Mustang 250Z Compact Excavator Operator’s Manual 50940255 – PDF DOWNLOAD

Description

Mustang 250Z Compact Excavator Operator’s Manual 50940255 – PDF DOWNLOAD

FILE DETAILS:

Mustang 250Z Compact Excavator Operator’s Manual 50940255 – PDF DOWNLOAD

Language : English
Pages : 326
Downloadable : Yes
File Type : PDF
Size: 64.3 MB

DESCRIPTION:

Mustang 250Z Compact Excavator Operator’s Manual 50940255 – PDF DOWNLOAD

Introduction:

• This Operation and Maintenance Manual for the Mustang Z250 Excavator is designed to
  provide you with important information and suggestions necessary for using the machine with
  safety and effi-ciency.
• Please be sure to read through the manual before using the machine, to
  make yourself familiar with the procedures and instructions for operating, inspecting and
  servicing. Keep in mind that failure to observe the precautions given in the manual or using
  any procedures not pre-scribed in the manual may cause a serious accident.

Product Overview
3.1 Intended uses
The Excavator is intended to perform the following tasks:
• Digging
• Leveling of ground
• Shoveling
• Ditching and Guttering
• Loading
For the details of how to work with the machine, refer to OPERATION Section “3. Operations
using the bucket” on page 181.
3.2 Break in period
The machine should not be subjected to severe stresses and loads during the initial break in
period although it has been prepared well and stringently inspected before shipping. Otherwise
the machine’s performance may be affected and its service life shortened. Thus it is essential to
break in the machine for the first approx. 100 service hours (reading of the hour meter).
In breaking in the machine:
• You should warm up the engine by idling for 5 minutes before starting operations.
• You should not operate the machine under heavy loads or at high speed.
• You should not start and accelerate the engine too abruptly, or stop it too abruptly.
• You should not change travel direction too abruptly.
The safety instructions for operation and maintenance that are presented in this Manual are applicable
to each of the intended tasks. Never misuse this machine by violating the applicable safety
instructions or by attempting to perform unintended tasks, because of the danger of serious bodily
injury.

TABLE OF CONTENTS:

Mustang 250Z Compact Excavator Operator’s Manual 50940255 – PDF DOWNLOAD

00-01 Introduction pdf 0
1 Introduction 5
00-02 Safety Information pdf 0
2 Safety Information 6
00-03 Product Overview pdf 0
3 Product Overview 7
3 1 Intended uses 7
3 2 Break in period 7
3 3 Conditions to be met to assure compliance with EPA emission standards 8
3 4 Emission system warranty Garantie du systéme antipollution 9
3 5 Acquisition of Information on Machines in Operation and Handling of Acquired Information 13
00-04 Operation License pdf 0
4 Operation License 14
00-05 Ordering Replacement Parts and Service Call pdf 0
5 Ordering Replacement Parts and Service Call 15
5 1 Location of machine serial number plate 15
5 2 Location of engine serial number plate 15
5 3 Location of EPA emission control plate Localisation de la plaque signalétique EPA 16
5 4 Ordering replacement parts and service calls 17
01 SAFETY TOP pdf 0
SAFETY 37
01-01 Basic Precautions pdf 0
1 Basic Precautions 38
01-02 Operating Precautions pdf 0
2 Operating Precautions 45
2 1 Precautions before starting the engine 45
2 2 Precautions for starting the engine, working and parking 48
2 3 Precautions for transportation 55
2 4 Precautions for the battery 56
2 5 Precautions for towing 58
01-03 Precautions for Servicing pdf 0
3 Precautions for Servicing 59
3 1 Precautions before servicing 59
3 2 Precautions during servicing 62
01-04 Safety Messages (Warning Labels) pdf 0
4 Safety Messages (Warning Labels) 68
4 1 Location of warning labels 68
02 OPERATIONTOC pdf 0
OPERATION 79
02-01 Identification of Important Parts pdf 0
1 Identification of Important Parts 81
1 1 Overview of the machine 81
1 2 Controls and switches 83
02-02 Description of Control Devices pdf 0
2 Description of Control Devices 84
2 1 LCD monitor 84
2 2 Switches 117
2 3 Control levers and pedals 122
2 4 Engine hood rear cover 127
2 5 Bonnet B 128
2 6 Bonnet R 129
2 7 Storage space for the operation & maintenance manual 130
2 8 Windshield (cabin type) 131
2 9 Emergency escape hammer (cabin type) 134
2 10 Operator’s seat 135
2 11 Ash tray (cabin type) 135
2 12 Work lights 136
2 13 Air outlet (cabin type) 137
2 14 Right window glass (cabin type) 137
2 15 Cabin side door (cabin type) 138
2 16 Replenishment of windshield washer fluid (cabin type) 139
2 17 Fuse 140
2 18 External power outlet 144
02-03 Operating Instructions pdf 0
3 Operating Instructions 145
3 1 Checking before starting the engine 145
3 2 Starting up the engine 161
3 3 Operating and checking instructions after starting the engine 166
3 4 Traveling 169
3 5 Steering 173
3 6 Stopping the machine 175
3 7 Swinging the upperstructure 176
3 8 Operating the implements 177
3 9 Precautions for operating the implement 178
3 10 Precautions for working 181
3 11 Precautions for going up and down a slope 182
3 12 Escaping from the mud 184
3 13 Operations using the bucket 185
3 14 Parking the machine 187
3 15 Inspection requirements after completing operation 189
3 16 Stopping the engine 190
3 17 Inspection requirements after stopping the engine 191
3 18 Locking 191
3 19 Handling the rubber track (for rubber track type) 192
3 20 Replacing the bucket without the quick coupler 0
3 21 Reversing the bucket without the quick coupler 0
3 22 Handling quick coupler (option) 197
3 23 Handling hydraulic P T O 207
3 24 Releasing the internal pressure of the hydraulic circuit by accumulator 214
3 25 Handling SMARTASSIST-Remote (option) 216
02-04 Transportation pdf 0
4 Transportation 218
4 1 Loading and unloading the machine 218
4 2 Precautions for loading the machine 220
4 3 Precautions for transporting the machine 221
4 4 Suspending the machine 222
02-05 Care and Service in Cold Weather pdf 0
5 Care and Service in Cold Weather 224
5 1 Preparing for cold weather 224
5 2 Precautions after a day’s work 227
5 3 After cold weather ends 227
02-06 Long-term Storage pdf 0
6 Long-term Storage 228
6 1 Before storing 228
6 2 Storing 230
6 3 Using the machine again 230
02-07 Troubleshooting pdf 0
7 Troubleshooting 231
7 1 Phenomena that are not breakdowns 231
7 2 Towing 232
7 3 If the battery is overdischarged 233
7 4 Troubleshooting 238
03 MAINTENANCETOC pdf 0
MAINTENANCE 241
03-01 Precautions for Servicing pdf 0
1 Precautions for Servicing 242
03-02 Basic Servicing Practices pdf 0
2 Basic Servicing Practices 245
