Massey Ferguson SA MF9895 Series Operator’s Manual – PDF DOWNLOAD
DESCRIPTION:
Massey Ferguson SA MF9895 Series Operator’s Manual – PDF DOWNLOAD
A word to the operator:
- It is your responsibility to read and understand the safety section in this manual and the manual for all implements before you operate this machine. You are responsible for your safety. Good safety procedures prevent injury to you and the persons around you. Make the information in the safety section of this manual a part of your safety procedure.
- This safety section is written only for this type of machine. Safety is your responsibility. You can prevent injury and death. This safety section gives basic safety examples that can occur during the operation and maintenance of your machine. This safety section is not a replacement for safety instruction in other sections of this manual.
- Injury or death can occur if the safety instruction is not obeyed. Learn how to operate the machine and how to use the controls correctly. Do not operate the machine if you do not know how to operate the machine. Do not let persons operate the machine that do not know how to operate the machine. Follow all safety instructions in the manuals and on the safety signs on the machine, the implements, and the attachments. Use only approved attachments and implements. Make sure that your machine has the correct equipment that is necessary by the local regulations.
This manual
This manual covers general safety instructions for this machine. Keep this manual with the machine. Right and left, as used in this manual, are given as if you are in the operator seat. The photos, illustrations, and data used in this manual were up to date when published, but in-line production changes can make your machine have small differences. The manufacturer reserves the right to redesign and change the machine as necessary without notification.
Prepare for operation
- Read and understand the operating instructions and precautions in this manual before you operate or perform service оn the machine. Make sure that you know and understand the positions and operations of all controls. Make sure that all controls are in neutral and the parking brake is applied before you start the machine. Make sure that the steering wheel is in the center position and locked.
- Make sure that all persons are а sufficient distance from your area of work before you start or operate the machine. Do checks оn the controls and learn all controls in an area clear of persons and objects before you start work with the machine. Know the dimensions of the machine and have sufficient space available for operation.
- Do not operate the machine at high speeds around persons, buildings, other equipment, etc. Always use correct procedures when you do tasks around and operate the machine. Do not let children or persons who do not know how to operate the machine operate the machine. kеер other persons away from your area of work. Do not let other persons ride оn the machine. Make sure that the machine is in the good mechanical condition. Make sure that the machine has the correct equipment as necessary bу local regulations. All equipment has а limit. Make sure you understand the speed, brakes, steering, stability, and load characteristics of this equipment before you start.
