New Holland B90B B95B B95BLR B95BTC B110B B115B TIER 3 Backhoe Loader Operator’s Manual 84142660 – PDF DOWNLOAD

Description

New Holland B90B B95B B95BLR B95BTC B110B B115B TIER 3 Backhoe Loader Operator’s Manual 84142660 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland B90B B95B B95BLR B95BTC B110B B115B TIER 3 Backhoe Loader Operator’s Manual 84142660 – PDF DOWNLOAD

FOREWORD:
The current Operator’s Manual is the user’s guide for correct run-in, use and maintenance of the machine. Carefully read this Operator’s Manual and store it in the cab for quick location and reference. Instructions concerning safety, operation and maintenance have been developed to permit safe service and operation of this machine.

• In the event of queries or suggestions relevant to your machine do not hesitate to address to your Dealer. Dealers have qualified and trained personnel at disposal, as well as original spare parts, means and tools suitable to carry out all necessary maintenance operations.
• Do not use this machine for any applications or purposes other than those described in this manual. If you use this machine for duties involving the use of attachments, accessories, or special tools, consult your Dealer to make sure that the adaptations or modifications carried out are in conformity with the machine’s technical specifications and with current regulations on safety.
• Any modifications or adaptations which are not approved by the manufacturer may invalidate the machine’s original conformity with safety requirements.

Before entrusting this machine to an operator, make sure that:
– the operator has received necessary training on how to operate the machine correctly and safely in one of our Training Centres or from an approved organization;
– the operator has read and fully understood the instructions given in this Manual.

• Always keep this manual in the storage compartment provided for it. Make sure that it is always
  complete and in good condition.
• Consult your Dealer to obtain extra manuals or manuals in other languages.
• Your Dealer is at your disposal for any further information.

TABLE OF CONTENTS:

New Holland B90B B95B B95BLR B95BTC B110B B115B TIER 3 Backhoe Loader Operator’s Manual 84142660 – PDF DOWNLOAD

