New holland B95BTC TIER 3 PARTS CATALOG Manual 87659790 NA – PDF DOWNLOAD

Description

New holland B95BTC TIER 3 PARTS CATALOG Manual 87659790 NA – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

 DESCRIPTION:

New holland B95BTC TIER 3 PARTS CATALOG Manual 87659790 NA – PDF DOWNLOAD

GENERAL INFORMATION

PROPRIETARY NOTICE

The contents of this manual are proprietary data of this company. Reproduction or use of any part for other than the operation and maintenance of our equipment is permissible only if expressly authorized in writing. Additional copies may be obtained from your dealer. Address requests for copies to your Dealer and refer to the publication part number appearing on the bottom of the rear catalog cover or on the title page.

COMPANY POLICY

Company policy, which is one of continuous improvement, reserves the right to change prices and to make changes in design and specification at any time without notice and without obligation to modify units previously built. All data given in this book is subject to production variations. Dimensions and weights are approximate only and the illustrations do not necessarily show machines in standard condit ion. For exact information about any particular machine please consult your dealer.

PARTS AND ACCESSORIES

Genuine par ts and accessories have been specifically designed for these machines. We would like to point out that “non-genuine” parts and accessories have NOT been examined and released by the Company. The installation and or use of such products could have negative effects upon the design characteristics of your machine and thereby affect its safety. The company is not liable for any damage caused by the use of “non-genuine” parts and accessories.

IMPROVEMENTS

We are continually striving to improve our products. We reserve the right to make improvements or changes when it becomes practical and possible to do so, without incurring any obligation to make changes or additions to the equipment sold previously.

MODEL CODES

The range of machines listed may not be available in all countries or markets therefore, for the latest information consult your local dealer.

TABLE OF CONTENTS:

TABLE OF CONTENTS:

