New Holland B90B B90BLR B100B B100BLR B110B B115B Backhoe Loaders Operator’s Manual 84277762 – PDF DOWNLOAD

Description

New Holland B90B B90BLR B100B B100BLR B110B B115B Backhoe Loaders Operator’s Manual 84277762 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland B90B B90BLR B100B B100BLR B110B B115B Backhoe Loaders Operator’s Manual 84277762 – PDF DOWNLOAD

FOREWORD:

• The loader backhoes B90B – B90BLR – B100B – B100BLR – B110B – B115B have been designed to perform most earth-moving operations.
• If you use this machine for duties involving the use of attachments, accessories, or special tools, consult your Dealer to make sure that the adaptations or modifications carried out are in conformity with the machine’s technical specifications and with current regulations on safety.
• Any modifications or adaptations which are not approved by the Manufacturer may invalidate the machine’s original conformity with safety requirements.

DESIGNATED USE:

The machine has been built in accordance with state-of-the-art standards and the recognized safety rules. The machine must be used in accordance with its designated use, by observing the safety and precautionary rules and by strictly following the operating instructions. Any functional disorders, especially those affecting the safety of the machine, should therefore be rectified immediately.

TABLE OF CONTENTS:

New Holland B90B B90BLR B100B B100BLR B110B B115B Backhoe Loaders Operator’s Manual 84277762 – PDF DOWNLOAD

1 – INTRODUCTION, SAFETY, PLATES AND DECALS
2 – CONTROLS AND INSTRUMENTS
3 – OPERATING THE MACHINE
4 – SUPPLIES AND MAINTENANCE CHART
5 – TROUBLESHOOTING
6 – STORAGE
7 – ACCESSORIES
8 – DATA AND TECHNICAL SPECIFICATIONS
9 – ALPHABETICAL INDEX
ATTACHMENT 1 – “EC” DECLARATION OF CONFORMITY