TABLE OF CONTENTS:
Massey Ferguson SA MF9895 Series Operator’s Manual – PDF DOWNLOAD
Safety 15
1 1 General lnformation 17
1 1 1 Safety Alert Symbol 1 7
1 1 2 Safety Messages 1 7
1 1 3 lnformative Messages 1 7
1 1 3 1 Safety Signs 1 7
1 1 4 А Word to the Operator 1 8
1 1 4 1 Operator Manual 1 9
1 1 5 Ргераге for Operation 1 9
1 1 6 Operation 1 9
1 1 6 1 General lnformation 20
1 1 6 2 РРЕ (Personal Protection Equipment) 21
1 1 6 3 Seat lnstructions 22
1 1 6 4 Shield and Guards 22
1 1 6 5 Exhaust Warning 23
1 1 6 6 Flying Debris 23
1 1 6 7 Handrails 24
1 2 Travel оп PuЫic Roads 25
1 3 Safety in Maintenance 26
1 3 1 General lnformation 26
1 3 2 Fire Prevention and First Aid 28
1 3 3 Checking for High Pressure Leaks 29
1 3 4 Engine Safety 29
1 3 5 Adding Fuel 3 1
1 3 6 Battery Safety 3 1
1 3 7 Tire Safety 3 2
1 3 8 Accumulator Safety 3 2
1 4 Safety 33
1 4 1 Hazard Lamps 3 3
1 4 2 Beacon Lamps 3 3
1 4 3 Backup Alarm 3 3
1 4 4 Parking Brake 3 4
1 4 5 Fire Extinguisher 3 4
1 4 6 Header Lift Cylinder Stop 3 4
1 5 Safety Decals 35
1 5 1 Location of decals 3 5
1 5 1 1 Safety decals 40
1 5 1 2 Optional equipment 5 5
2 General lnformation 67
2 1 lntroduction 69
2 2 Units of Measurement 70
2 3 Replacement Parts 71
2 4 Location of the Serial Number ldentification Plate 72
2 5 Dealer lnformation 74
2 6 Main components of the machine 75
2 7 How а Comblne Works 76
2 8 Headers 78
2 9 Disposal 79
MF9895
6308788М1
ТаЬ/е of contents
2 1 О lntended Use 80
3 Operation 81
3 1 Running in the New Comblne 87
3 2 Running in the New Engine 88
3 3 Pre-Operation lnspection 89
3 4 Starting the Engine 90
3 4 1 Starting the Engine 9 0
3 4 2 Cold Weather 9 1
3 4 3 Normal start-up procedure in all weather conditions 9 1
3 5 Engine Stop 93
3 6 Transport Switch 94
3 7 Hydrostatic Transmission 95
3 7 1 Hydrostatic Transmission 9 5
3 7 2 Travel Speed Lever 9 6
3 7 3 Two-speed drive motor 9 6
3 7 4 Warm-up Procedure 9 6
3 7 5 Forward Travel 9 7
3 7 6 Reverse Travel 9 9
3 7 7 Stopping the Combine 9 9
3 8 Two-speed rear wheel drive assistant 1 оо
3 9 Towing the Comblne 102
3 1 О Transporting comblnes оп puЫic roads 103
3 10 1 Transporting Combines оп PuЫic Roads 10 3
3 10 2 Transporting the combine оп а trailer 10 3
3 10 3 AssemЫy 10 5
3 10 4 Checks before unloading 10 5
3 10 5 Combine AssemЫy 10 5
3 10 5 1 Wheels 10 5
3 10 5 2 Rear Axle Adjustment 10 6
3 10 5 3 Lighting and Mirrors 10 6
3 10 5 4 Fire Extinguisher 10 6
3 10 5 5 Slow Moving Vehicle EmЫem 10 7
3 10 5 6 Terminal 10 7
3 11 Towing the header using the comblne 108
3 12 Removing а stuck comblne 109
3 13 Ladders 110
3 13 1 Ladders 11О
3 13 2 Ladder and ladder rails 1 1 2
3 14 Guards and Latches 115
3 14 1 Guards and latches 1 15
3 14 2 Left-hand side shield 1 16