New holland B95BTC TIER 3 PARTS CATALOG Manual 87659790 NA – PDF DOWNLOAD

MAIN SECTIONS
MPARTS 00 MAINTENANCE PARTS
SEC. 01 03 ENGINE
SEC. 01 04 ENGINE
SEC. 02 FUEL TANK – MUFFLER – RADIATOR -AIR CLEANER – CHASSIS
SEC. 03 01 TRANSMISSION
SEC. 05 REARAXLE
SEC. 06 ELECTRICAL
SEC. 07 SLIDES VALVES
SEC. 08 BODY & HOOD
SEC. 09 01 LOADER
SEC. 09 03 ВАСКНОЕ
SEC. 11 WHEELS
SEC. 18 VARIATION
0.0040/01 01 OPTIONAL EQUIPMENT – NA
0.0040/01 02 OPTIONAL EQUIPMENT – NA
0.0040/01 03 OPTIONAL EQUIPMENT – NA
0.02.1/01 ENGINE
0.04.0/01 CRANKCASE
0.04.2 ENGINE OIL SUMP
0.04.3/01 01 CRANKCASE COVERS
0.04.3/01 02 CRANKCASE COVERS
0.04.3/01 03 CRANKCASE COVERS
0.06.0/01 CYLINDER HEAD
0.06.3/01 01 CYLINDER HEAD COVERS
0.06.3/01 02 CYLINDER HEAD COVERS
0.06.6/01 ROCKER SHAFT
0.07.1/01 MANIFOLD – INTAKE
0.07.7/01 EXHAUST MANIFOLD
0.08.0 CRANKSHAFT
0.08.1/01 CONNECTING ROD
0.08.2/01 PISTON – ENGINE
0.08.3 FL YWHEEL – ENGINE
0.08.4 PULLEY – CRANKSHAFТ
0.10.5 01 DYNAMIC BALANCER, GEARS & SHAFТS
0.10.5 02 DYNAMIC BALANCER, GEARS & SHAFТS
0.12.0/01 CAMSHAFТ – TIMING CONTROL
0.14.0/01 01 INJECTION PUMP
0.14.0/01 02 INJECTION EQUIPMENT – INJECTOR
О.14.О/01А INJECTION PUMP – COMPONENTS
0.14.9/01 INJECTION EQUIPMENT – PIPING
0.17.0 ELECTRONIC INJECTION
0.17.3 MOTOR ELECTRIC INSTALLATION
0.20.0/01 FUEL FILTER
0.20.3/01 PIPING – FUEL
0.20.4/01 INJECTION EQUIPMENT – PIPING
0.24.0/01 TURBOCHARGER
0.27.0/01 ENGINE OIL DIPSTICK
о.за.о OIL PUMP – ENGINE
0.30.2 OIL FIL TERS – ENGINE
0.30.5/01 PIPING – ENGINE OIL
TABLE OF CONTENTS
НЕАТ EXCHANGER – ENGINE
WATER PUMP
COOLING SYSTEM – ENGINE
THERMOSTAT – ENGINE COOLING SYSTEM
WATER PUMP-CONTROL
FAN DRIVE
ACCESSORY ENGINE
ALTERNATOR
HOOKS- ENGINE
FUEL TANK & RELATED PARTS
FUEL PIPE
FIL TER FUEL – BREAKDOWN
MUFFLER & EXTENSIONS
EXHAUST TUBE
AIR CLEANER & HOSES
FRAME (CENTER PIVOT)
TRANSMISSION
TORQUE CONVERTER COMPONENTS AND GEARSHIFТ GEAR DRIVES (4WD
POWER-SHUПLE)
GEARSHIFТ OUTER COMPONENTS (4WD POWER-SHUПLE)
GEARSHIFТ HYDRAULIC COMPONENTS (4WD POWER-SHUПLE)
PARКING BRAKE (4WD POWER-SHUПLE)
TRANSMISSIONGEARING SPEED GEAR (4WD POWER-SHUПLE)
FRONT TRANSMISSION SHAFT (4WD POWER-SHUПLE)
GEARSHIFT GEAR DRIVES (4WD POWER-SHUПLE)
REAR DRIVE SHAFT GEARS (4WD POWER-SHUПLE)
OIL DIPSTICK / ТОР UP (POWER-SHUПLE)
TRANSMISSION ESTERNALSHIFTING CONTROLS (POWER-SHUПLE)
FRONT AND REAR TRANSMISSION SHAFT (POWER-SHUПLE)
TRANSMISSION OIL COOLING PIPES (POWER-SHUПLE)
POWER STEERING HYDRAULIC SYSTEM
REAR AXLE (POWER-SHUПLE) (CENTER PIVOT) – NA
DIFFERENTIAL LOCK ASSY AND ENGAGEMENT (POWER SHUПLE) (CENTER
PIVOT): NA
REAR AXLE BEVEL GEAR SET ASSY (POWER SHUПLE) (CENTER PIVOT): NA
DIFFERENTIAL CONTROL (POWER-SHUПLE)
DIFFERENTIAL CONTROL (POWER-SHUПLE) (CENTER PIVOT) – NA