SECTION 1
INTRODUCTION, SAFETY, PLATES AND DECALS 1-1
FOREWORD 1-1
DESIGNATED USE 1-1
MAIN COMPONENTS 1-3
SAFETY INSTRUCTIONS 1-6
GENERAL SAFETY INSTRUCTIONS 1-6
BEFORE USING THE MACHINE 1-7
OPERATING THE MACHINE 1-10
PARKING THE MACHINE 1-13
MAINTENANCE AND ADJUSTMENTS 1-14
PREVENTION OF FIRE OR EXPLOSIONS 1-16
PREVENTION OF BURNS 1-17
LEVEL OF VIBRATIONS TRANSMITTED TO THE OPERATOR 1-18
PRECAUTIONS FOR WASTE DISPOSAL 1-19
COMPONENT IDENTIFICATION PLATES 1-20
DECALS 1-24
NOISE LEVEL DECAL 1-24
POSITION OF DECALS 1-25
HAND SIGNALS 1-33
SECTION 2
CONTROLS AND INSTRUMENTS 2-1
FRONT INSTRUMENT CLUSTER PANEL 2-1
SIDE INSTRUMENT CLUSTER PANEL (B90B) 2-3
SIDE INSTRUMENT CLUSTER PANEL (B100B – B110B – B115B) 2-5
SIDE INSTRUMENT CLUSTER (B90B) 2-10
SIDE INSTRUMENT CLUSTER (B100B – B110B – B115B) 2-12
OPERATOR’S COMPARTMENT CONTROLS 2-14
STARTER SWITCH KEY 2-14
STEERING WHEEL 2-14
DIRECTION INDICATOR SWITCH (B90B ROPS) 2-15
LEVER FOR DIRECTION INDICATORS, MAIN BEAMS,
FRONT WINDSHIELD WIPER AND
WASHER (CAB) 2-16
TRANSMISSION CONTROLS 2-17
HORN BUTTON 2-34
ENGINE ACCELERATOR CONTROLS 2-35
BRAKES 2-36
WHEEL STEER MODE SWITCH (4WS) 2-37
CAB 2-38
OPERATOR’S SEAT 2-46
SEAT (VINYL AND DE LUXE MODEL) 2-47
SEAT (DE LUXE MODEL, PNEUMATIC VERSION) 2-48
LOADER ATTACHMENT CONTROLS 2-49
LOADER ATTACHMENT OPERATION 2-49
4×1 LOADER BUCKET CONTROL (If fitted) 2-52
TRANSMISSION DISCONNECT BUTTON 2-53
LOCKING THE LOADER ATTACHMENT CONTROLS (Specific to certain countries) 2-53
BACKHOE ATTACHMENT CONTROLS 2-54
INDEX
BACKHOE ATTACHMENT MECHANICAL CONTROLS VERSION 2-55
BACKHOE ATTACHMENT HYDRAULIC CONTROLS 2-65
HEATING AND AIR CONDITIONING CONTROLS 2-71
VENTILATION 2-71
HEATING (Optional) 2-71
AIR CONDITIONING (Optional) 2-72
VENTS 2-74
SECTION 3
OPERATING THE MACHINE 3-1
GENERAL INSTRUCTIONS 3-1
BEFORE USING THE MACHINE 3-1
OPERATING THE MACHINE 3-2
RUNNING-IN PERIOD 3-3
PARKING THE MACHINE 3-4
STARTING THE ENGINE 3-5
ASSISTED STARTING (JUMP-STARTING) 3-6
STARTING THE ENGINE AT LOW TEMPERATURES WITH “GRID HEATER” (Optional) 3-8
STARTING THE ENGINE AT TEMPERATURES BELOW -18 °C (Optional) 3-9
CODED ANTI-THEFT SWITCH (Optional) 3-10
STOPPING THE ENGINE 3-11
JOB SITE TRAVEL 3-12
2WD OR 4WD 3-14
STEER SELECTION (4WS) 3-15
DIFFERENTIAL LOCK 3-18
ROAD TRAVEL 3-20
REQUIREMENTS FOR ROAD TRAVEL 3-20
PRECAUTIONS FOR ROAD TRAVEL 3-21
PREPARING THE MACHINE FOR ROAD TRAVEL 3-22
SETTING THE BACKHOE ATTACHMENT IN ROAD TRAVEL POSITION 3-27
LOCKING OR UNLOCKING THE BACKHOE ATTACHMENT 3-29
OPERATING THE MACHINE IN COLD WEATHER 3-31
OPERATING THE MACHINE IN HOT WEATHER 3-32
OPERATING THE MACHINE IN WATER 3-32
LOADER ATTACHMENT 3-33
OPERATING THE LOADER ATTACHMENT 3-33
LOADER ATTACHMENT SAFETY STRUT (B90B – B100B – B110B) 3-39
LOADER ATTACHMENT SAFETY STRUT (B115B) 3-41
LOADER BUCKET – REPLACEMENT (B90B – B100B – B110B) 3-42
LOADER BUCKET – REPLACEMENT (B115B) 3-43
LOADER BUCKET WITH FORKS (Optional) 3-44
BACKHOE ATTACHMENT 3-46
SETTING THE BACKHOE ATTACHMENT IN WORKING POSITION 3-47
BACKHOE ATTACHMENT SIDESHIFT (Sideshift version) 3-49
OPERATING THE BACKHOE ATTACHMENT 3-50
BACKHOE BUCKET – REPLACEMENT 3-55
BALLASTING 3-57
LIFTING LOADS 3-61
SAFETY INSTRUCTIONS 3-61