3 14 3 Right-hand side shields 1 16
3 14 4 Mud shields 1 17
3 14 5 Clean grain drive shield 1 18
3 14 6 Rear shield 1 18
3 15 Access panels 119
3 15 1 Access panels 1 19
3 15 2 Upper Engine Panel 1 19
3 15 3 Side Engine Panel 1 20
3 15 4 Rear Engine Panel 1 20
3 15 5 Separator access panels 1 20
3 15 6 Access panels to the feeder channel chain 1 2 1
3 15 7 Access panels t o the grain tank transmission Ьох 1 2 1
3 15 8 Access door t o the clean grain elevator poppet 1 2 1
MF9895
6308788М1
ТаЬ/е of contents
3 15 9 Са Ь Access Doors 1 2 2
3 16 Handrails 123
3 16 1 Handrails 1 23
3 16 2 Engine Platform Handrail 1 23
3 17 Steps 124
3 17 1 Steps 1 24
3 17 2 Right-Hand Side Folding Step 1 24
3 17 3 Left-hand side step 124
3 18 Header Lift Cylinder Stop 125
3 18 1 Неаdег Lift Cylinder Latch 1 25
3 18 2 Ргосеduге fог installing the cylinder latch 1 25
3 19 Operator’s СаЬ 126
3 19 1 lnterior Са Ь Light 1 26
3 19 2 Storage 1 26
3 19 3 lnstructor’s seat 1 27
3 19 4 Lighter 1 27
3 19 5 Auxiliary роwег sockets 1 27
3 19 6 Right-hand side са Ь window 1 28
3 19 7 Sun visor 1 29
3 19 8 Radio 1 29
3 20 Seats 130
3 20 1 Seats 13 0
3 20 2 Орегаtог Seat Switch 13 2
3 20 3 lnstructor’s Seat 13 2
3 21 Steering Column and Foot Controls 133
3 21 1 Steering column and foot controls 13 3
3 21 2 Вгаkе Pedals 13 4
3 21 3 lgnition Кеу 13 4
3 21 4 lndicator Switch 13 5
3 21 5 Ногn 13 5
3 21 6 Неаdег and Tow Light Malfunction Switch 13 5
3 22 Parking Brake 136
3 23 Comblne Lamps 137
3 23 1 Combine Lamps 13 7
3 23 2 Headlamps 13 8
3 23 3 Head Lamp Location 13 8
3 23 4 High and Low Beam Alternator 13 8
3 23 5 Rеаг work and ladder lamps 13 9
3 23 6 Combines with Two Rеаг Lamps 13 9
3 23 7 Combines with One Rear Lamp 13 9
3 23 8 Са Ь Exit Lights 1 4 0
3 23 9 Signal Lights – Rotating Beacon 1 4 0
3 23 1О Row Locator Lights 14 1
3 23 1 1 Unloader Tube Lights 1 4 2
3 23 1 2 Hazard Lamps 1 4 2
3 23 13 Service Lights 1 4 3
3 23 1 4 Engine Service Light Switch 1 4 3
3 24 Windscreen wiper 144
3 24 1 Windscreen wiper 1 4 4
3 24 2 Windshield Washer 1 4 4
3 25 Temperature Control 145
3 25 1 Automatic Temperature Control System 1 4 5
3 25 2 Temperature Display Units 1 4 7
3 26 Electric Rear-View Mirrors 149
3 27 Automatic Guidance (autopilot) 150
MF9895
6308788М1
ТаЬ/е of contents
3 28 Terminal 151
3 28 1 Terminal 15 1
3 28 2 Adjusting the Terminal Position 15 1
3 28 3 Terminal Components 15 1
3 28 4 Data Transfer 15 2
3 28 5 lnstalling USB Device 15 2
3 28 6 Terminal LEDs 15 3
3 28 7 Terminal Operation 15 4
3 28 8 Task Controller 15 6
3 28 9 Confirmation lcons 15 6
3 28 1О Application lcons 15 6
3 28 1 1 System Settings 15 7
3 28 1 2 Regional settings 15 8
3 28 13 Terminal settings 16 1
3 28 14 Auxiliary attributions 16 2
3 28 15 Advanced Functions 16 2
3 28 16 Video 16 4
3 28 17 Software Update 16 6
3 29 Comblne Operations 168
3 29 1 Combine Operations 16 8
3 29 2 Combine Menu lcons 16 8
3 29 3 Confirmation lcons 16 9
3 29 4 Combine Gauge Displays 16 9
3 29 5 Analog and Digital Value Display 1 7 0