FRAME REAR HARNESS AND GROUND CABLE (POWER SHUПLE): NA
ВАТТЕRУ LOCK-OUT SWITCH & GROUND WIRE (POWER SHUПLE)- NA
ENGINE HARNESS (POWER SHUПLE) – NA
HYDRAULIC OIL RESERVOIR
HYDRAULIC PUMP (35+35-154UMM)
HYDRAULIC SYSTEM PIPES: PUMP OIL DELIVERY
HYDRAULIC SYSTEM PIPES: CONTROL VALVE DELIVERY
HYDRAULIC SYSTEM PIPES: PRESSURE INTAKE
HYDRAULIC SYSTEM PIPES: CONTROL VALVE DISCHARGE
HYDRAULIC SYSTEM PIPES: RETURN ТО TANK
HYDRAULIC SYSTEM PIPES: OIL FIL TER AND СНЕСК VALVE
HYDRAULIC SYSTEM PIPES: BUCKET CYLINDER
HYDRAULIC SYSTEM PIPES: ВООМ CYLINDER
HYDRAULIC SYSTEM PIPES 4WS (CENTER PIVOT): NA
1.82.6 13 HYDRAULIC SYSTEM PIPES: SWING CYLINDER
1.82.6 14 HYDRAULIC SYSTEM PIPES: ВАСКНОЕ АТТАСНМЕNТ CYLINDER
1.82.6 15 HYDRAULIC SYSTEM PIPES: ВАСКНОЕ АТТАСНМЕNТ ВООМ CYLINDER
1.82.6 16 ROTATION PLATE HOSE CLAMPS (CENTER PIVOT)
1.82.6/01 01 FRONT HYDRAULIC PUMP INTAKE & OUTLET HOSES (CENTER PIVOT) – NA
1.82.6/01 02 REAR HYDRAULIC PUMP STABILIZER, LOADER & ВАСКНОЕ VALVE HOSES (СР)-
NA
1.82.6/01 03 HYDRAULIC SYSTEM PIPES (CENTER PIVOT): NA: PRESSURE INTAKE
1.82.6/01 04 RETURN MANIFOLD HOSES- NA
1.82.6/01 05 FIL TER ASSEMBL У & HOSE ТО RETURN MANIFOLD (CENTER PIVOT) – NA
1.82.6/01 06 HYDRAULIC SYSTEM PIPES (CENTER PIVOT): NA: RETURN ТО TANK
1.82.6/01 09 ВАСКНОЕ SWING CYLINDER HOSES (CENTER PIVOT) – NA
1.82.6/01 10 ВАСКНОЕ CONTROL VALVE HOSES (CENTER PIVOT)- NA
1.82.6/01 11 ROTATION PLATE HOSE CLAMPS (CENTER PIVOT)- NA
1.82.6/01 12 ВАСКНОЕ CONTROL VALVE (CENTER PIVOT)- NA
1.82.6/01 13 DIPPER VALVE SECTION (CENTER PIVOT)- NA
1.82.6/01 14 BUCKET, SWING, & ВООМ VALVE SECTION (CENTER PIVOT)- NA
1.82.6/01А 01 HYDRAULIC SYSTEM PIPING (CENTER PIVOT) – NA
1.82.6/01А 02 HYDRAULIC SYSTEM PIPING (CENTER PIVOT) – NA
1.83.0 01 GRID AND ACCESSORIES
1.83.0 02 GUARD AND ACCESSORIES
1.83.0 03 DOOR LOCKКIT
1.83.0 04 LOCK PLA ТЕ ASSY
1.83.0 05 TIPPING GUARD HINGE КIТ
1.83.0 06 TIPPING GUARD ASSY COMPONENTS
1.87.2 САВ SCREEN
1.87.8 САВ FASTENERS
1.88.01 01 REAR АТТАСНМЕNТ TRANSPORT LOCK TIE ROD (CENTER PIVOT): NA
1.88.01 02 REAR АТТАСНМЕNТ TRANSPORT LOCK CABLE (CENTER PIVOT): NA
1.88.08 01 SWING POST ASSEMBLY, BUSHINGS & PINS
1.88.08 02 SWING POST PINS & TRANSPORT LOCK НООК
1.88.11/ В ARMS AND JOINTS
1.88.11/01А LOADER CYLINDER
1.88.11/02А LOADER BUCKET CONTROL CYLINDER
1.88.11/03В LIFТ CYLINDER AND BUCKET PIPES
1.88.11/06А STABILIZER CYLINDERS (CENTER PIVOT)
1.88.11/07А PIPES FOR STABILIZER CYLINDERS (CENTER PIVOT PILOT)
1.88.11/07С PIPES FOR STABILIZER CYLINDERS (CENTER PIVOT MECHANIC) – NA
1.88.11/08А RETURN ТО DIG SENSOR
1.88.11/09А CYLINDERS AND ROTATION PLATE (CENTER PIVOT)
1.88.12/03 FRONT CONTROL VALVE SUPPORT AND TRANSMISSIONS (CENTER PIVOT – SIDE
SHIFТ)
