New Holland B100C B100C LR B100C TC B110C B110C TC B115C Stage IIIB Tractor Loader Backhoe Operator’s Manual 47987179 – PDF DOWNLOAD

Description

New Holland B100C B100C LR B100C TC B110C B110C TC B115C Stage IIIB Tractor Loader Backhoe Operator’s Manual 47987179 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland B100C B100C LR B100C TC B110C B110C TC B115C Stage IIIB Tractor Loader Backhoe Operator’s Manual 47987179 – PDF DOWNLOAD

GENERAL INFORMATION:
Note to the owner:

• Read this manual before you start the engine or operate the machine. If you need more information, see your NEW
  HOLLAND CONSTRUCTION dealer.
• This manual contains important information about the safe operation, adjustment, and maintenance of your loader
  backhoe. This manual is divided into chapters as outlined in the table of contents. Refer to the index at the end of this
  manual for locating specific items about your machine. The loader backhoe conforms to current safety regulations.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation, and maintenance
  so as to avoid the risk of injury while operating or servicing the machine. The machine has been designed and
  manufactured according to the strictest quality standards and complies with the standard 2006/42/EC. However, the
  risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and
  precautions.
• DO NOT operate or permit anyone to operate or service this machine until you or the other persons have read and
  understand the safety, operation, and maintenance instructions in this manual. Use only trained operators who have
  demonstrated the ability to operate and service this machine correctly and safely.
• The information in this manual is provided on the basis of information that was available at the time that the manual
  was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
  the service that is given to the machine. Ensure that you have the complete and most current information from your
  dealer before you start any machine operation.
• Store the operator’s manual in the manual compartment equipped on this machine. Make sure this manual is complete and in good condition. Consult your dealer to obtain additional manuals or manuals in other languages.
• Contact your dealer for any further information or assistance about your machine. Your dealer has NEW HOLLAND
  CONSTRUCTION approved service parts. Your dealer has technicians with special training that know the best methods of repair and maintenance for your machine.

TABLE OF CONTENTS:

New Holland B100C B100C LR B100C TC B110C B110C TC B115C Stage IIIB Tractor Loader Backhoe Operator’s Manual 47987179 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the owner 1-1
Intended use 1-2
Electro-Magnetic Compatibility (EMC) 1-4
Manual scope and required training level 1-5
Product identification 1-7
Operator’s manual storage on the machine 1-11
Machine orientation 1-12
Machine components 1-14
Official documents 1-17
Exhaust Gas Recirculation (EGR) system 1-21
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Safety rules 2-2
Seat belt 2-11
Fire extinguisher 2-12
Personal Protective Equipment (PPE) 2-13
Safety rules – Fuel handling precautions 2-14
Safety rules – Specific precautions to this machine 2-15
Safety rules – Ductile iron 2-16
Loader attachment safety strut 2-17
Ecology and the environment 2-20
Hand signals 2-21
Safety signs 2-28
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Access to operator’s platform 3-1
OPERATOR’S SEAT
Operator’s seat 3-4
FORWARD CONTROLS
Front controls 3-10
Steering column 3-12
Pedal controls 3-13
Parking brake lever 3-14
Transmission controls 3-15
RIGHT-HAND SIDE CONTROLS
Right-hand side controls 3-21
EXTERIOR CONTROLS
Rotating beacon (optional) 3-23
Battery master switch 3-24
INSTRUMENT CLUSTER
Instrument cluster – Front 3-25
Instrument cluster panel 3-27
Regenerating the Diesel Particulate Filter (DPF) automatically/manually 3-33
Regeneration inhibit 3-37
Oil life reset 3-39
Display brightness 3-40
Throttle sensitivity 3-41
Maximum throttle/Cold start idle 3-42
Instrument cluster – Side (B100C – B100CTC – B110C – B110CTC – B115C) 3-44
CAB CONTROLS AND ADJUSTMENTS
Cab and platform – Control identification 3-46
LOADER ATTACHMENT CONTROLS
Loader attachment controls 3-51
Loader attachment – Operation 3-52
Loader bucket control – 4×1 (If fitted) 3-54
Locking the loader attachment controls – (Specific to certain countries) 3-55
BACKHOE ATTACHMENT CONTROLS
Backhoe attachment controls 3-56
Backhoe attachment mechanical controls 3-59
Backhoe attachment hydraulic controls 3-69
CLIMATE CONTROLS
Heating and air conditioning controls 3-75
Cab air louvers 3-80
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Before using the machine 4-1
Operating the machine 4-2
Running-in period 4-4
STARTING THE UNIT
Starting the engine 4-5
Assisted starting (Jump-starting) 4-7
Starting the engine – At temperatures below – 18 °C (– 0 4 °F) (Optional) 4-9
Starting the engine – At low temperatures with “grid heater” (Optional) 4-10
Anti-theft protection 4-11
STOPPING THE UNIT
Stopping the engine 4-12
MOVING THE UNIT
Job site travel 4-13
2WD or 4WD 4-15
Steer selection (4WS) 4-16
Differential lock button 4-19
PARKING THE UNIT
Parking the machine 4-20
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Requirements for road travel 5-1
Precautions for road travel 5-3
PREPARING FOR ROAD TRANSPORT
Preparing the machine for road travel 5-4
SHIPPING TRANSPORT
Machine transport (on a trailer) 5-10
RECOVERY TRANSPORT
Towing the machine 5-11
6 WORKING OPERATIONS
GENERAL INFORMATION
Operating the machine in cold weather 6-1
Operating the machine in high altitude 6-2
Operating the machine in water 6-3
Lifting the machine 6-4
LOADER ATTACHMENT
Organizing the job site 6-5
Transmission disconnect button 6-6
Operating the loader attachment 6-7
Loader attachment safety strut 6-10
Loader bucket – Removal 6-13
Loader bucket – Installation 6-15
Loader bucket with forks (optional) 6-16
Lifting loads with the loader attachment 6-18
BACKHOE ATTACHMENT
Backhoe attachment 6-20
Setting the backhoe attachment in working position 6-21
Backhoe attachment (Side shift version) 6-25
Stabilizer pads 6-26
Operating the backhoe attachment 6-28
Backhoe bucket – Remove 6-33
Backhoe bucket – Install 6-34
Backhoe bucket – Digging angle 6-35
Ballasting 6-36
Lifting loads with backhoe attachment 6-39
7 MAINTENANCE
GENERAL INFORMATION
Fluids and lubricants 7-1
Exhaust Gas Recirculation (EGR) exhaust treatment – Basic instructions – Resetting the
oil life monitoring system 7-3
General specification – Diesel fuel 7-4
General specification – Biodiesel fuels 7-5
Fuel tank 7-7
Hydraulic oil 7-8
Organic Acid Technology (OAT) coolant 7-9
Recommended engine oil for operating temperature ranges 7-11
Maintenance safety 7-12
Work hours and intervals 7-14
MAINTENANCE CHART
Maintenance chart 7-16
Every 10 hours
Checks at start-up and before each workshift (10 hours) 7-18
Drive belts – Check 7-19
Hydraulic hoses, tubes, and fittings 7-20
Engine oil level 7-21
Hydraulic oil level 7-23
Fuel tank level 7-25
Engine coolant 7-26
Windshield washer fluid level 7-27
Check wheels and tires 7-28
Working attachments 7-29
Every 50 hours
Fuel pre-filter – Drain condensation 7-31
Tire pressure 7-32
Door hinges 7-36
Working attachments – greasing 7-37
Every 250 hours
Cab protection system 7-39
Seat and seat belt 7-42
Cab air filter 7-43
Heater and evaporator (Air-conditioning system) 7-46
Fuel tank – Drain fluid 7-47
Air-conditioning compressor drive belt 7-48
Air-conditioning compressor seals 7-49
Radiator and condenser – Cleaning 7-50
Transmission oil level 7-52
Front and rear axle 7-53
Hydraulic oil tank breather / filler cap – cleaning 7-64
Battery terminals 7-65
Telescopic dipper 7-66
Every 500 hours
Engine oil and filter 7-67
Fuel filter 7-70
Fuel prefilter 7-71
Every 1000 hours
Machine inspection and cleaning 7-72
Fire extinguisher 7-73
Engine air filters 7-74
Power shuttle transmission – Oil filter replacement 7-76
Power shuttle transmission – Oil change 7-77
Power shuttle transmission – Screen filter cleaning 7-78
Powershift transmission – Oil filter replacement 7-80
Powershift transmission – Oil change 7-81
Front and rear axles oil 7-82
Brake pedal lever – Greasing 7-88
Hydraulic oil filter 7-89
Hydraulic oil 7-91
Hydraulic cylinders 7-93
Alternator 7-94
Every 2000 hours
Engine cooling system – Change fluid 7-95
Every 3000 hours
Diesel Particulate Filter (DPF) 7-98
Every 4000 hours
Engine breather filter 7-99
As required
Drive belt 7-100
Air-conditioning compressor drive belt 7-102
Turbocharger – Check 7-103
Fuel system bleeding 7-104
Air filter element 7-105
Wheels and tires 7-109
Parking brake 7-113
Hydraulic system – Release pressure 7-114
Bulbs 7-117
Fuses and relays 7-120
Telematics system fuses (if equipped) 7-127
Battery removal and installation 7-128
Stabilizers (side shift) – Clearance check and adjustment 7-129
Telescopic dipper (if equipped) 7-130
Bucket teeth – replacement 7-131
Loader bucket – Self-leveling adjustment 7-132
STORAGE
Machine storage 7-133
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Troubleshooting 8-1
Engine – Troubleshooting 8-3
Starter motor – Troubleshooting 8-5
Alternator – Troubleshooting 8-6
Transmission – Troubleshooting 8-7
Axles – Troubleshooting 8-10
Steering system – Troubleshooting 8-13
Hydraulic systems – Troubleshooting 8-14
Loader attachment – Troubleshooting 8-15
Backhoe attachment – Troubleshooting 8-16
Swing – Troubleshooting 8-17
Hydraulic pump – Troubleshooting 8-18
Electrical systems – Troubleshooting 8-19
Cab – Troubleshooting 8-20
Air-conditioning system – Troubleshooting 8-21
9 SPECIFICATIONS
Fluids and lubricants 9-1
Engine 9-2
Powertrain 9-4
Brakes and controls – General specification 9-5
Brakes and controls – General specification 9-7
Hydraulics 9-9
Front counterweight 9-10
Noise and vibration levels 9-11
Buckets 9-12
Tires 9-13
Dimensions and performance 9-16
Performance of loader attachment with forks 9-31
Backhoe attachment performance 9-35
Backhoe attachment lifting capacity 9-54
10 ACCESSORIES
Mechanical loader bucket quick coupler 10-1
Mechanical backhoe bucket quick coupler 10-2
Backhoe attachment auxiliary hydraulic tools 10-3
Manual auxiliary hydraulic tools 10-4
Backhoe attachment safety valves 10-5
Reversible stabilizer pads 10-6
Telematics – Overview with New Holland FleetForce™ 10-7

Questions? Email us: [email protected]

https://vimeo.com/733213873

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V