3 29 6 Working main menu 17 1
3 29 7 Transportation Mode 17 1
3 29 8 Work Mode – Screen Configuration 17 1
3 29 9 Header Main Menu 17 7
3 29 1О DynaFlextm Draper Header Controls 17 7
3 29 1 1 Reel Control Menu 17 8
3 29 1 2 Header Control Menu 17 9
3 29 13 Combine Main Menu 18 2
3 29 14 Temperature/moisture 18 4
3 29 15 Yield 18 5
3 29 16 Feeder Channel 18 8
3 29 17 Rotor 18 8
3 29 18 Concave 19 0
3 29 19 Cleaning sieve 19 1
3 29 20 Unloading system 19 2
3 29 21 Automatic Settings 19 3
3 29 22 Grain loss 19 6
3 29 23 Axles 19 7
3 29 24 Сгор Data 19 9
3 29 25 Tailings Monitor 20 1
3 29 26 Engine main menu 20 2
3 29 27 Miscellaneous main menu 20 3
3 29 28 Software version 20 4
3 29 29 Setup 20 4
3 29 3 0 System Setup 20 6
3 29 3 1 Maintenance 20 6
3 29 3 2 Calibrations 20 7
3 29 3 3 VMM Diagnostic 217
3 29 3 4 mVEC Diagnostic 220
3 29 3 5 E M U Diagnostic 221
3 29 3 6 НММ Diagnostic 222
3 29 3 7 Vehicle and engine DTCs 224
3 29 3 8 Alarms 224
3 29 3 9 Messages and alarms 226
MF9895
6308788М1
3 30
ТаЬ/е of contents
3 29 40 First message and alarm агеа 226
3 29 41 Second message and alarm агеа 227
3 29 4 2 Third message and alarm агеа 228
3 29 4 3 4 th Message and Alarm Агеа 229
3 29 4 4 5th Message and Alarm Агеа 230
3 29 4 5 6 th alarm and message агеа 23 2
3 29 4 6 7th Message and Alarm Агеа 23 3
3 29 47 8th Message and Alarm Агеа 23 4
Control Console 236
3 30 1 Control Console 23 6
3 30 2 Cup Holder 23 6
3 30 3 Throttle Control Knob 23 6
3 30 4 Rotor overload light 23 7
3 30 5 Toggle Switches 23 7
3 30 6 Неаdег engagement switch 23 8
3 30 7 То Орегаtе the Header/ Feeder Reverser 23 8
3 30 8 Rocker switches 23 9
3 30 9 Reel Speed Control Knob 240
3 30 1 О Multi-function lever 240
3 30 1 1 Switches оп the multi-function lever 241
3 30 1 2 Согn Неаdег Electric Adjust Stripper Plates 24 2
3 30 1 3 VariaЫe Speed Header Drive 24 3
3 31 Tilt and Header Control Operation 244
3 3 1 1 Неаdег and tilt control operation 24 4
3 3 1 2 Manual header control 24 5
3 3 1 3 Automatic Неаdег Height Control (АННС) 24 5
3 3 1 4 Activation of the Automatic Неаdег Height Control 24 6
3 3 1 5 Operation of the Automatic Неаdег Height Control 247
3 3 1 6 Return to Cutting Height (RTC) 24 8
3 3 1 7 Return to Cutting Height activation 24 8
3 3 1 8 Return to Cutting Height operation 249
3 3 1 9 Float 250
3 3 1 1 О Activating Float 250
3 3 1 1 1 Float operation 251
3 3 1 1 2 Multiple Header Control Modes 25 2
3 3 1 1 3 Operating Multiple Неаdег Control Modes 25 2
3 3 1 1 4 Automatic Header Tilt Control (АНТС) 25 2
3 3 1 1 5 Activating Automatic Неаdег Tilt Control 25 3
3 3 1 1 6 Operation of the Automatic Неаdег Tilt Control 25 3
3 3 1 1 7 Неаdег Presets 25 4
3 32 Fuelling the Comblne 257
3 3 2 1 Fueling Combine 257
3 3 2 2 Biodiesel 257
3 3 2 3 Fuel additives 257
3 3 2 4 Storage 257
3 3 2 5 Fueling the Combine 25 8
3 33 Diesel Exhaust Fluid 259
3 3 3 1 Diesel Exhaust Fluid 259
3 3 3 2 Handling 259
3 3 3 3 Storage 259
3 3 3 4 Adding Diesel Exhaust Fluid 259
3 34 Header Tools 260
3 35 Headers 261