1.88.12/03А FRONT CONTROL VALVE SUPPORT AND TRANSMISSIONS (CENTER PIVOT)- NA
1.89.9/01 DISTRIBUTOR VALVE SUPPORT HUSCO (CENTER PIVOT)- NA
1.91.1 САВ : CEILING LIGHT
1.91.1/01 SAFETY FRAME: INSTRUMENTS AND GAUGES (ROPS) – NA
1.91.3 BACK-UP ALARM
1.91.4 01 САВ ROOF HARNESS (САВ, POWER SHUПLE)
1.91.4 02 FUSE ВОХ CONTROL UNIT (САВ, POWER SHUПLE)
1.91.4 03 IGNITON SWITCH, POWER POINT, FUSE PANEL & SIDE CONSOLE HARNESS (САВ
1.91.4 04 FRONT HARNESS AND CONTROL UNIT (САВ, POWER SHUПLE}
1.91.4 05 FRONT DASH (САВ POWER SHUПLE}
1.91.4 06 САВ ELECTRIC SYSTEM COMPONENTS (САВ, POWER SHUПLE}
1.91.4/02 01 САВ ROOF HARNESS (ROPS POWER SHUПLE}
1.91.4/02 02 FUSE ВОХ CONTROL UNIT (ROPS POWER SHUПLE}
1.91.4/02 03 IGNITON SWITCH, POWER POINT, FUSE PANEL & SIDE CONSOLE HARNESS
(ROPS РТ}
1.91.4/02 04 FRONT HARNESS AND CONTROL UNIT (ROPS POWER SHUПLE}
1.91.4/02 05 RH CONSOLE WITH INSTRUMENTS (ROPS POWER SHUПLE} – NA
1.91.4/02 06 САВ ELECTRIC SYSTEM COMPONENTS (ROPS POWER SHUПLE)
1.91.5 01 FRONT AND REAR WINDSCREEN WIPERS
1.91.5 02 WINDSCREEN WIPERS RESERVOIR & NOZZLES
1.91.6 RADIO ANTENNA & SPEAKER COVER
1.91.7/01 LAMPS & LIGHTS – ROPS – NA
1.91.7/02 LAMPS & LIGHTS – САВ – NA
1.92.2 САВ: FRAME-DOOR
1.92.3 FRONT GLASSES AND SEALS
1.92.4 01 DOOR LATERAL GLASS FASTENERS
1.92.4 02 САВ SIDE GLASS FASTENERS
1.92.4 03 SIDE GLASSES
1.92.5 FENDERS,REAR
1.92.6 01 DOOR COMPONENTS
1.92.6 02 DOOR COMPLETION COMPONENTS: LOWER SIDE
1.92.6 03 DOOR CLOSURE HINGE COMPONENTS
1.92.8 FLAME TRAP SEAL, ROPS (POWER SHUПLE}
1.92.9 01 REAR GLASSES AND COMPONENTS
1.92.9 02 REAR GLASS CLOSURE HINGE
1.92.9 03 HINGES AND REAR GLASS CLOSURE
1.93.0 01 САВ: SOFT TRIM (POWER SHUПLE, POWER SHIFT}
1.93.0 02 САВ: SOFT TRIM (POWER SHUПLE, POWER SHIFT}
1.93.0 04 САВ / REAR CONSOLE AND FLOOR COVERING (POWER SHUПLE: POWER SHIFT}
1.93.0/01 01 САВ: SOFT TRIM (POWER SHUПLE, POWER SHIFT}
1.93.0/01 02 САВ / FLOOR COVERING AND COMPONENTS (POWER SHUПLE: POWER SHIFТ)
1.93.0/02 01 RIGHT SIDE COVERING, REAR CONSOLE ROPS (CENTER PIVOT): NA
1.93.0/03 MACHINES SOFТ TRIMS (ROPS)- NA
1.93.4 САВ: REAR MIRROR- SUN SCREEN
1.93.5 01 САВ / FRONT DASHBOARD
1.93.5 02 САВ / DASHBOARD FASTENERS AND GASKETS
1.93.5/01 01 FRONT CONSOLE – ROPS (POWER SHUПLE) – NA
1.93.5/01 02 RH SIDE CONSOLE SEAL & CLIPS – ROPS (POWER SHUПLE) – NA
1.93.7 INNER REAR VIEW MIRROR (POWER SHUПLE) ROPS
1.94.0/01 САВ / ROPS: ROOF AND INNER COVERING: NA
1.94.2 HEATER WATER HOSES
1.95.0 01 САВ / ROPS : BRAKE PEDAL
1.95.0 02 САВ / ROPS / BRAKE PUMP
1.95.0 03 САВ / ROPS / BRAKE SYSTEM PIPES
1.95.0/ А САВ / ROPS / BRAKE PUMP CYLINDER
1.95.1 САВ / ROPS / PARКING BRAKE LEVER AND CONTROL CABLE
1.95.2 TRANSPORT LOCK CONTROL – NA
1.95.3 HAND/PEDAL ELECTRONIC ACCELERATOR CONTROL
1.95.5 01 STEERING COLUMN AND COVERING: NA