SECTION 1
INTRODUCTION, SAFETY, PLATES AND DECALS 1-1
FOREWORD 1-1
SAFETY INSTRUCTIONS 1-2
GENERAL SAFETY INSTRUCTIONS 1-2
BEFORE USING THE MACHINE 1-3
OPERATING THE MACHINE 1-6
PARKING THE MACHINE 1-10
MAINTENANCE AND ADJUSTMENTS 1-11
PREVENTION OF FIRE OR EXPLOSIONS 1-13
PREVENTION OF BURNS 1-14
PREVENTION OF RISKS ASSOCIATED WITH VIBRATIONS 1-15
PRECAUTIONS FOR WASTE DISPOSAL 1-16
COMPONENT IDENTIFICATION PLATES 1-17
MAIN COMPONENTS 1-21
DECALS 1-23
POSITION OF DECALS 1-24
HAND SIGNALS 1-33
SECTION 2
CONTROLS AND INSTRUMENTS 2-1
FRONT INSTRUMENT CLUSTER PANEL 2-1
SIDE INSTRUMENT CLUSTER PANEL (B90B) 2-3
SIDE INSTRUMENT PANEL (B95B – B110B – B115B) 2-5
SIDE INSTRUMENT CLUSTER (B90B) 2-10
SIDE INSTRUMENT (B95B – B110B – B115B) 2-12
OPERATOR’S COMPARTMENT CONTROLS 2-14
STARTER SWITCH KEY 2-14
STEERING WHEEL 2-14
DIRECTION INDICATOR SWITCH (B90B AND B95B ROPS) 2-15
LEVER FOR DIRECTION INDICATORS, MAIN BEAMS, FRONT WINDSHIELD WIPER AND WASHER
(CAB) 2-16
TRANSMISSION CONTROLS 2-17
HORN BUTTON 2-34
ENGINE ACCELERATOR CONTROLS 2-35
BRAKES 2-36
WHEEL STEER MODE SWITCH (4WS) 2-37
CAB 2-38
OPERATOR’S SEAT 2-46
SEAT (VINYL AND DE LUXE MODEL) 2-47
SEAT (DE LUXE MODEL, PNEUMATIC VERSION) 2-48
LOADER ATTACHMENT CONTROLS 2-49
LOADER ATTACHMENT OPERATION 2-49
4×1 LOADER BUCKET CONTROL (If fitted) 2-52
TRANSMISSION DISCONNECT BUTTON 2-53
BACKHOE ATTACHMENT CONTROLS 2-54
BACKHOE ATTACHMENT MECHANICAL CONTROLS VERSION 2-55
BACKHOE ATTACHMENT HYDRAULIC CONTROLS 2-65
HEATING AND AIR CONDITIONING CONTROLS 2-71
INDEX
VENTILATION 2-71
HEATING (Optional) 2-71
AIR CONDITIONING (Optional) 2-72
VENTS 2-74
SECTION 3
OPERATING THE MACHINE 3-1
GENERAL INSTRUCTIONS 3-1
BEFORE USING THE MACHINE 3-1
OPERATING THE MACHINE 3-2
RUNNING-IN PERIOD 3-3
PARKING THE MACHINE 3-4
STARTING THE ENGINE 3-5
ASSISTED STARTING (JUMP-STARTING) 3-6
STARTING THE ENGINE AT LOW TEMPERATURES WITH “GRID HEATER” (Optional) 3-8
STARTING THE ENGINE AT TEMPERATURES BELOW -18 °C (-0 4 °F) (Optional) 3-9
CODED ANTI-THEFT SWITCH (Optional) 3-10
STOPPING THE ENGINE 3-11
JOB SITE TRAVEL 3-12
2WD OR 4WD 3-14
STEER SELECTION (4WS) 3-15
DIFFERENTIAL LOCK 3-18
ROAD TRAVEL 3-20
REQUIREMENTS FOR ROAD TRAVEL 3-20
PRECAUTIONS FOR ROAD TRAVEL 3-21
PREPARING THE MACHINE FOR ROAD TRAVEL 3-22
SETTING THE BACKHOE ATTACHMENT IN ROAD TRAVEL POSITION 3-26
LOCKING OR UNLOCKING THE BACKHOE ATTACHMENT 3-28
OPERATING THE MACHINE IN COLD WEATHER 3-30
OPERATING THE MACHINE IN HOT WEATHER 3-31
OPERATING THE MACHINE IN WATER 3-31
LOADER ATTACHMENT 3-32
OPERATING THE LOADER ATTACHMENT 3-32
LOADER ATTACHMENT SAFETY STRUT (B90B – B95B – B110B) 3-37
LOADER ATTACHMENT SAFETY STRUT (B95BTC – B115B) 3-39
LOADER BUCKET – REPLACEMENT (B90B – B95B – B110B) 3-40
LOADER BUCKET – REPLACEMENT (B95BTC – B115B) 3-41
LOADER BUCKET WITH QUICK COUPLER (B95BTC) 3-42
LOADER BUCKET WITH FORKS (Optional) 3-44
BACKHOE ATTACHMENT 3-46
SETTING THE BACKHOE ATTACHMENT IN WORKING POSITION 3-47
OPERATING THE BACKHOE ATTACHMENT 3-49
BACKHOE BUCKET – REPLACEMENT 3-54
BALLASTING 3-56