3 3 5 1 Headers 26 1
3 3 5 2 lnstallation 26 1
3 3 5 3 Removal of the combine header 26 2
3 36 Feeder 264
MF9895
6308788М1
ТаЬ/е of contents
3 3 6 1 Feeder Channel 26 4
3 3 6 2 Неаdег and feeder clutch 26 4
3 37 VariaЬle speed header engagement 265
3 3 7 1 VагiаЫе speed header drive 26 5
3 3 7 2 Setting the vагiаЫе speed header drive 26 5
3 3 7 3 Fог согn headers 26 7
3 38 Beater 269
3 39 Stone traps 270
3 40 Threshing Rotor 271
3 4 0 1 Threshing Rotor 27 1
3 4 0 2 Rotor speed 27 1
3 4 0 3 Rotor gеагЬох 27 2
3 41 Concaves 273
3 4 1 1 Concaves 27 3
3 4 1 2 Concave clearance 27 4
3 4 1 3 Concave accessories 27 4
3 4 1 4 lnterrupter Plates 27 5
3 4 1 5 Deflectors 27 5
3 42 Separator Grate 276
3 4 2 1 Separation grills 27 6
3 4 2 2 Separation grill covers 27 6
3 43 Upper Sieve Pre-cleaner 277
3 44 Separation Grill Рап 278
3 45 Cleaning Shoe (vibrator} 279
3 4 5 1 Cleaning sieve 27 9
3 4 5 2 AdjustaЫe uррег sieve 27 9
3 4 5 2 1 Manual adjustment 28 0
3 4 5 2 2 Electrical adjustment 28 0
3 4 5 3 AdjustaЫe lower sieve 28 1
3 4 5 3 1 Manual adjustment 28 1
3 4 5 3 2 Electrical adjustment 28 2
3 46 Cleaning Fan 283
3 4 6 1 Cleaning fan 28 3
3 4 6 2 Adjusting the fan speed 28 3
3 4 6 3 Cleaning Fan lnlet Duct 28 4
3 47 Clean Grain and Return Systems 285
3 4 7 1 Clean grain and return systems 28 5
3 4 7 2 Clean grain elevator 28 6
3 4 7 3 Grain Tailings Elevator 28 7
3 4 7 4 Clean-Out Doors 28 8
3 48 Grain Tank 289
3 4 8 1 Grain Tank 28 9
3 4 8 2 Grain sample 29 0
3 4 8 3 Grain tank cross auger соvег 29 0
3 4 8 4 Grain Tank Clean-Out Doors 29 0
3 4 8 5 Grain Tank Monitor Sensor 29 1
3 4 8 6 Lowering the Height of the Grain Tank 29 1
3 49 Unloading Material 293
3 4 9 1 Сгор Residue Unloading 29 3
3 4 9 2 Straw sргеаdег Drive 29 3
3 4 9 3 Straw сhоррег 29 3
3 4 9 3 1 Reversing the Straw Chopper 29 4
3 4 9 3 2 Movement of the straw chopper to the operating position 29 5
3 4 9 4 Straw Chopper Drive ( Review lmages of the Belt) 29 6
3 4 9 5 Cutting knife 29 8
MF9895
6308788М1
3 50
ТаЬ/е of contents
3 4 9 6 Straw Сhоррег Dоог 29 8
3 4 9 7 Spreader plate 29 9
3 4 9 8 Straw Sргеаdег 29 9
3 4 9 8 1 Straw Sргеаdег Curtain 3 0 1
Comblne Harvesting Configuration Guidelines 303
3 5 0 1 Combine Harvest Settings Guidelines 3 0 3
3 50 2 Settings Guidelines fог Specific Сгорs 3 0 3
3 5 0 3 Согn – Factory Settings 3 0 4
3 5 0 4 Dry Soil Согn 3 0 6
3 5 0 5 High-Moisture Согn ( 18- 24%) 3 0 8
3 5 0 6 High-Moisture Согn (mоге than 24%) 3 1О
3 5 0 7 Wheat 3 1 2
3 5 0 8 Soy Bean – Factory Settings 3 14
3 5 0 9 Dry Soybean 3 16
3 5 0 1О Soybean with hard green stalks 3 18
3 5 0 1 1 Sorghum 3 20
3 5 0 1 2 Lentils 3 22
3 5 0 13 Rapeseed 3 24
3 5 0 14 Вагlеу 3 26
4 Adjustments 329
4 1 Drive Alignment 331
4 1 1 Drive Alignment 3 3 1
4 1 2 Guide Wheel Alignment 3 3 1
4 1 3 Ring gеаг angular misalignment 3 3 2
4 1 4 Tracing Angular Misalignment 3 3 3
4 2 Drive Belts 334
MF9895
6308788М1
4 2 1 Drive belt 3 3 4
4 2 2 lnstalling the V belt 3 3 5
4 2 3 Rotor Drive Belt 3 3 5
4 2 3 1 Belt Removal and lnstallation 3 3 6