1.95.5 02 STEERING SYSTEM SLEEVES: NA
1.95.5/ А 01 POWER STEERING: NA
1.96.0 FOWARD/REVERSE & MUL TI-PURPOSE LEVER
1.96.2 01 STABILIZER CONTROL (SIDE SHIFT – EU)- (CENTER PIVOT – NA)
1.96.2 02 STABILIZER CONTROL (CENTER PIVOT)- NA
1.96.2/01 PILOT CONTROL DIAGNOSTICS
1.96.7/04 CLOSING PINS AND PLUGS ROPS (CENTER PIVOT): NA
1.96.7/05 САВ / VARIOUS COMPONENTS (CENTER PIVOT): NA
1.96.7/06 САВ: VARIOUS COMPONENTS (CENTER PIVOT): NA
1.96.7/07 CLOSING PINS AND PLUGS ROPS (CENTER PIVOT): NA
1.98.0/01 INFORMATION SYMBOL DECALS (POWER SHUПLE – POWER SHIFТ) – NA
1.98.1 08 IDENTIFICATION MODEL: GUARD DECALS
1.98.1 11 В95ВТС MODEL IDENTIFICATIO – NA
82.00 01 DRIVING WHEELS(4WD) – NA
83.00 01 REAR WHEELS – NA
095 STABILIZER CONTROL WITHOUT AUTO-UP (CENTER PIVOT)
096 STABILIZER CONTROL WITH AUTO-UP (CENTER PIVOT)
131 SINGLE ВАТТЕRУ
175 AIR INTAKE САР & PRE-CLEANER
176 AIR INTAKE САР & PRE-CLEANER
201 SHOVEL AND REAR LIFТING HOOKS
284 REAR MIRROR (САВ)- NA
290 FRONT COUNTERWEIGHT: 2WS
291 FRONT COUNTERWEIGHT: 2WS
302 01 TWO-SECTION CONTROL VALVE FOR LOADER
302 02 LOADER АТТАСНМЕNТ 2-SECTION CONTROL VALVE: INTAKE SECTION
302 03 LOADER АТТАСНМЕNТ 2-SECTION CONTROL VALVE: ВООМ SECTION
302 04 TWO-SECTION CONTROL VALVE FOR LOADER
321 DOUBLE ВАТТЕRУ
331 01 TOWER ASSY 6 SECTIONS (CENTER PIVOT)
331 02 PILOT CONTROL VALVE SUPPORT, COMPLETE
331 03 PILOT CONTROL VALVE SUPPORT, COMPLETE
331 04 PILOT CONTROL VALVE SUPPORT, COMPLETE
331 05 PILOT CONTROL VALVE SUPPORT, COMPLETE
331 06 6 SECTION PILOT CONTROL VALVE SUPPORT, COMPLETE
331 07 PILOT CONTROL VALVE SUPPORT, COMPLETE
331 08 PILOT CONTROL VALVE SUPPORT, COMPLETE
331 09 PILOT CONTROL VALVE SUPPORT, COMPLETE
331/ А PROPORTIONAL CONTROL VALVE 6 SECTIONS
331/ В 01 ВАСКНОЕ CONTROL VALVE, 6 SECTIONS (CENTER PIVOT)
331/ В 02 ВАСКНОЕ CONTROL VALVE, INLET SECTION (CENTER PIVOT)
331/ В 03 ВАСКНОЕ CONTROL VALVE, ВООМ SECTION (CENTER PIVOT)
331/ В 04 ВАСКНОЕ CONTROL VALVE, SWING SECTION (CENTER PIVOT)
331/ В 05 ВАСКНОЕ CONTROL VALVE, BUCKET SECTION (CENTER PIVOT)
331/ В 06 ВАСКНОЕ CONTROL VALVE, DIPPERSTICK SECTION (CENTER PIVOT)
331/ В 07 ВАСКНОЕ CONTROL VALVE, STABILIZER SECTION (CENTER PIVOT)
331/ В 08 ВАСКНОЕ CONTROL VALVE, ВООМ SECTION (CENTER PIVOT)
331/ В 09 ВАСКНОЕ CONTROL VALVE, SWING SECTION (CENTER PIVOT)
331/ В 10 ВАСКНОЕ CONTROL VALVE, BUCKET SECTION (CENTER PIVOT)
331/ В 11 ВАСКНОЕ CONTROL VALVE, DIPPERSTICK SECTION (CENTER PIVOT)
331/ В 12 ВАСКНОЕ CONTROL VALVE, STABILIZER SECTION (CENTER PIVOT
331/ С 01 PILOT VALVE OF HYORAULIC CONTROL LEVER (RIGHT HANO)
331/ С 02 VALVE, JOYSTICK PILOT CONTROLS (LEFT HANO)
333 01 TOWER ASSY 7 SECTIONS (CENTER PIVOT}
333 02 TOWER ASSY FOR 7-SECTION PILOT CONTROL: CONTROL VALVE HYORAULIC