LIFTING LOADS 3-60
LIFTING LOADS WITH LOADER ATTACHMENT 3-60
LIFTING THE MACHINE 3-62
MACHINE TRANSPORT (ON A TRAILER) 3-63
TOWING THE MACHINE 3-64
INDEX
SECTION 4
SUPPLIES AND MAINTENANCE CHART 4-1
SUPPLY SUMMARY TABLE 4-1
FUEL 4-2
HYDRAULIC OIL 4-4
SAFETY INSTRUCTIONS 4-6
WORK HOURS AND INTERVALS 4-8
HOURMETER 4-8
INTERVALS 4-9
MAINTENANCE INTERVAL TABLE 4-10
CHECKS AT START-UP AND BEFORE EACH WORKSHIFT (10 HOURS) 4-13
MACHINE – GENERAL INSPECTION 4-13
LIGHTS 4-13
FUNCTIONALITY OF CONTROLS AND LAMPS 4-13
DRIVE BELT – CHECK 4-14
HYDRAULIC SYSTEM – LINES 4-15
ENGINE OIL – LEVEL 4-16
HYDRAULIC OIL TANK – LEVEL 4-17
FUEL TANK – LEVEL 4-18
BRAKE SYSTEM FLUID – LEVEL 4-19
COOLANT – LEVEL 4-20
WINDSHIELD WASHER FLUID – LEVEL 4-21
WHEELS – NUT TIGHTENING 4-21
WORKING ATTACHMENTS – GREASING 4-22
WEEKLY MAINTENANCE (50 HOURS) 4-23
FUEL FILTER – BLEEDING (B95B – B110B – B115B) 4-23
TYRES – PRESSURE CHECK 4-24
INFLATING PRESSURE AND ALLOWED CARRYING CAPACITY TABLE 4-25
AIR CONDITIONING SYSTEM 4-28
DOOR HINGES – GREASING 4-29
TELESCOPIC DIPPER RAILS – GREASING 4-29
FRONT AXLE – GREASING 4-29
MAINTENANCE EVERY 3 MONTHS (250 HOURS) 4-30
CAB – GENERAL INSPECTION 4-30
SEAT AND SEAT BELT – CHECK 4-32
SEAT SUSPENSION AND RAILS – GREASING 4-32
CAB AIR FILTER – CLEANING 4-32
FUEL TANK – DRAINING 4-33
RADIATOR AND CONDENSER – CLEANING 4-34
COOLING SYSTEM LINES – CHECK 4-35
TRANSMISSION OIL – LEVEL 4-35
FRONT AXLE – OIL LEVEL 4-36
FRONT AXLE BREATHER VALVE – CLEANING 4-37
REAR AXLE – OIL LEVEL 4-38
REAR AXLE BREATHER VALVE – CLEANING 4-39
AXLE ARTICULATIONS – GREASING 4-40
CARDAN SHAFTS – GREASING 4-40
HYDRAULIC OIL TANK BREATHER/FILLER CAP – CLEANING 4-41
BATTERY TERMINALS – CHECK 4-42
HEATER AND EVAPORATOR (AIR CONDITIONING SYSTEM) – CLEANING 4-43
TELESCOPIC DIPPER (Optional) – ADJUSTMENT CHECK 4-44
MAINTENANCE EVERY 6 MONTHS (500 HOURS) 4-45
ENGINE OIL – CHANGE 4-45
ENGINE OIL FILTER – REPLACEMENT 4-46
INDEX
FUEL FILTER – REPLACEMENT (B90B) 4-48
FUEL PREFILTER – REPLACEMENT (B95B – B110B – B115B) 4-50
FUEL FILTER – REPLACEMENT (B95B – B110B – B115B) 4-52
YEARLY MAINTENANCE (1000 HOURS) 4-54
MACHINE – INSPECTION AND CLEANING 4-55
ENGINE – VALVE CLEARANCE CHECK (B90B) 4-56
ENGINE – VALVE CLEARANCE CHECK (B95B – B110B – B115B) 4-57
ENGINE – BREATHER FILTER REPLACEMENT 4-57
AIR FILTER – REPLACING MAIN AND SAFETY FILTER ELEMENTS 4-58
POWERSHUTTLE TRANSMISSION – OIL FILTER REPLACEMENT 4-60
POWERSHUTTLE TRANSMISSION – OIL CHANGE 4-61
POWERSHUTTLE TRANSMISSION – SCREEN FILTER CLEANING 4-62
POWERSHIFT TRANSMISSION – OIL FILTER REPLACEMENT 4-63
POWERSHIFT TRANSMISSION – OIL CHANGE 4-64
FRONT AXLE – OIL CHANGE 4-65
REAR AXLE – OIL CHANGE 4-67
BRAKE PEDAL LEVER – GREASING 4-68
HYDRAULIC OIL SYSTEM – OIL FILTER REPLACEMENT 4-69
HYDRAULIC OIL TANK – OIL CHANGE 4-70
HYDRAULIC CYLINDERS – CHECK 4-71
BATTERY – CHARGE AND ELECTROLYTE LEVEL CHECK 4-72
ALTERNATOR – CHECK 4-73
STARTER MOTOR – CHECK 4-73
MAINTENANCE EVERY 2 YEARS (2000 HOURS) 4-74
COOLANT – CHANGE 4-74
BRAKE SYSTEM FLUID – CHANGE 4-76