4 2 4 Pump Drive Belt 3 3 6
4 2 4 1 Belt Removal and lnstallation 3 3 7
4 2 5 Right Angle GеагЬох Drive Belt 3 3 9
4 2 5 1 Belt Removal and lnstallation 3 3 9
4 2 6 Return Elevator Drive Belt 3 4 1
4 2 6 1 Belt Removal and lnstallation 3 4 1
4 2 7 Feeder lmpeller Drive Belt 3 4 2
4 2 7 1 Removal and lnstallation 3 4 3
4 2 8 Feeder lntermediate Shaft Drive Belt 3 4 4
4 2 8 1 Removal and lnstallation 3 4 4
4 2 9 Unloader Drive Belt 3 4 5
4 2 9 1 Belt Removal and lnstallation 3 4 5
4 2 1О Pitman Drive Belt 3 4 7
4 2 10 1 Belt Removal and lnstallation 3 4 7
4 2 1 1 Clean Grain Elevator Drive Belt 3 4 8
4 2 1 1 1 Belt Removal and lnstallation 3 4 8
4 2 1 2 Cleaning Fan Drive Belt 3 4 9
4 2 1 2 1 Belt Removal and lnstallation 3 4 9
4 2 13 VагiаЫе Speed Неаdег Drive Belt 3 5 0
4 2 13 1 Belt Removal and lnstallation 3 5 2
4 2 14 Fixed Speed Неаdег Drive Belt 3 5 3
4 2 14 1 Belt Removal and lnstallation 3 5 4
4 2 15 Pivot Shaft Drive Belt 3 5 4
4 2 15 1 Belt Removal and lnstallation 3 5 4
4 2 16 Straw Spreader Drive Belt 3 5 5
4 2 17 Straw Chopper Ргimагу Drive Belt 3 5 5
ТаЬ/е of contents
4 2 17 1 Belt Removal and lnstallation 3 5 5
4 2 18 Straw Chopper Secondary Drive Belt 3 5 6
4 2 18 1 Belt Removal and lnstallation 3 5 6
4 2 19 Alternator and Compressor Drive Belt 3 5 7
4 2 2 0 Lower Alternator Drive Belt 3 5 7
4 2 2 1 Water Pump Drive Belt 3 5 8
4 3 Chains 359
4 3 1 Chains 3 5 9
4 3 2 Tank Loader Tube Drive Chain 3 5 9
4 3 3 Feeder Chain 3 5 9
4 3 4 Feeder lnverter Chain 3 6 0
4 3 5 Clean Grain Elevator Chain 3 6 0
4 3 5 1 Chain Removal and lnstallation 3 6 1
4 3 6 Return Elevator Chain 3 6 1
4 3 6 1 Chain Removal and lnstallation 3 6 2
4 4 Concave 363
4 5 Discharge Deflectors 365
4 6 Feeder Channel Drum Stop 366
4 7 Adjusting the Sensor 368
4 8 Adjusting the Ground Speed СаЫе 3 7 2
4 8 1 Adjusting the Ground Speed СаЫе 3 7 2
4 8 2 Adjusting the Са Ь 3 7 2
4 8 3 Propulsion Pump Adjustment 3 7 2
4 9 Transmission Shift СаЫе Adjustment 3 7 3
4 1 О Axles 3 7 4
4 10 1 Axles 3 7 4
4 10 2 AdjustaЫe steering shaft 3 7 8
4 10 2 1 Adjusting the Steering Stop 3 7 8
4 10 2 2 Height 3 7 9
4 10 2 3 Toe-in 3 7 9
4 10 3 AdjustaЫe Rear Wheel Assistant Shaft 3 8 0
4 10 3 1 Adjusting the Steering Stop 3 8 0
4 10 3 2 Height 3 8 1
4 10 3 3 Toe-in 3 8 1
4 11 Brakes 382
4 1 1 1 Brakes 3 8 2
4 1 1 2 Parking Brake Adjustment 3 8 2
4 12 СаЬ Lighting 383
5 Lubrication and Servicing 385
5 1 Comblne Lubrication and Servicing 3 89
5 2 Lubrication and servicing charts 390
5 2 1 New Machine 3 9 0
5 2 2 Periodic servicing charts 3 9 0
5 2 2 1 Servicing the engine 3 9 0
5 2 2 2 Servicing the front and геаг axles 3 9 1
5 2 2 3 Harvest system maintenance 3 9 3
5 2 2 4 Servicing the hydraulic system 3 9 5
5 2 2 5 Servicing the electrical system 3 9 6
5 2 2 6 Servicing the Са Ь 3 9 6
5 3 Lubrication points 3 97
5 3 1 Left-hand side grease fittings 3 9 7
5 3 2 Right-hand side grease fittings 4 0 1
5 4 Chains 409
5 5 Elevator Chains 4 1о
MF9895
6308788М1
5 6
5 7
ТаЬ/е of contents
Engine Oil 4 1 1
5 6 1 Engine Oil 41 1