2 1 Oils, fuel, and coolant 246
2 2 Electrical equipment 251
2 3 Hydraulic system 252
03-03 Consumables pdf 0
3 Consumables 254
03-04 Fueling_Oiling and Greasing Based on Temperature Range pdf 0
4 Fueling, Oiling and Greasing Based on Temperature Range 255
4 1 Fuel and oil 255
4 2 Coolant 255
03-05 Standard Tightening Torque for Bolts and Nuts pdf 0
5 Standard Tightening Torque for Bolts and Nuts 256
5 1 Required tools 256
5 2 Torque table 257
03-06 Replacing Essential Parts Periodically pdf 0
6 Replacing Essential Parts Periodically 258
03-07 Maintenance Table pdf 0
7 Maintenance Table 260
7 1 Table of service time intervals 260
7 2 Service intervals when using the hydraulic breaker 264
03-08 Procedures for Maintenance pdf 0
8 Procedures for Maintenance 265
8 1 First services 265
8 2 Nonperiodic services 266
8 3 Checking before start-up 282
8 4 Maintenance every 50 service hours 283
8 5 Maintenance every 100 service hours 284
8 6 Maintenance every 250 service hours 284
8 7 Maintenance every 500 service hours 291
8 8 Maintenance every 1000 service hours 296
8 9 Maintenance every 1500 service hours 300
8 10 Maintenance every 2000 service hours 300
8 11 Maintenance every 3000 service hours 304
04 SPECIFICATIONS AND DIMENSIONAL DIAGRAMSTOC pdf 0
SPECIFICATIONS AND DIMENSIONAL DIAGRAMS 306
04-01 Specifications and Dimensional Diagrams pdf 0
1 Specifications and Dimensional Diagrams 307
05 OPTIONAL PARTS AND ATTACHMENTSTOC pdf 0
OPTIONAL PARTS AND ATTACHMENTS 311
05-01 General Precautions pdf 0
1 General Precautions 312
1 1 Safety precautions 312
1 2 Precautions for mounting an attachment (implement) 314
05-02 Optional Parts and Attachments pdf 0
2 Optional Parts and Attachments 315
2 1 Optional parts and attachments 315
06 APPENDIX TABLETOC pdf 0
APPENDIX TABLE 317
06-01 APPENDIX TABLE pdf 0
1 List of consumables 318
2 Fuel, oil and coolant 319
3 Required tools 320
4 Torque table 321
5 List of essential parts 322
6 List of error codes displayed on LCD monitor 323
00-00 QUICK GUIDE pdf 0
QUICK GUIDE 18
Mustang OMM pdf 0
00-01 Introduction pdf 0
1 Introduction 0
00-02 Safety Information pdf 0
2 Safety Information 0
00-03 Product Overview pdf 0
3 Product Overview 0
3 1 Intended uses 0
3 2 Break in period 0
3 3 Conditions to be met to assure compliance with EPA emission standards 0
3 4 Emission system warranty 0
3 5 Acquisition of Information on Machines in Operation and Handling of Acquired Information 0
00-05 Ordering Replacement Parts and Service Call pdf 0
5 Ordering Replacement Parts and Service Call 0
5 1 Location of machine serial number plate 0
5 2 Location of engine serial number plate 0
5 3 Location of EPA emission control plate 0
5 4 Ordering replacement parts and service calls 0
00-04 Operation License pdf 0
4 Operation License 0
01-01 Basic Precautions pdf 0
1 Basic Precautions 0
01-02 Operating Precautions pdf 0
2 Operating Precautions 0
2 1 Precautions before starting the engine 0
2 2 Precautions for starting the engine, working and parking 0
2 3 Precautions for transportation 0
2 4 Precautions for the battery 0
2 5 Precautions for towing 0
2 6 Precautions for engines and exhaust gas treatment equipment 0
01-03 Precautions for Servicing pdf 0
3 Precautions for Servicing 0
3 1 Precautions before servicing 0
3 2 Precautions during servicing 0
01-04 Safety Messages (Warning Labels) pdf 0
4 Safety Messages (Warning Labels) 0
4 1 Location of warning labels 0
02-01 Identification of Important Parts pdf 0
1 Identification of Important Parts 0
1 1 Overview of the machine 0
1 2 Controls and switches 0
02-02 Description of Control Devices pdf 0
2 Description of Control Devices 0
2 1 LCD monitor 0
2 2 Switches 0
2 3 Control levers and pedals 0
2 4 Engine hood rear cover 0
2 5 Bonnet B 0
2 6 Bonnet R 0
2 7 Operator’s seat bottom cover 0
2 8 Storage space for the operation & maintenance manual 0
2 9 Tool storage 0
2 10 Drink holder 0
2 11 Utility box (without air conditioner) 0
2 12 Windshield (cabin type) 0
2 13 Emergency escape hammer (cabin type) 0
2 14 Operator’s seat 0
2 15 Ash tray (cabin type) 0
2 16 Work lights 0
2 17 Right window glass (cabin type) 0
2 18 Cabin side door (cabin type) 0
2 19 Replenishment of windshield washer fluid (cabin type) 0
2 20 Handling air conditioner (option) 0
2 21 Fuse 0
2 22 External power outlet 0
02-03 Operating Instructions pdf 0