LIFTING LOADS WITH LOADER ATTACHMENT 3-62
LIFTING LOADS WITH BACKHOE ATTACHMENT 3-64
LIFTING THE MACHINE 3-67
INDEX
MACHINE TRANSPORT (ON A TRAILER) 3-68
TOWING THE MACHINE 3-69
SECTION 4
SUPPLIES AND MAINTENANCE CHART 4-1
SUPPLY SUMMARY TABLE 4-1
FUEL 4-2
HYDRAULIC OIL 4-4
SAFETY INSTRUCTIONS 4-6
WORK HOURS AND INTERVALS 4-8
HOURMETER 4-8
INTERVALS 4-9
MAINTENANCE INTERVAL TABLE 4-10
CHECKS AT START-UP AND BEFORE EACH WORKSHIFT (10 HOURS) 4-13
MACHINE – GENERAL INSPECTION 4-13
LIGHTS 4-13
FUNCTIONALITY OF CONTROLS AND LAMPS 4-13
DRIVE BELT – CHECK 4-14
HYDRAULIC SYSTEM – LINES 4-15
ENGINE OIL – LEVEL 4-16
HYDRAULIC OIL TANK – LEVEL 4-17
FUEL TANK – LEVEL 4-18
BRAKE SYSTEM FLUID – LEVEL 4-19
COOLANT – LEVEL 4-20
WINDSHIELD WASHER FLUID – LEVEL 4-21
WHEELS – NUT TIGHTENING 4-21
WORKING ATTACHMENTS – GREASING 4-22
WEEKLY MAINTENANCE (50 HOURS) 4-24
FUEL FILTER – BLEEDING (B100B – B110B – B115B) 4-24
TYRES – PRESSURE CHECK 4-25
AIR CONDITIONING SYSTEM 4-28
DOOR HINGES – GREASING 4-29
RAILS – GREASING 4-29
FRONT AXLE – GREASING 4-30
STABILIZERS (SIDESHIFT) – CLEARANCE CHECK 4-30
MAINTENANCE EVERY 3 MONTHS (250 HOURS) 4-31
CAB – GENERAL INSPECTION 4-31
SEAT AND SEAT BELT – CHECK 4-33
SEAT SUSPENSION AND RAILS – GREASING 4-33
CAB AIR FILTER – CLEANING 4-33
FUEL TANK – DRAINING 4-34
RADIATOR AND CONDENSER – CLEANING 4-35
COOLING SYSTEM LINES – CHECK 4-36
TRANSMISSION OIL – LEVEL 4-36
FRONT AXLE – OIL LEVEL 4-37
FRONT AXLE BREATHER VALVE – CLEANING 4-38
REAR AXLE – OIL LEVEL 4-39
REAR AXLE BREATHER VALVES – CLEANING 4-40
AXLE ARTICULATIONS – GREASING 4-41
CARDAN SHAFTS – GREASING 4-41
HYDRAULIC OIL TANK BREATHER/FILLER CAP – CLEANING 4-42
BATTERY TERMINALS – CHECK 4-43
HEATER AND EVAPORATOR (AIR CONDITIONING SYSTEM) – CLEANING 4-44
INDEX
TELESCOPIC DIPPER (Optional) – ADJUSTMENT CHECK 4-45
MAINTENANCE EVERY 6 MONTHS (500 HOURS) 4-46
ENGINE OIL – CHANGE 4-46
ENGINE OIL FILTER – REPLACEMENT 4-47
FUEL FILTER – REPLACEMENT (B90B) 4-49
FUEL PREFILTER – REPLACEMENT (B100B – B110B – B115B) 4-51
FUEL FILTER – REPLACEMENT (B100B – B110B – B115B) 4-53
YEARLY MAINTENANCE (1000 HOURS) 4-55
MACHINE – INSPECTION AND CLEANING 4-56
FIRE EXTINGUISHER – CHECK 4-57
ENGINE – VALVE CLEARANCE CHECK (B90B) 4-57
ENGINE – VALVE CLEARANCE CHECK (B100B – B110B – B115B) 4-58
ENGINE – BREATHER FILTER REPLACEMENT 4-58
AIR FILTER – REPLACING MAIN AND SAFETY FILTER ELEMENTS 4-59
POWERSHUTTLE TRANSMISSION – OIL FILTER REPLACEMENT 4-61
POWERSHUTTLE TRANSMISSION – OIL CHANGE 4-62
POWERSHUTTLE TRANSMISSION – SCREEN FILTER CLEANING 4-63
POWERSHIFT TRANSMISSION – OIL FILTER REPLACEMENT 4-64
POWERSHIFT TRANSMISSION – OIL CHANGE 4-65
FRONT AXLE – OIL CHANGE 4-66
REAR AXLE – OIL CHANGE 4-68
BRAKE PEDAL LEVER – GREASING 4-69
HYDRAULIC OIL SYSTEM – OIL FILTER REPLACEMENT 4-70
HYDRAULIC OIL TANK – OIL CHANGE 4-71
HYDRAULIC CYLINDERS – CHECK 4-72
BATTERY – CHARGE AND ELECTROLYTE LEVEL CHECK 4-73
ALTERNATOR – CHECK 4-74
STARTER MOTOR – CHECK 4-74
MAINTENANCE EVERY 2 YEARS (2000 HOURS) 4-75
COOLANT – CHANGE 4-75
BRAKE SYSTEM FLUID – CHANGE 4-77
MAINTENANCE WHEN NECESSARY 4-78
DRIVE BELT – REPLACEMENT 4-79
TURBOCHARGER 4-80
FUEL SYSTEM – BLEEDING (B90B) 4-81