5 6 2 Checking the oil level 41 1
5 6 3 Replacing the engine oil and filters 41 2
Fuel Filter 4 1 4
5 7 1 Fuel filter 41 4
5 7 2 Replacing the fuel filter and the fuel/water separator filter 41 4
5 8 Engine Air Cleaner 4 1 7
5 8 1 Engine intake system air filters 41 7
5 8 2 External filter element 41 8
5 8 3 lnternal Filter Element 41 8
5 9 Engine Coolant 4 1 9
5 9 1 Engine Coolant 41 9
5 9 2 Coolant level 41 9
5 9 3 Draining the engine ‘ s cooling system 4 20
5 9 4 Topping up the engine ‘ s cooling system 4 20
5 1 О Cooling systems assemЬly 422
5 1 1 Windscreen washer reservoir 424
5 1 2 Cleaning the СаЬ Window 425
5 1 2 1 СаЬ glass cleaning 4 25
5 1 2 2 СаЬ rear window 4 25
5 1 3 Temperature Control System 426
5 1 3 1 Temperature control system 4 26
5 1 3 2 СаЬ air filters 4 26
5 1 3 3 Secondary filter 4 27
5 1 3 4 Recirculation filter 4 27
5 1 3 5 Procedure for cleaning the air filter 4 27
5 1 4 Electrical system 428
5 1 4 1 Electrical system 4 28
5 1 4 2 Battees 4 28
5 1 4 2 1 Location of the battery 4 29
5 1 4 2 2 Removing the battery 4 29
5 1 4 2 3 Battery connectors 4 29
5 1 4 2 4 Battery shutoff switch 4 30
5 1 4 2 5 Battery storage 4 30
5 1 4 2 6 Recharging the battery 4 30
5 1 4 2 7 Jump start 4 30
5 1 4 3 Electrical distribution centres 4 3 1
5 1 4 3 1 СаЬ electrical distribution centres (CEDC} 4 3 2
5 1 4 3 2 Forward electrical distribution centre (FEDC} 4 3 6
5 1 4 3 3 mVEC 3 4 3 6
5 1 4 3 4 mVEC 4 4 3 7
5 1 4 3 5 Fuses F4 and F5 4 3 8
5 1 4 3 6 Rear left-hand side electrical distribution centre (REDC- L} 4 3 8
5 1 4 3 7 mVEC 1 4 3 9
5 1 4 3 8 Power distribution Ьох (PDB} 4 40
5 1 4 3 9 Rear right-hand side electrical distribution centre (REDC-R} 4 41
5 1 4 3 10 mVEC 2 4 41
5 1 4 4 Cleaning the alternator screen 4 4 2
5 1 4 5 Changing headlight bulbs 4 4 3
5 1 5 Hydraulic System 444
MF9895
6308788М1
5 1 5 1 Checking the fluid level 4 4 4
5 1 5 2 Hydraulic oil filter 4 4 4
5 1 5 3 Hydraulic Reservoir Breather Сар 4 4 5
5 1 5 4 Changing the hydraulic oil 4 4 5
5 1 5 5 Main hydraulic control valve Ыосk 4 47
ТаЬ/е of contents
5 15 5 1 Port locations 4 4 8
5 15 5 2 Location and function of the solenoids 4 4 9
5 15 6 Drive clutch control valve Ыосk 4 5 0
5 15 7 Fan control valve Ыосk 4 5 0
5 15 8 Control valve Ыосk for rotor reverse 4 5 0
5 15 9 Priority control valve Ыосk 4 5 1
5 15 1О Control valve Ыосk for lateral tilt 4 5 1
5 16 Transmission 452
5 16 1 Checking and changing the lubricant 4 5 2
5 17 Final drive 453
5 17 1 Final drive 4 5 3
5 17 2 Changing the final drive oil 4 5 3
5 18 Brakes 454
5 18 1 Master cylinder fluid reservoir 4 5 4
5 18 2 Bleeding the fuel system 4 5 4
5 19 Drive transmission boxes 456
5 19 1 Rotor drive transmission case 4 5 6
5 19 2 Angular transmission case 4 5 7
5 19 3 Unloader drive angular transmission case 4 5 8
5 20 Concaves 460
5 20 1 Removal 4 6 0
5 20 2 lnstallation 4 6 0
5 20 3 Concave wires 4 6 1
5 20 4 Concave deflectors 4 6 1
5 20 5 Concave covers 4 6 1
5 20 6 Stop plates 4 6 3
5 21 Separation Grates 465