3 Operating Instructions 0
3 1 Checking before starting the engine 0
3 2 Starting up the engine 0
3 3 Operating and checking instructions after starting the engine 0
3 4 Traveling 0
3 5 Steering 0
3 6 Stopping the machine 0
3 7 Swinging the upper structure 0
3 8 Operating the implements 0
3 9 Precautions for operating the implement 0
3 10 Precautions for working 0
3 11 Precautions for going up and down a slope 0
3 12 Escaping from the mud 0
3 13 Operations using the bucket 0
3 14 Parking the machine 0
3 15 Inspection requirements after completing operation 0
3 16 Stopping the engine 0
3 17 Inspection requirements after stopping the engine 0
3 18 Locking 0
3 19 Handling the rubber track (for rubber track type) 0
3 20 Replacing the bucket without the quick coupler 0
3 21 Reversing the bucket without the quick coupler 0
3 22 Handling quick coupler (option) 0
3 23 Handling hydraulic P T O 0
3 24 Releasing the internal pressure of the hydraulic circuit by accumulator 0
3 25 Handling diesel particulate filter (DPF) 0
3 26 Handling SMARTASSIST-Remote (option) 0
02-04 Transportation pdf 0
4 Transportation 0
4 1 Loading and unloading the machine 0
4 2 Precautions for loading the machine 0
4 3 Precautions for transporting the machine 0
4 4 Suspending the machine 0
02-05 Care and Service in Cold Weather pdf 0
5 Care and Service in Cold Weather 0
5 1 Preparing for cold weather 0
5 2 Precautions after a day’s work 0
5 3 After cold weather ends 0
02-06 Long-term Storage pdf 0
6 Long-term Storage 0
6 1 Before storing 0
6 2 Storing 0
6 3 Using the machine again 0
02-07 Troubleshooting pdf 0
7 Troubleshooting 0
7 1 Phenomena that are not breakdowns 0
7 2 Towing 0
7 3 If the battery is overdischarged 0
7 4 Troubleshooting 0
03-01 Precautions for Servicing pdf 0
1 Precautions for Servicing 0
03-02 Basic Servicing Practices pdf 0
2 Basic Servicing Practices 0
2 1 Diesel fuel 0
2 2 Engine oil 0
2 3 Engine cooling water 0
2 4 Hydraulic oil and reduction gear oil 0
2 5 Handling grease, oil, fuel and filters 0
2 6 Electrical equipment 0
2 7 Hydraulic system 0
03-03 Consumables pdf 0
3 Consumables 0
03-04 Fueling, Oiling and Greasing Based on Temperature Range pdf 0
4 Fueling, Oiling and Greasing Based on Temperature Range 0
4 1 Fuel and oil 0
4 2 Cooling water 0
03-05 Standard Tightening Torque for Bolts and Nuts pdf 0
5 Standard Tightening Torque for Bolts and Nuts 0
5 1 Required tools 0
5 2 Torque table 0
03-06 Replacing Essential Parts Periodically pdf 0
6 Replacing Essential Parts Periodically 0
03-07 Maintenance Table pdf 0
7 Maintenance Table 0
7 1 Table of service time intervals 0
7 2 Service intervals when using the hydraulic breaker 0
03-08 Procedures for Maintenance pdf 0
8 Procedures for Maintenance 0
8 1 First services 0
8 2 Non-periodic services 0
8 3 Checking before start-up 0
8 4 Maintenance every 50 service hours 0
8 5 Maintenance every 100 service hours 0
8 6 Maintenance every 250 service hours 0
8 7 Maintenance every 500 service hours 0
8 8 Maintenance every 1000 service hours 0
8 9 Maintenance every 1500 service hours 0
8 10 Maintenance every 2000 service hours 0
8 11 Maintenance every 3000 service hours 0
04-01 Specifications and Dimensional Diagrams pdf 0
1 Specifications and Dimensional Diagrams 0
05-01 General Precautions pdf 0
1 General Precautions 0
1 1 Safety precautions 0
1 2 Precautions for mounting an attachment (implement) 0
06-01 APPENDIX TABLE pdf 0
1 List of consumables 0
2 Fuel, oil and cooling water 0
3 Required tools 0
4 Torque table 0
5 List of essential parts 0
6 List of error codes displayed on LCD monitor 0
00-01 Introduction pdf 0
1 Introduction 0
00-02 Safety Information pdf 0
2 Safety Information 0
00-03 Product Overview pdf 0
3 Product Overview 0
3 1 Intended uses 0
3 2 Break in period 0
3 3 Conditions to be met to assure compliance with EPA emission standards 0
3 4 Emission system warranty 0
3 5 Acquisition of Information on Machines in Operation and Handling of Acquired Information 0
00-04 Operation License pdf 0
4 Operation License 0
00-05 Ordering Replacement Parts and Service Call pdf 0
5 Ordering Replacement Parts and Service Call 0
5 1 Location of machine serial number plate 0
5 2 Location of engine serial number plate 0
5 3 Location of EPA emission control plate 0
5 4 Ordering replacement parts and service calls 0
01-01 Basic Precautions pdf 0