SYSTEM, PROPORTIONAL VALVE
333 03 TOWER ASSY FOR 7-SECTION PILOT CONTROL (CENTER PIVOT}: CONTROL
VALVE INSTALLATION
333 04 TOWER ASSY FOR 7-SECTION PILOT CONTROL (CENTER PIVOT}: TELESCOPIC
CYLINOER SYSTEM
333 05 TOWER ASSY FOR 7-SECTION PILOT CONTROL (CENTER PIVOT): 8UCKET
CYLINOER SYSTEM
333/ А PROPORTIONAL CONTROL VALVE 7 SECTIONS
333/ С 01 PILOT VALVE OF HYORAULIC CONTROL LEVER (RIGHT HANOS) 7 SPOOLS
333/ С 02 PILOT VALVE OF HYORAULIC CONTROL LEVER (RIGHT HANOS) 7 SPOOLS
333/018 01 7 SECTIONS EXCAVA TOR CONTROL VALVE (CENTER PIVOT) – NA
333/018 02 8АСКНОЕ АТТАСНМЕNТ 7-SECTION CONTROL VALVE (CENTER PIVOT): NA:
TELESCOPIC CYLINOER
335 TOWER ASSY 7 SECTIONS (CENTER PIVOT)
336/01 01 TWO SECTION LOAOER CONTROL VALVE (CENTER PIVOT) – NA
336/01 02 LOAOER CONTROL VALVE, TWO SECTION, САР & UNLOAO VALVE (CENTER
PIVOT)- NA
336/01 03 LOAOER CONTROL VALVE, TWO SECTION, RELIEF & СНЕСК VALVES (CENTER
PIVOT}- NA
336/01 04 LOAOER CONTROL VALVE, TWO SECTION, 8Y-PASS КIТ (CENTER PIVOT}- NA
336/01 05 LOAOER CONTROL VALVE, TWO SECTION, UNLOAO КIТ OR OUMP VALVE
(CENTER PIVOT} – NA
337 01 LOCКING VALVE ON LOAOER АТТАСНМЕNТ TIPPING CYLINOERS
337 02 LOCK VALVE ON LOAOER LIFT CYLINOERS
338 LOCK VALVE ON LOAOER LIFT CYLINOERS
344 01 STA8ILIZER CONTROL VALVE, TWO SECTION (CENTER PIVOT}- NA
344 02 STA8ILIZER CONTROL VALVE, LH & RH SECTION (CENTER PIVOT}- NA
346 01 А/С HOUSING & FIL TERS
346 02 А/С 8LOWER & COILS
346 03 HEATER COIL HOSES
346 04 А/С & HEATER CONTROL PANEL
346 05 А/С & HEATER CONSOLE OUCTS
347 01 HOUSING & FIL TERS
347 02 HEATER 8LOWER & COILS
347 03 HEATER COIL HOSES
347 04 А/С & HEATER CONTROL PANEL
347 05 А/С & HEATER CONSOLE OUCTS
347 06 СА8 HEATING COATING PLUG
386 12″ (305ММ) НО 8АСКНОЕ 8UCKET WITH PIN ТЕЕТН – NA
387 18″ (457ММ) НО 8АСКНОЕ 8UCKET WITH PIN ТЕЕТН – NA
388 24″ (610ММ) НО 8АСКНОЕ 8UCKET WITH PIN ТЕЕТН – NA
389 30″ (762ММ) НО 8АСКНОЕ 8UCKET WITH PIN ТЕЕТН – NA
390 LOAOER CONTROL VALVE, TWO SECTION, LEVER- NA
390/01 36″ (910ММ) НО 8АСКНОЕ 8UCKET WITH PIN ТЕЕТН – NA
391 LOCK VALVE FOR 8UCKET 4Х1 / 6Х1
392 01 LOCКING VALVE ON 8OOМ CYLINOER ANO 8АСКНОЕ АТТАСНМЕNТ
392 02 LOCКING VALVE ON CYLINOER ANO 8АСКНОЕ АТТАСНМЕNТ
393 2 LEVER ВАСКНОЕ CONTROLS, LEVER, ВООТ & DECALS – NA
394 01 4-LEVER ВАСКНОЕ АТТАСНМЕNТ CONTROLS, CONSOLE, LEVERS AND SQUARE
LEVER (CENTER PIVOT: SIDE SHIFT): CONTROL LEVERS
394 02 4-LEVER ВАСКНОЕ АТТАСНМЕNТ CONTROLS, UPPER TIE ROD ASSY (CENTER
PIVOT: SIDE SHIFT): UPPER TIE RODS
394 03 4-LEVER ВАСКНОЕ АТТАСНМЕNТ CONTROLS, LOWER TIE ROD ASSY (CENTER
PIVOT: SIDE SHIFT): LOWER TIE RODS
394/01 01 2-LEVER ISO ВАСКНОЕ АТТАСНМЕNТ CONTROLS, LEVERS, DUSTPROOF,
DECALS (CENTER PIVOT) – NA -CONTROL LEVERS
402 01 (4WD) FRONT AXLE, HOUSING, BUSHINGS & SUPPORTS – NA