5 21 1 Removal 4 6 5
5 21 2 lnstallation 4 6 5
5 21 3 Separation grill deflector 4 6 6
5 21 4 Separation channel grate covers 4 6 6
5 22 Rotor 467
5 23 Unloader tube drive fuse bolt 469
5 23 1 Shear bolt for the unload tube auger 4 6 9
5 23 2 Replacing the fuse bolt 4 7 0
5 23 2 1 Replacing the unloader drive shear bolt 4 7 0
5 23 2 2 Replacing а shear bolt оп the universal joint of the unload tube auger 4 7 1
5 24 Straw chopper 472
5 25 Lifting points 475
5 26 Tyres and Wheels 477
5 26 1 Tyres and wheels 4 7 7
5 26 2 Dual wheels 477
5 26 3 Tyre servicing 4 7 7
5 26 4 Removing the wheel from the combine 4 7 8
5 26 5 Wheel lnstallation 4 8 0
5 27 Preparation for off-season storage 481
5 28 Preparation for use after storage 482
5 29 Components’ Speed 483
5 29 1 Speed of components 4 8 3
5 29 2 Left-hand drives 4 8 3
5 29 3 Right-hand drives 4 8 5
5 29 4 Rear Drives 4 8 6
6 TrouЬleshooting 489
6 1 Headers 491
MF9895
6308788М1
ТаЬ/е of contents
6 1 1 Cutting header 4 9 1
6 1 2 Согn header 4 9 2
6 2 Processing 4 95
6 2 1 Threshing system 4 9 5
6 2 2 Separation 4 9 6
6 2 3 Cleaning 4 9 6
6 2 4 Tailings 4 9 7
6 3 Engine 4 98
6 4 Propulsion hydrostatic system 5 01
6 4 1 Hydrostatic tгansmission system 5 0 1
6 4 2 ТаЫеs of hydrostatic transmission proЫems 5 0 1
6 5 Hydraulic system 5 04
6 6 Terminal 5 05
6 7 Fieldstar® 1 1 5 06
6 7 1 Yield sensor 5 0 6
6 7 2 Moisture sensor 5 0 8
6 7 3 GPS 5 0 8
7 Specifications 5 11
7 1 Harvest system 5 13
7 1 1 Supply system 5 13
7 1 2 Threshing system 5 13
7 1 2 1 Concave 5 13
7 1 2 2 Separation grills 5 1 4
7 1 2 3 Fan 5 1 4
7 1 2 4 Pre-cleaning sieve 5 1 4
7 1 2 5 cleaning shoes 5 1 4
7 1 2 6 Elevators 5 15
7 1 3 Grain tank 5 15
7 1 4 Accessories 5 15
7 2 Engine 5 16
7 2 1 Basic engine specifications 5 16
7 2 1 1 Роwег and torques 5 16
7 3 Transmission 5 17
7 3 1 Speed range 5 17
7 4 Hydraulic 5 18
7 4 1 Rеаг Axle – Steering 5 18
7 4 2 Hydraulic system 5 18
7 4 2 1 Pumps 5 18
7 4 2 2 Hydraulic motors 5 18
7 4 2 3 Cylinders 5 19
7 5 * Electrical system 5 2 1
7 5 1 Battery 5 21
7 6 Weights and dimensions 5 2 2
7 6 1 Weights 5 22
7 6 2 Dimensions 5 22
7 7 Capacities 5 2 4
7 7 1 General lubrication 5 24
7 8 Wheels and Tyres 5 2 5
7 8 1 Front tyres 5 25
7 8 2 Rear tyres 5 25
7 8 3 Torque Chart fог wheels 5 25
7 9 Headers 5 2 6
8 Accessories and Optional ltems 5 2 7
MF9895
6308788М1
ТаЬ/е of contents
8 1 Precision Agriculture 529
8 1 1 Autopilot (Auto-guide) 5 29
8 1 2 Telemetrics 5 29
8 2 Threshing System – Separation 530
8 2 1 Processor concaves 5 3 0
8 2 2 Separator grates 5 3 0
8 2 3 Stone trap Ьох kit 5 3 0
8 3 Threshing System – Cleaning 531
8 3 1 Cleaning sieves 5 3 1
8 3 2 Cleaning sieve dividers 5 3 1
8 3 3 Cleaning sieves with electrical opening adjustment 5 3 2
8 3 4 Perforated elevator doors 5 3 2
8 4 Grain Tank 533
8 4 1 Unload tube extension 5 3 3
9 lndex 535
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
- You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
- Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted
S.V