1 Basic Precautions 0
01-02 Operating Precautions pdf 0
2 Operating Precautions 0
2 1 Precautions before starting the engine 0
2 2 Precautions for starting the engine, working and parking 0
2 3 Precautions for transportation 0
2 4 Precautions for the battery 0
2 5 Precautions for towing 0
2 6 Precautions for engines and exhaust gas treatment equipment 0
01-03 Precautions for Servicing pdf 0
3 Precautions for Servicing 0
3 1 Precautions Before Servicing 0
3 2 Precautions during servicing 0
01-03 Precautions for Servicing pdf 0
3 Precautions for Servicing 0
3 1 Precautions Before Servicing 0
3 2 Precautions during servicing 0
01-04 Safety Messages (Warning Labels) pdf 0
4 Safety Messages (Warning Labels) 0
4 1 Location of warning labels 0
01-04 Safety Messages (Warning Labels) pdf 0
4 Safety Messages (Warning Labels) 0
4 1 Location of warning labels 0
02-01 Identification of Important Parts pdf 0
1 Identification of Important Parts 0
1 1 Overview of the machine 0
1 2 Controls and switches 0
02-02 Description of Control Devices pdf 0
2 Description of Control Devices 0
2 1 LCD monitor 0
2 2 Switches 0
2 3 Control levers and pedals 0
2 4 Engine hood rear cover 0
2 5 Bonnet B 0
2 6 Bonnet R 0
2 7 Operator’s seat bottom cover 0
2 8 Storage space for the operation & maintenance manual 0
2 9 Tool storage 0
2 10 Drink holder 0
2 11 Utility box (without air conditioner) 0
2 12 Windshield (cabin type) 0
2 13 Emergency escape hammer (cabin type) 0
2 14 Operator’s seat 0
2 15 Ash tray (cabin type) 0
2 16 Work lights 0
2 17 Right window glass (cabin type) 0
2 18 Cabin side door (cabin type) 0
2 19 Replenishment of windshield washer fluid (cabin type) 0
2 20 Handling air conditioner (option) 0
2 21 Fuse 0
2 22 External power outlet 0
02-03 Operating Instructions pdf 0
3 Operating Instructions 0
3 1 Checking before starting the engine 0
3 2 Starting up the engine 0
3 3 Operating and checking instructions after starting the engine 0
3 4 Traveling 0
3 5 Steering 0
3 6 Stopping the machine 0
3 7 Swinging the upper structure 0
3 8 Operating the implements 0
3 9 Precautions for operating the implement 0
3 10 Precautions for working 0
3 11 Precautions for going up and down a slope 0
3 12 Escaping from the mud 0
3 13 Operations using the bucket 0
3 14 Parking the machine 0
3 15 Inspection requirements after completing operation 0
3 16 Stopping the engine 0
3 17 Inspection requirements after stopping the engine 0
3 18 Locking 0
3 19 Handling the rubber track (for rubber track type) 0
3 20 Handling quick coupler (option) 0
3 21 Handling hydraulic P T O 0
3 22 Releasing the internal pressure of the hydraulic circuit by accumulator 0
3 23 Handling diesel particulate filter (DPF) 0
3 24 Handling SMARTASSIST-Remote (option) 0
02-04 Transportation pdf 0
4 Transportation 0
4 1 Loading and unloading the machine 0
4 2 Precautions for loading the machine 0
4 3 Precautions for transporting the machine 0
4 4 Suspending the machine 0
02-05 Care and Service in Cold Weather pdf 0
5 Care and Service in Cold Weather 0
5 1 Preparing for cold weather 0
5 2 Precautions after a day’s work 0
5 3 After cold weather ends 0
02-06 Long-term Storage pdf 0
6 Long-term Storage 0
6 1 Before storing 0
6 2 Storing 0
6 3 Using the machine again 0
02-07 Troubleshooting pdf 0
7 Troubleshooting 0
7 1 Phenomena that are not breakdowns 0
7 2 Towing 0
7 3 If the battery is discharged 0
7 4 Troubleshooting 0
03-01 Precautions for Servicing #2 pdf 0
1 Precautions for Servicing 0
03-02 Basic Servicing Practices pdf 0
2 Basic Servicing Practices 0
2 1 Diesel fuel 0
2 2 Engine oil 0
2 3 Engine cooling water 0
2 4 Hydraulic oil and reduction gear oil 0
2 5 Handling grease, oil, fuel and filters 0
2 6 Electrical equipment 0
2 7 Hydraulic system 0
03-03 Consumables pdf 0
3 Consumables 0
03-03 Consumables pdf 0
3 Consumables 0
03-04 Fueling, Oiling and Greasing Based on Temperature Range pdf 0
4 Fueling, Oiling and Greasing Based on Temperature Range 0
4 1 Fuel and oil 0
4 2 Cooling water 0
03-05 Standard Tightening Torque for Bolts and Nuts pdf 0
5 Standard Tightening Torque for Bolts and Nuts 0
5 1 Required tools 0
5 2 Torque table 0
03-06 Replacing Essential Parts Periodically pdf 0
6 Replacing Essential Parts Periodically 0
03-07 Maintenance Table pdf 0
7 Maintenance Table 0
7 1 Table of service time intervals 0