MAINTENANCE WHEN NECESSARY 4-77
DRIVE BELT – REPLACEMENT 4-78
TURBOCHARGER 4-79
FUEL SYSTEM – BLEEDING (B90B) 4-80
FUEL SYSTEM – BLEEDING (B95B – B110B – B115B) 4-81
AIR PREFILTER – CLEANING 4-83
AIR FILTER ELEMENTS – CLEANING AND REPLACEMENT 4-84
WHEEL/TYRE – REPLACEMENT 4-88
WHEEL TOE-IN – ADJUSTMENT 4-89
PARKING BRAKE – ADJUSTMENT 4-91
HYDRAULIC SYSTEM – PRESSURE RELEASE 4-92
HYDRAULIC FITTINGS AND LINES – REPLACEMENT 4-93
LAMPS – REPLACEMENT 4-93
FUSES – REPLACEMENT 4-95
FUSES AND RELAYS – POWERSHUTTLE ROPS (B90B) 4-96
FUSES AND RELAYS – POWERSHUTTLE CAB (B90B) 4-97
FUSES AND RELAYS – POWERSHUTTLE ROPS (B95B – B110B) 4-98
FUSES AND RELAYS – POWERSHUTTLE CAB (B95B – B110B) 4-99
FUSES AND RELAYS – POWERSHIFT CAB (B110B) 4-100
FUSES AND RELAYS – POWERSHIFT 4WS CAB (B115B) 4-101
BATTERY – REPLACEMENT 4-102
TELESCOPIC DIPPER (If equipped) – DRAINING 4-103
BUCKET TEETH – REPLACEMENT 4-104
LOADER BUCKET – SELF-LEVELLING ADJUSTMENT 4-105
INDEX
SECTION 5
TROUBLESHOOTING 5-1
ENGINE 5-2
STARTER MOTOR 5-6
ALTERNATOR 5-7
TRANSMISSION 5-8
POWERSHUTTLE TRANSMISSION 5-8
POWERSHIFT TRANSMISSION 5-12
AXLES 5-13
STEERING SYSTEM 5-15
HYDRAULIC SYSTEM 5-16
LOADER ATTACHMENT 5-17
BACKHOE ATTACHMENT 5-18
SWING 5-19
HYDRAULIC PUMP 5-20
ELECTRICAL SYSTEM 5-21
CAB 5-22
AIR CONDITIONING 5-22
SECTION 6
STORAGE 6-1
MACHINE STORAGE 6-1
TAKING THE MACHINE BACK TO SERVICE 6-2
SECTION 7
ACCESSORIES 7-1
MECHANICAL LOADER BUCKET QUICK COUPLER 7-1
MECHANICAL BACKHOE BUCKET QUICK COUPLER 7-2
BACKHOE ATTACHMENT AUXILIARY HYDRAULIC TOOLS 7-3
MANUAL AUXILIARY HYDRAULIC TOOLS 7-4
SECTION 8
DATA AND TECHNICAL SPECIFICATIONS 8-1
DIESEL ENGINE 8-1
72 kW – 97 HP ENGINE (B90B) 8-1
72 kW – 97 HP ENGINE (B95B) 8-2
82 kW – 110 HP ENGINE (B110B – B115B) 8-3
TRANSMISSION 8-4
2WD/2WS TRANSMISSION – POWERSHUTTLE (B90B) 8-4
4WD/2WS TRANSMISSION – POWERSHUTTLE (B90B – B95B – B110B) 8-4
4WD/2WS TRANSMISSION – POWERSHIFT (B110B) 8-4
4WD/4WS TRANSMISSION – POWERSHIFT (B115B) 8-5
AXLES 8-6
FRONT AXLES 8-6
REAR AXLES 8-6
INDEX
BRAKES 8-7
BRAKES (B90B – B95B – B110B) 8-7
BRAKES (B115B) 8-7
STEERING 8-7
POWER STEERING 8-7
HYDRAULIC SYSTEM 8-8
HYDRAULIC PUMP 8-8
FRONT COUNTERWEIGHT 8-8
COUNTERWEIGHT – 2WS 8-8
COUNTERWEIGHT – 4WS 8-8
NOISE AND VIBRATION LEVELS 8-8
NOISE LEVEL 8-8
VIBRATION LEVEL INSIDE THE CAB 8-8
BUCKETS 8-9
LOADER BUCKETS 8-9
BACKHOE BUCKETS 8-9
TYRES 8-10
TYRE TYPES 8-10
NUT TORQUES 8-10
INFLATING PRESSURE AND ALLOWED CARRYING CAPACITY TABLE 8-11
DIMENSIONS AND PERFORMANCE 8-14
DIMENSIONS – 2WS 8-14
DIMENSIONS – 4WS 8-16
LOADER ATTACHMENT PERFORMANCE 8-17
PERFORMANCE OF LOADER ATTACHMENT WITH FORKS 8-29
BACKHOE ATTACHMENT PERFORMANCE 8-33
BACKHOE ATTACHMENT LIFTING CAPACITY 8-54
LIFTING CAPACITY – MODELS B90B, B95B AND B95BLR 8-54
LIFTING CAPACITY – MODELS B95TC 8-55
LIFTING CAPACITY – MODELS B110B 8-56
LIFTING CAPACITY – MODELS B115B 8-57
SECTION 9
ALPHABETICAL INDEX 9-1

Customer Support: [email protected]

https://vimeo.com/733211947

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V