the environment 21
1 5 Start-up 22
1 5 1 Ргiог to start-up 22
1 5 2 How to mount and dismount the machine safely 22
1 5 3 Safe start-up 23
1 5 4 Test the controls 23
1 5 5 Starting fluid 24
1 6 Safe operation 25
1 6 1 Manoeuvre correctly 25
1 6 2 Safety practices 25
1 6 3 Rollover risk 26
1 6 4 То prevent геаг rollover 27
1 6 5 То prevent side rollovers 27
1 6 6 Emergency Ьгаkе 28
1 6 7 General operating hazards 28
1 6 8 lmplements and additional equipment 29
1 6 9 Towing with the tractor 29
1 7 Road Transport 31
1 7 1 Rules of the Road 31
1 8 Quality policy 32
1 8 1 Main guidelines 32
1 8 2 ISO 1 4 000 32
1 8 3 Environmental Management System 32
1 8 4 Environmental issues 32
1 8 5 Recommendations for tractor users and customers 33
1 8 6 CONAMA Resolution 34
1 8 7 Mandatory battery recycling 34
1 8 8 Battery safety 34
2 lntroduction 37
2 1 ldentification of your tractor 39
2 2 Description of decals 41
2 3 lmportant Data 51
MF4200
6269701М5
ТаЬ/е of contents
3 lnstruments and Controls 53
3 1 General ldentification 55
3 1 1 ldentification – СаЬ 5 5
3 1 2 ldentification – Platform 5 6
3 1 3 ldentification – Compact 5 7
3 2 Description of Commands and Controls 58
3 2 1 Steering wheel 5 8
3 2 2 Clutch pedal 5 8
3 2 3 Neutral start switch 5 8
3 2 4 Brake pedals 5 9
3 2 5 Throttle pedal 5 9
3 2 6 Differential lock pedal 5 9
3 2 7 Speed selector lever 6 0
3 2 8 Reverse control lever 6 0
3 2 9 Gearshift lever 6 0
3 2 1 О Creeper selector lever (lf equipped) 6 3
3 2 1 1 Parking brake lever 6 4
3 2 1 2 Hand throttle 6 4
3 2 1 3 Front-wheel drive engagement 6 5
3 2 1 4 РТО and I РТО engagement lever 6 6
3 2 1 5 Economy Power Take-Off (ЕРТО) 6 7
3 2 1 6 Depth control (traction) and Hydraulic system position lever 6 7
3 2 1 7 Hydraulic system reaction control 6 8
3 2 1 8 Remote control lever(s) (if equipped) 6 8
3 2 19 Combined flow selector lever 69
3 2 2 0 Seat 70
3 2 2 0 1 Seat adjustment – СаЬ 70
3 2 2 0 2 Seat adjustment – Platform 7 1
3 2 2 0 3 Seat adjustment – Compact 7 1
3 2 2 1 Safety belt adjustments 7 2
3 2 2 2 Slow moving vehicle alert 7 2
3 2 2 3 Trailer light socket 7 2
3 3 lnstrument panel and keys 74
3 3 1 lnstrument panel overview 7 4
3 3 2 lndicators 7 5
3 3 3 Tachograph 7 5
3 3 3 1 Display alert messages 7 5
3 3 3 2 Display messages 7 6
3 3 3 3 Power take-off rpm adjustment 7 6
3 3 4 Warning lights 7 6
3 3 5 Electrical controls 7 8
3 4 ldentification of headlights and tail lights 80
3 4 1 СаЬ tractors 80
3 4 2 Platform tractors 8 1
3 4 3 Compact tractors 8 2
3 5 Cabs and air conditioner 83
3 5 1 General identification 83
3 5 2 СаЬ controls 86
3 5 3 Air conditioner and heater operation 8 8
3 5 3 1 Sequence for activation of the system 89
4 Operation 91
4 1 Ballasting 93
4 1 1 What is ballasting? 93
4 1 2 Ballasting with metal weights (counterbalance weights) 94
4 1 3 Ballasting with water 94
MF4200
6269701М5
4 2
ТаЬ/е of contents
4 1 4 Draining water from the tуге 9 5
Track adjustment 96
4 2 1 The track concept and its importance 9 6
4 2 2 4х 2 front axle 9 6
4 2 2 1 4х 2 front axle tracks 9 7
4 2 3 Front axle ( 4х 4) 9 8
4 2 3 1 lnstructions for changing the track 9 8