7 2 Service intervals when using the hydraulic breaker 0
03-08 Procedures for Maintenance pdf 0
8 Procedures for Maintenance 0
8 1 First services 0
8 2 Non-periodic services 0
8 3 Checking before start-up 0
8 4 Maintenance every 50 service hours 0
8 5 Maintenance every 100 service hours 0
8 6 Maintenance every 250 service hours 0
8 7 Maintenance every 500 service hours 0
8 8 Maintenance every 1000 service hours 0
8 9 Maintenance every 1500 service hours 0
8 10 Maintenance every 2000 service hours 0
8 11 Maintenance every 3000 service hours 0
04-01 Specifications and Dimensional Diagrams pdf 0
1 Specifications and Dimensional Diagrams 0
05-01 General Precautions pdf 0
1 General Precautions 0
1 1 Safety precautions 0
1 2 Precautions for mounting an attachment (implement) 0
06-01 APPENDIX TABLE pdf 0
1 List of consumables 0
2 Fuel, oil and cooling water 0
3 Required tools 0
4 Torque table 0
5 List of essential parts 0
6 List of error codes displayed on LCD monitor 0
00-01 Introduction pdf 0
1 Introduction 0
00-01 Introduction pdf 0
1 Introduction 0
00-02 Safety Information pdf 0
2 Safety Information 0
00-03 Product Overview pdf 0
3 Product Overview 0
3 1 Intended uses 0
3 2 Break in period 0
3 3 Conditions to be met to assure compliance with EPA emission standards 0
3 4 Emission system warranty 0
3 5 Acquisition of Information on Machines in Operation and Handling of Acquired Information 0
00-04 Operation License pdf 0
4 Operation License 0
00-05 Ordering Replacement Parts and Service Call pdf 0
5 Ordering Replacement Parts and Service Call 0
5 1 Location of machine serial number plate 0
5 2 Location of engine serial number plate 0
5 3 Location of EPA emission control plate 0
5 4 Ordering replacement parts and service calls 0
01-01 Basic Precautions pdf 0
1 Basic Precautions 0
01-02 Operating Precautions pdf 0
2 Operating Precautions 0
2 1 Precautions before starting the engine 0
2 2 Precautions for starting the engine, working and parking 0
2 3 Precautions for transportation 0
2 4 Precautions for the battery 0
2 5 Precautions for towing 0
2 6 Precautions for engines and exhaust gas treatment equipment 0
01-03 Precautions for Servicing pdf 0
3 Precautions for Servicing 0
3 1 Precautions Before Servicing 0
3 2 Precautions during servicing 0
01-04 Safety Messages (Warning Labels) pdf 0
4 Safety Messages (Warning Labels) 0
4 1 Location of warning labels 0
01-04 Safety Messages (Warning Labels) pdf 0
4 Safety Messages (Warning Labels) 0
4 1 Location of warning labels 0
02-01 Identification of Important Parts pdf 0
1 Identification of Important Parts 0
1 1 Overview of the machine 0
1 2 Controls and switches 0
02-02 Description of Control Devices pdf 0
2 Description of Control Devices 0
2 1 LCD monitor 0
2 2 Switches 0
2 3 Control levers and pedals 0
2 4 Engine hood rear cover 0
2 5 Bonnet B 0
2 6 Bonnet R 0
2 7 Operator’s seat bottom cover 0
2 8 Storage space for the operation & maintenance manual 0
2 9 Tool storage 0
2 10 Drink holder 0
2 11 Utility box (without air conditioner) 0
2 12 Windshield (cabin type) 0
2 13 Emergency escape hammer (cabin type) 0
2 14 Operator’s seat 0
2 15 Ash tray (cabin type) 0
2 16 Work lights 0
2 17 Right window glass (cabin type) 0
2 18 Cabin side door (cabin type) 0
2 19 Replenishment of windshield washer fluid (cabin type) 0
2 20 Handling air conditioner (option) 0
2 21 Fuse 0
2 22 External power outlet 0
02-03 Operating Instructions pdf 0
3 Operating Instructions 0
3 1 Checking before starting the engine 0
3 2 Starting up the engine 0
3 3 Operating and checking instructions after starting the engine 0
3 4 Traveling 0
3 5 Steering 0
3 6 Stopping the machine 0
3 7 Swinging the upper structure 0
3 8 Operating the implements 0
3 9 Precautions for operating the implement 0
3 10 Precautions for working 0
3 11 Precautions for going up and down a slope 0
3 12 Escaping from the mud 0
3 13 Operations using the bucket 0
3 14 Parking the machine 0
3 15 Inspection requirements after completing operation 0
3 16 Stopping the engine 0
3 17 Inspection requirements after stopping the engine 0
3 18 Locking 0
3 19 Handling the rubber track (for rubber track type) 0
3 20 Handling quick coupler (option) 0
3 21 Handling hydraulic P T O 0
3 22 Releasing the internal pressure of the hydraulic circuit by accumulator 0
3 23 Handling diesel particulate filter (DPF) 0