FUEL SYSTEM – BLEEDING (B100B – B110B – B115B) 4-82
AIR PREFILTER – CLEANING 4-84
AIR FILTER ELEMENTS – CLEANING AND REPLACEMENT 4-85
WHEEL/TYRE – REPLACEMENT 4-89
WHEEL TOE-IN – ADJUSTMENT 4-90
PARKING BRAKE – ADJUSTMENT 4-92
HYDRAULIC SYSTEM – PRESSURE RELEASE 4-93
HYDRAULIC FITTINGS AND LINES – REPLACEMENT 4-94
BULBS – REPLACEMENT 4-94
FUSES – REPLACEMENT 4-97
FUSES AND RELAYS – POWERSHUTTLE ROPS (B90B) 4-98
FUSES AND RELAYS – POWERSHUTTLE CAB (B90B) 4-99
FUSES AND RELAYS – POWERSHUTTLE CAB (B100B – B110B) 4-100
FUSES AND RELAYS – POWERSHIFT CAB (B110B) 4-101
FUSES AND RELAYS – POWERSHIFT 4WS CAB (B115B) 4-102
BATTERY – REPLACEMENT 4-103
STABILIZERS (SIDESHIFT) – CLEARANCE CHECK AND ADJUSTMENT 4-104
TELESCOPIC DIPPER (If equipped) – DRAINING 4-104
BUCKET TEETH – REPLACEMENT 4-105
LOADER BUCKET – SELF-LEVELLING ADJUSTMENT 4-106
INDEX
SECTION 5
TROUBLESHOOTING 5-1
ENGINE 5-2
STARTER MOTOR 5-6
ALTERNATOR 5-7
TRANSMISSION 5-8
POWERSHUTTLE TRANSMISSION 5-8
POWERSHIFT TRANSMISSION 5-12
AXLES 5-13
STEERING SYSTEM 5-15
HYDRAULIC SYSTEM 5-16
LOADER ATTACHMENT 5-17
BACKHOE ATTACHMENT 5-18
SWING 5-19
HYDRAULIC PUMP 5-20
ELECTRICAL SYSTEM 5-21
CAB 5-22
AIR CONDITIONING 5-22
SECTION 6
STORAGE 6-1
MACHINE STORAGE 6-1
TAKING THE MACHINE BACK TO SERVICE 6-2
SECTION 7
ACCESSORIES 7-1
MECHANICAL LOADER BUCKET QUICK COUPLER 7-1
MECHANICAL BACKHOE BUCKET QUICK COUPLER 7-2
BACKHOE ATTACHMENT AUXILIARY HYDRAULIC TOOLS 7-3
MANUAL AUXILIARY HYDRAULIC TOOLS 7-4
BACKHOE ATTACHMENT SAFETY VALVES 7-5
STABILIZER SAFETY VALVES 7-5
REVERSIBLE STABILIZER PADS (CENTER PIVOT) 7-5
SECTION 8
DATA AND TECHNICAL SPECIFICATIONS 8-1
DIESEL ENGINE 8-1
72 kW – 97 HP ENGINE (B90B) 8-1
72 kW – 97 HP ENGINE (B100B) 8-2
82 kW – 110 HP ENGINE (B110B – B115B) 8-3
TRANSMISSION 8-4
2WD/2WS TRANSMISSION – POWERSHUTTLE (B90B) 8-4
4WD/2WS TRANSMISSION – POWERSHUTTLE (B90B – B100B – B110B) 8-4
4WD/2WS TRANSMISSION – POWERSHIFT (B110B) 8-4
4WD/4WS TRANSMISSION – POWERSHIFT (B115B) 8-5
AXLES 8-6
FRONT AXLES 8-6
REAR AXLES 8-6
BRAKES 8-7
BRAKES (B90B – B100B – B110B) 8-7
INDEX
BRAKES (B115B) 8-7
STEERING 8-7
POWER STEERING 8-7
HYDRAULIC SYSTEM 8-8
HYDRAULIC PUMP 8-8
FRONT COUNTERWEIGHT 8-8
COUNTERWEIGHT – 2WS 8-8
COUNTERWEIGHT – 4WS 8-8
NOISE AND VIBRATION LEVELS 8-9
NOISE LEVEL 8-9
VIBRATION LEVEL INSIDE THE CAB 8-9
BUCKETS 8-9
LOADER BUCKETS 8-9
BACKHOE BUCKETS 8-9
TYRES 8-10
TYRE TYPES 8-10
NUT TORQUES 8-10
INFLATING PRESSURE AND ALLOWED CARRYING CAPACITY TABLE 8-11
ROAD TRAVEL SPEED 8-12
DIMENSIONS AND PERFORMANCE 8-13
DIMENSIONS – 2WS SIDESHIFT 8-13
DIMENSIONS – 2WS CENTER PIVOT 8-14
DIMENSIONS – 4WS SIDESHIFT 8-15
DIMENSIONS – 4WS CENTER PIVOT 8-16
LOADER ATTACHMENT PERFORMANCE 8-17
PERFORMANCE OF LOADER ATTACHMENT WITH FORKS 8-25
BACKHOE ATTACHMENT PERFORMANCE 8-29
BACKHOE ATTACHMENT LIFTING CAPACITY 8-49
LIFTING CAPACITY – MODELS B90B, B90BLR 8-49
LIFTING CAPACITY – MODELS B100B, B100BLR 8-50
LIFTING CAPACITY – MODELS B110B (SIDESHIFT) 8-51
LIFTING CAPACITY – MODELS B110B (CENTER PIVOT) 8-52
LIFTING CAPACITY – MODELS B115B (SIDESHIFT) 8-53
LIFTING CAPACITY – MODELS B115B (CENTER PIVOT) 8-54
MAXIMUM LIFTING

Contact us: [email protected]

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V