402 02 (4WD) FRONT AXLE, SWIVEL HOUSING & STEERING CYLINDER – NA
402 03 (4WD) FRONT AXLE, HUBS – NA
402 04 (4WD) FRONT AXLE, RING GEAR & PINION ASSEMBL У – NA
402 05 (4WD) FRONT AXLE, DIFFERENTIAL – NA
402 06 FRONT AXLE 4WD, ARTICULATED AXLE SHAFТ
416 SYSTEM HAMMER COMPONENTS (САВ – ROPS)
431 01 STANDARD (1М3) BUCKET
431 02 4Х1 BUCKET DUCTS WITH STANDARD BUCKET
431 03 LOADER АТТАСНМЕNТ FFC HYDRAULIC QUICK COUPLER: ВООМ SYSTEM
431 04 LOADER АТТАСНМЕNТ FFC HYDRAULIC QUICK COUPLER: MACHINE SYSTEM
431 05 LOADER АТТАСНМЕNТ FFC HYDRAULIC QUICK COUPLER: CARRIER ASSY
432 01 STANDARD (1М3) BUCKET
432 02 4Х1 BUCKET HYDRAULIC DUCTS WITH REVERSIBLE BUCKET
432 03 FFC LOADER HYDRAULIC QUICK COUPLER: ARM SYSTEM
432 04 FFC LOADER HYDRAULIC QUICK COUPLER: MACHINE SYSTEM
433 01 BUCKET 4Х1 WITH BLADE
433 02 BUCKET 4Х1
433 03 4Х1 BUCKET HYDRAULIC DUCTS WITH ADDITIONAL BUCKET
433 04 FFC LOADER HYDRAULIC QUICK COUPLER: ARM SYSTEM
433 05 FFC LOADER HYDRAULIC QUICK COUPLER: MACHINE SYSTEM
434 01 BUCKET 4Х1 WITH TINE
434 02 4Х1 BUCKET HYDRAULIC DUCTS WITH ТЕЕТН
434 03 FFC LOADER HYDRAULIC QUICK COUPLER: ARM SYSTEM
434 04 FFC LOADER HYDRAULIC QUICK COUPLER: MACHINE SYSTEM
437 GLIDE RIDE VALVE,HYDRAULIC SYSTEM FOR MACHINE FRAME LEVELLING
471/01 HYDRAULIC CYLINDER (BUCKET 4Х1-6Х1)
471/02 01 BUCKET 4Х1 (1 М3) WITH BLADE “COMMON GREY”
471/02 02 4Х1 AND 6Х1 BUCKET (POWER SHUПLE) HYDRAULIC DUCTS WITH “COMMON
GREY” BLADE
471/02 03 BUCKET 4Х1 (1 М3) WITH BLADE “COMMON GREY”
472/01 01 BUCKET 4Х1 (1 М3) WITH TINE “COMMON GREY”
472/01 02 4Х1 AND 6Х1 (POWER SHUТТLE) BUCKET HYDRAULIC DUCTS WITH “COMMON
GREY”TEETH
472/01 03 BUCKET 4Х1 (1 М3) WITH TINE “COMMON GREY”
514 01 SHORT DIPPER
514 02 SHORT DIPPER
514 03 HYDRAULIC LIFТING CYLINDER
514 04 HYDRAULIC DITCHING CYLINDER
515/01 12″ (305ММ) ВАСКНОЕ BUCKET WITH PIN ТЕЕТН – NA
516/01 18″ (457ММ) ВАСКНОЕ BUCKET WITH PIN ТЕЕТН – NA
517/01 24″ (610ММ) ВАСКНОЕ BUCKET WITH PIN ТЕЕТН – NA
518/01 30″ (762ММ) ВАСКНОЕ BUCKET WITH PIN ТЕЕТН – NA
519/01 36″ (910ММ) ВАСКНОЕ BUCKET WITH PIN ТЕЕТН – NA
520 (0.88 М3} BUCKET WITHOUT TINES
520/01 18″ (457ММ) ВАСКНОЕ BUCKET WITH PIN ТЕЕТН (EXTRA НО)- NA
521 24″ (610ММ) ВАСКНОЕ BUCKET WITH PIN ТЕЕТН (EXTRA НО)- NA
522 (1 М3) BUCKET WITHOUT TINES
522/02 01 (1 М3) BUCKET WITHOUT TINES
522/02 02 4Х1 BUCKET HYORAULIC OUCTS WITH AOOITIONAL BUCKET
535 STABILIZER FOOT GROUNO (CENTER PIVOT}
536/01 01 1 М3 BUCKET WITH ТЕЕТН ANO SIDE CUПER
536/01 02 4Х1 (POWER SHUПLE) BUCKET HYORAULIC OUCTS WITH ТЕЕТН
536/02 REVERSIBLE STABILIZER FOOT (CENTER PIVOT)
537/01 01 1 М3 BUCKET WITH REVERSIBLE AOOITIONAL BLAOE (CUПING EOGE)
537/01 02 4Х1 (POWER SHUПLE) BUCKET HYORAULIC OUCTS WITH REVERSIBLE BLAOE