3 24 Handling SMARTASSIST-Remote (option) 0
02-04 Transportation pdf 0
4 Transportation 0
4 1 Loading and unloading the machine 0
4 2 Precautions for loading the machine 0
4 3 Precautions for transporting the machine 0
4 4 Suspending the machine 0
02-05 Care and Service in Cold Weather pdf 0
5 Care and Service in Cold Weather 0
5 1 Preparing for cold weather 0
5 2 Precautions after a day’s work 0
5 3 After cold weather ends 0
02-06 Long-term Storage pdf 0
6 Long-term Storage 0
6 1 Before storing 0
6 2 Storing 0
6 3 Using the machine again 0
02-07 Troubleshooting pdf 0
7 Troubleshooting 0
7 1 Phenomena that are not breakdowns 0
7 2 Towing 0
7 3 If the battery is discharged 0
7 4 Troubleshooting 0
03-01 Precautions for Servicing pdf 0
1 Precautions for Servicing 0
03-02 Basic Servicing Practices pdf 0
2 Basic Servicing Practices 0
2 1 Diesel fuel 0
2 2 Engine oil 0
2 3 Engine cooling water 0
2 4 Hydraulic oil and reduction gear oil 0
2 5 Handling grease, oil, fuel and filters 0
2 6 Electrical equipment 0
2 7 Hydraulic system 0
03-03 Consumables pdf 0
3 Consumables 0
03-04 Fueling, Oiling and Greasing Based on Temperature Range pdf 0
4 Fueling, Oiling and Greasing Based on Temperature Range 0
4 1 Fuel and oil 0
4 2 Cooling water 0
03-05 Standard Tightening Torque for Bolts and Nuts pdf 0
5 Standard Tightening Torque for Bolts and Nuts 0
5 1 Required tools 0
5 2 Torque table 0
03-06 Replacing Essential Parts Periodically pdf 0
6 Replacing Essential Parts Periodically 0
03-07 Maintenance Table pdf 0
7 Maintenance Table 0
7 1 Table of service time intervals 0
7 2 Service intervals when using the hydraulic breaker 0
03-08 Procedures for Maintenance pdf 0
8 Procedures for Maintenance 0
8 1 First services 0
8 2 Non-periodic services 0
8 3 Checking before start-up 0
8 4 Maintenance every 50 service hours 0
8 5 Maintenance every 100 service hours 0
8 6 Maintenance every 250 service hours 0
8 7 Maintenance every 500 service hours 0
8 8 Maintenance every 1000 service hours 0
8 9 Maintenance every 1500 service hours 0
8 10 Maintenance every 2000 service hours 0
8 11 Maintenance every 3000 service hours 0
04-01 Specifications and Dimensional Diagrams pdf 0
1 Specifications and Dimensional Diagrams 0
05-01 General Precautions pdf 0
1 General Precautions 0
1 1 Safety precautions 0
1 2 Precautions for mounting an attachment (implement) 0
06-01 APPENDIX TABLE pdf 0
1 List of consumables 0
2 Fuel, oil and cooling water 0
3 Required tools 0
4 Torque table 0
5 List of essential parts 0
6 List of error codes displayed on LCD monitor 0
Mustang OMM pdf 0
00-01 Introduction pdf 0
1 Introduction 0
00-02 Safety Information pdf 0
2 Safety Information 0
00-03 Product Overview pdf 0
3 Product Overview 0
3 1 Intended uses 0
3 2 Break in period 0
3 3 Conditions to be met to assure compliance with EPA emission standards 0
3 4 Emission system warranty Garantie du systéme antipollution 0
3 5 Acquisition of Information on Machines in Operation and Handling of Acquired Information 0
00-04 Operation License pdf 0
4 Operation License 0
00-05 Ordering Replacement Parts and Service Call pdf 0
5 Ordering Replacement Parts and Service Call 0
5 1 Location of machine serial number plate 0
5 2 Location of engine serial number plate 0
5 3 Location of EPA emission control plate Localisation de la plaque signalétique EPA 0
5 4 Ordering replacement parts and service calls 0
00-00 QUICK GUIDE pdf 0
QUICK GUIDE 0
01 SAFETY TOP pdf 0
SAFETY 0
01-01 Basic Precautions pdf 0
1 Basic Precautions 0
01-02 Operating Precautions pdf 0
2 Operating Precautions 0
2 1 Precautions before starting the engine 0
2 2 Precautions for starting the engine, working and parking 0
2 3 Precautions for transportation 0
2 4 Precautions for the battery 0
2 5 Precautions for towing 0
01-03 Precautions for Servicing pdf 0
3 Precautions for Servicing 0
3 1 Precautions before servicing 0
3 2 Precautions during servicing 0
01-04 Safety Messages (Warning Labels) pdf 0
4 Safety Messages (Warning Labels) 0
4 1 Location of warning labels 0
02 OPERATIONTOC pdf 0
OPERATION 0
02-01 Identification of Important Parts pdf 0
1 Identification of Important Parts 0
1 1 Overview of the machine 0
1 2 Controls and switches 0
02-02 Description of Control Devices pdf 0
2 Description of Control Devices 0
2 1 LCD monitor 0
2 2 Switches 0