4 2 3 2 Steering angle 99
4 2 3 3 4х 4 front axle tracks with reversiЫe stamped disc wheels 100
4 2 3 4 Compact Т ractors equipped with 7 ОО Х1 8 R 1 and 8 ОО Х1 8 R 1 wheels
with disc welded to the rim 1 0 0
4 2 4 Rear axle track 100
4 2 4 1 Rear reversiЫe disc and rim type wheel 10 1
4 2 4 2 Rice wheels 10 2
4 2 4 3 Wheel with die-cast disc 10 2
4 2 4 4 Rear wheels with PAVT system 10 3
4 3 Recommended tyres for your tractor 1 06
4 3 1 Compatibility of front х геаг tyres 10 6
4 3 1 1 Recommended combinations for rear х front wheels 10 6
4 3 1 2 Recommended combinations for геаг х front wheels – Compact 1 1О
4 3 2 Operation with Dual Wheels 1 1 1
4 4 Power Take-Off 1 1 2
4 4 1 Changing the clutch stage 1 1 2
4 4 1 1 After using the РТО 1 1 3
4 4 2 lndependent Power Take-Off Operation 1 1 3
4 4 3 General Guidelines of use for the (l) PTO 1 1 3
4 4 4 Changing the output shaft 1 1 5
4 4 5 Changing the dashboard programming 1 1 6
4 5 Draw Bar 1 1 7
4 5 1 Changing the height of the draw bars 1 1 7
4 5 2 Changing the length of the draw bars 1 1 8
4 5 3 When operating with the draw Ьаг 1 19
4 6 Roll-Over Protective Structure (ROPS) 1 21
4 6 1 Procedure for folding the ROPS (lf installed) 1 2 2
4 7 Prior to start-up 1 23
4 8 Before starting the job 1 24
4 8 1 А TS electrical system 1 2 4
4 9 Stopping the tractor 1 25
4 9 1 Emergency stop 1 2 5
4 1 О Start-up and movement of the tractor 1 26
4 10 1 lnfluence of the tractor protection system 1 2 6
4 10 2 lnfluence of the protection system оп tractor servicing 1 2 7
4 10 3 Alternative start-up features 1 2 7
4 11 Break-in instructions – New engine 1 29
4 12 Operations below 0°С 1 30
4 13 Engagement and use of front-wheel drive 1 31
4 14 Gear Selection 1 32
4 14 1 Engine Speed and the РТО 1 3 2
4 14 2 Using the tаЫе of speeds 1 3 2
4 15 Hydraulic lift system 1 35
MF4200
6269701М5
4 1 5 1 ldentification of components 1 3 5
4 1 5 2 Adjustments before operation 1 3 5
4 1 5 2 1 Adjusting the side stabilizers 1 3 8
4 1 5 3 Lift system categories 1 3 9
4 1 5 4 External auxiliary hydraulic cylinders 1 4 0
ТаЬ/е of contents
4 1 5 5 Procedures for coupling and uncoupling implements 1 4 0
4 1 5 5 1 Uncoupling lmplement 1 4 1
4 1 5 6 Hydraulic lift system 1 4 2
4 1 5 6 1 Т raction Control (depth) outer lever – yellow selector 1 4 4
4 1 5 6 2 Position control – inner lever – red selector 1 4 4
4 1 5 6 3 Position control 1 4 5
4 16 Use of the remote control 1 46
4 1 6 1 Presentation 1 4 6
4 1 6 1 1 Combined flow 1 4 6
4 1 6 1 2 Valve types 1 4 7
4 1 6 2 Operating the system 1 4 7
4 1 6 2 1 Connecting and disconnecting hoses 1 4 8
4 1 6 2 2 Operating in Single ог DouЫe action mode 1 4 9
4 1 6 2 3 Hydraulic motor drive 1 5 0
4 1 6 3 Operation of remote control with variaЫe flow 1 5 0
4 1 6 4 Combined flow 1 5 0
4 1 6 5 lmplements that use large quantities of oil 1 5 1
4 1 6 6 General recommendations 1 5 2
4 17 Using the brakes 1 53
4 1 7 1 Making sharp turns 1 5 3
4 18 Differential lock 1 54
4 19 Power take-off 1 55
4 19 1 General guidelines 1 5 5
5 Maintenance 1 57
5 1 lntroduction 1 59
5 2 Exclusive maintenance for new tractors (up to 100 hours of operation)
1?