2 3 Control levers and pedals 0
2 4 Engine hood rear cover 0
2 5 Bonnet B 0
2 6 Bonnet R 0
2 7 Storage space for the operation & maintenance manual 0
2 8 Windshield (cabin type) 0
2 9 Emergency escape hammer (cabin type) 0
2 10 Operator’s seat 0
2 11 Ash tray (cabin type) 0
2 12 Work lights 0
2 13 Air outlet (cabin type) 0
2 14 Right window glass (cabin type) 0
2 15 Cabin side door (cabin type) 0
2 16 Replenishment of windshield washer fluid (cabin type) 0
2 17 Fuse 0
2 18 External power outlet 0
02-03 Operating Instructions pdf 0
3 Operating Instructions 0
3 1 Checking before starting the engine 0
3 2 Starting up the engine 0
3 3 Operating and checking instructions after starting the engine 0
3 4 Traveling 0
3 5 Steering 0
3 6 Stopping the machine 0
3 7 Swinging the upperstructure 0
3 8 Operating the implements 0
3 9 Precautions for operating the implement 0
3 10 Precautions for working 0
3 11 Precautions for going up and down a slope 0
3 12 Escaping from the mud 0
3 13 Operations using the bucket 0
3 14 Parking the machine 0
3 15 Inspection requirements after completing operation 0
3 16 Stopping the engine 0
3 17 Inspection requirements after stopping the engine 0
3 18 Locking 0
3 19 Handling the rubber track (for rubber track type) 0
3 20 Replacing the bucket without the quick coupler 0
3 21 Reversing the bucket without the quick coupler 0
3 22 Handling quick coupler (option) 0
3 23 Handling hydraulic P T O 0
3 24 Releasing the internal pressure of the hydraulic circuit by accumulator 0
3 25 Handling SMARTASSIST-Remote (option) 0
02-04 Transportation pdf 0
4 Transportation 0
4 1 Loading and unloading the machine 0
4 2 Precautions for loading the machine 0
4 3 Precautions for transporting the machine 0
4 4 Suspending the machine 0
02-05 Care and Service in Cold Weather pdf 0
5 Care and Service in Cold Weather 0
5 1 Preparing for cold weather 0
5 2 Precautions after a day’s work 0
5 3 After cold weather ends 0
02-06 Long-term Storage pdf 0
6 Long-term Storage 0
6 1 Before storing 0
6 2 Storing 0
6 3 Using the machine again 0
02-07 Troubleshooting pdf 0
7 Troubleshooting 0
7 1 Phenomena that are not breakdowns 0
7 2 Towing 0
7 3 If the battery is overdischarged 0
7 4 Troubleshooting 0
03 MAINTENANCETOC pdf 0
MAINTENANCE 0
03-01 Precautions for Servicing pdf 0
1 Precautions for Servicing 0
03-02 Basic Servicing Practices pdf 0
2 Basic Servicing Practices 0
2 1 Oils, fuel, and coolant 0
2 2 Electrical equipment 0
2 3 Hydraulic system 0
03-03 Consumables pdf 0
3 Consumables 0
03-04 Fueling_Oiling and Greasing Based on Temperature Range pdf 0
4 Fueling, Oiling and Greasing Based on Temperature Range 0
4 1 Fuel and oil 0
4 2 Coolant 0
03-05 Standard Tightening Torque for Bolts and Nuts pdf 0
5 Standard Tightening Torque for Bolts and Nuts 0
5 1 Required tools 0
5 2 Torque table 0
03-06 Replacing Essential Parts Periodically pdf 0
6 Replacing Essential Parts Periodically 0
03-07 Maintenance Table pdf 0
7 Maintenance Table 0
7 1 Table of service time intervals 0
7 2 Service intervals when using the hydraulic breaker 0
03-08 Procedures for Maintenance pdf 0
8 Procedures for Maintenance 0
8 1 First services 0
8 2 Nonperiodic services 0
8 3 Checking before start-up 0
8 4 Maintenance every 50 service hours 0
8 5 Maintenance every 100 service hours 0
8 6 Maintenance every 250 service hours 0
8 7 Maintenance every 500 service hours 0
8 8 Maintenance every 1000 service hours 0
8 9 Maintenance every 1500 service hours 0
8 10 Maintenance every 2000 service hours 0
8 11 Maintenance every 3000 service hours 0
04 SPECIFICATIONS AND DIMENSIONAL DIAGRAMSTOC pdf 0
SPECIFICATIONS AND DIMENSIONAL DIAGRAMS 0
04-01 Specifications and Dimensional Diagrams pdf 0
1 Specifications and Dimensional Diagrams 0
05 OPTIONAL PARTS AND ATTACHMENTSTOC pdf 0
OPTIONAL PARTS AND ATTACHMENTS 0
05-01 General Precautions pdf 0
1 General Precautions 0
1 1 Safety precautions 0
1 2 Precautions for mounting an attachment (implement) 0
06 APPENDIX TABLETOC pdf 0
APPENDIX TABLE 0
06-01 APPENDIX TABLE pdf 0
1 List of consumables 0
2 Fuel, oil and coolant 0
3 Required tools 0
4 Torque table 0
5 List of essential parts 0
6 List of error codes displayed on LCD monitor 0

IMAGES PREVIEW OF THE MANUAL:

Contact us: [email protected]

https://vimeo.com/805514373

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V