5 3 Periodic maintenance tаЫе 1 62
5 4 Grease Lubrication Points 1 69
5 5 Access to service points 1 74
5 6 Servicing the air filtration system 1 75
5 6 1 Servicing the primary element 1 7 5
5 6 2 Removal of the primary element 1 7 5
5 6 3 Servicing the secondary element 1 7 6
5 6 4 Filtered air piping 1 7 6
5 6 5 Plastic housing of the filter element housing 1 7 6
5 6 6 Restriction indicator testing 1 7 7
5 7 Servicing the cooling system 1 78
5 7 1 External cleaning of the radiator 1 7 8
5 7 2 Radiator water level 1 78
5 7 3 Changing the water and cleaning the system 1 79
5 7 4 Looking after the thermostat valve and radiator сар 1 80
5 7 5 Checking and adjusting fan belt tension 1 8 1
5 8 Servicing the clutch 1 82
5 8 1 Adjusting the pedal height 1 8 2
5 8 2 Checking disengagement of the 2nd stage of the clutch 1 8 2
5 9 Servicing the transmission system 1 85
5 9 1 Cleaning the vents 1 8 5
5 9 2 Checking the hydraulic and transmission oil level 1 8 6
5 9 3 Changing the transmission and hydraulic oil 1 8 6
5 9 4 ISYP pump filter screen 1 8 8
5 9 5 Replacing the return filter 1 8 8
5 9 5 1 Procedure for replacing the return oil filter 1 89
5 9 6 Cleaning the suction filter 1 89
5 9 7 ldentification of hydraulic pumps 190
Servicing the rear final drives rear and front axle 1 91
5 10 1 Lubricating the rear final drives 19 1
5 10 2 Lubricating the front final drives – 4х 4 19 1
5 10 3 Changing the front planetary oil 19 1
5 10 4 Lubricating the front differential – 4х 4 19 2
5 10 5 Changing the front differential oil ( 4х 4} 19 2
5 10 6 Front hub adjustment 4х 2 193
5 1О 7 Removing front axle spindle slack ( 4х 2 t ractors} 194
Front wheel alignment 1 95
5 1 1 1 Adjustment procedure – 4х 2 axle 19 5
5 1 1 2 Adjusting the 4х 4 axle 196
Servicing the brakes 1 97
5 1 2 1 Bleeding the brake hydraulic drive system 19 7
5 1 2 1 1 Procedure for Ыeeding 19 7
5 1 2 2 Adjusting the free play of the pedals 19 8
5 1 2 3 Test for simultaneous activation of the brakes 199
Electrical system 200
5 13 1 Саге with the electrical system 2 0 0
5 13 2 Battery maintenance 2 0 1
5 1 3 3 Alternator and fan belt 2 0 4
5 1 3 4 Adjusting the headlights 2 0 5
5 13 5 Replacing bulbs in headlights and lights 2 0 6
5 1 3 5 1 Bulb of the rear work light (А}, auxiliary lights and front саЬ headlights
(В} 2 0 6
5 1 3 5 2 Round service light: 5 5 watts 2 0 8
5 1 3 5 3 Front position and hazard lights 2 09
5 1 3 5 4 Turn signals, hazard lights and brake lights 2 09
5 1 3 5 5 lnterior caЫight (courtesy light} 2 1О
5 1 3 5 6 lnterior dashboard lighting 2 1 1
5 1 3 5 7 Reverse warning sound 2 1 1
5 1 3 6 Replacement of relays and fuses 2 1 2
5 1 3 6 1 Main electrical panel – platform tractors 2 1 3
Servicing the air conditioner 21 4
5 14 1 Cleaning the condenser 2 1 4
5 14 2 Checking the compressor belt tension 2 1 4
5 1 4 3 Cleaning the саЬ air ventilation filter 2 1 5
5 1 4 4 Periodic general inspection 2 1 6
5 14 5 Refilling the gas (or refrigerant) 2 1 6
Tyre calibration and load 21 7
5 1 5 1 Calibration (PSI} х Load capacity (kg) 2 1 8
Storage of the tractor during inactive periods 220
5 1 6 1 Other procedures 2 2 1
5 1 6 1 1 Returning to work 2 2 2
6 Diagnosis of faults 223
6 1 Analysis of abnormalities, causes and solutions 225
7 MF4200 Specifications 231
7 1 Engine 233
7 1 1 General engine data 2 3 3
7 1 2 Lubrication system 2 3 3
7 1 3 Air filtration system 2 3 3
7 1 4 Fuel supply system 2 3 4
7 1 5 Cooling system 2 3 4
7 2 Electrical system – powers and capacities 235
MF4200
6269701М5
ТаЬ/е of contents
7 3 Clutch 23 6
7 4 Gearbox and creeper – types х application 237
7 5 Theoretical road speeds 238
7 6 Front and rear axle 240
7 6 1 Front axle 2 4 0
7 6 2 Rear axle 2 4 0
7 6 3 Wheel fixing torque 2 4 1
7 7 Hydraulic 244
7 7 1 Brakes 2 4 4
7 7 2 Hydrostatic steering 2 4 4
7 7 3 Hydraulic lift system 2 4 4
7 7 4 Remote control 2 4 5
7 8 Power take-off 24 6
7 9 Refilling capabllity – in litres 247
7 10 Draw bar 249
7 11 СаЬ and air conditioner 250
7 12 Dimensions and Weights of tractors 251
7 1 2 1 Dimensions and weights of standard tractors 2 5 1
7 1 2 2 Dimensions and weights – Compact Tractors 2 5 1
8 Accessories 253
8 1 Optional items availaЬle 255
9 Warranty 257
9 1 Warranty 259
9 1 1 Massey Ferguson Warranty Terms 2 5 9
9 1 2 lnstructions for technical delivery 2 5 9
9 1 3 Date log 2 6 1
9 1 4 Pre-delivery inspection 2 6 2
9 1 5 Free inspection 2 6 3
10 Glossary 265
11 lndex 267

Contact us: [email protected]

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V