548 OITCH CLEANING BUCKET
622 INTERNAL FAN – САВ
636 07 ENGINE VERSION: STARTER MOTOR
636 08 ACCESSORY ENGINE -ALTERNATOR
638 01 RAOIATOR GUAROS
638 02 COOLANT RAOIATOR, HYORAULIC FLUID ANO TRANSMISSION OIL
638 03 AFТER-COOLER COOLING PIPING
638 04 PARKEERREM (CABINE: ROPS)
638 05 ENGINE VERSION: SUPPORTS
638 06 ENGINE OUTFIT: FAN WITH VISCOUS JOINT: EU
638 07 ACCESSORY ENGINE -STARTER
638 08 ACCESSORY ENGINE: ALTERNATOR
639 01 RAOIATOR GUAROS
639 02 COOLANT RAOIATOR, HYORAULIC FLUID ANO TRANSMISSION OIL
639 03 AFTER-COOLER COOLING PIPING
639 04 PARKEERREM (CABINE: ROPS)
639 05 ENGINE VERSION: SUPPORTS
639 06 ENGINE OUTFIT: FAN WITH VISCOUS JOINT
639 07 ENGINE VERSION: STARTER MOTOR
639 08 ACCESSORY ENGINE
646 01 MACHINE PART AIR CONOITIONING SET
646 02 А/С COMPRESSOR AПACHING GROUP
646 03 А/С COMPRESSOR
646 04 А/С FIL TER & CONOENSER AПACHING GROUP
650 STEERING COLUMN, FIXEO & AOJUSTABLE
698 GLIDE RIDE VALVE,HYORAULIC SYSTEM FOR MACHINE FRAME LEVELLING &
ON/OFF SWITCH
699 HANO HAMMER SWITCH
700/02 01 4Х1 ANO 6Х1 BUCKET HYORAULIC OUCTS ANO 3-SECTION CONTROL VALVE
(POWER SHUПLE}: MACHINE SYSTEM: NA
721 01 TELESCOPIC OIPPER АТ PEOAL CONTROL (CENTER PIVOT): CONTROL VALVE: NA
721 02
721 03 НЕО TELESCOPIC CONTORL VALVE, SECTION HOSES(CENTER PIVOT)- NA
721 04 TELESCOPIC OIPPER АТ PEOAL CONTROL (CENTER PIVOT): TELESCOPIC
OIPPER SYSTEM: TELESCOPIC CYLINOER: NA
721 05 TELESCOPIC OIPPER АТ PEOAL CONTROL (CENTER PIVOT): TELESCOPIC
OIPPER SYSTEM: BUCKET CYLINOER: NA
721 06 TELESCOPIC DIPPER АТ PEDAL CONTROL (CENTER PIVOT}: NA
724/ А REAR HAMMER CONTROL VALVE
724/01 01 MACHINE HYDRAULIC SYSTEM FOR HAMMER (CENTER PIVOT}
724/01 02 HAMMER ARM HYDRAULIC SYSTEM (CENTER PIVOT}
724/02 HYDRAULIC SYSTEM FOR HAMMER (CENTER PIVOT}
725 HAMMER КIТ FROM LIFTING ARM ТО DEMOLITION ARM
725/01 01 4Х1 AND 6Х1 BUCKET ARM ASSY HYDRAULIC SYSTEM (POWER SHUПLE}: NA
725/01 02 4Х1 AND 6Х1 BUCKET MACHINE HYDRAULIC DUCT ASSY (POWER SHUПLE}: NA
725/01 03 LOADER CONTROL VALVE, THREE SECTION (CENTER PIVOT}- NA
725/01 04 LOADER CONTROL VALVE, THREE SECTION, САР & UNLOAD VALVE (CENTER
PIVOT)- NA
725/01 05 LOADER CONTROL VALVE, THREE SECTION, RELIEF & СНЕСК VALVES (CENTER
PIVOT)- NA
725/01 06 THREE-SECTION CONTROL VALVE FOR LOADER- BUCKET SECTION 4Х1 –
6X1(CENTER PIVOT)- NA
725/03 01 4Х1 AND 6Х1 BUCKET MACHINE HYDRAULIC DUCT ASSY (POWER SHUПLE): NA
727/01 HED FOOT PEDAL, CABLE & DECALS (CENTER PIVOT) – NA
728 01 HAND HAMMER SYSTEM: DELIVERY
728 02 HAND HAMMER SYSTEM: RETURN
728 03 MANUAL HAMMER VALVE
733 REAR MECHANICAL QUICK-COUPLING
758 ROTATING BEACON
787 FRONT CONSOLE WITHOUT SPEEDOMETER (POWER SHUПLE, ROPS)
787/01 FRONT CONSOLE WITHOUT SPEEDOMETER (POWER SHUПLE, САВ)
788 FRONT CONSOLE WITH SPEEDOMETER (ROPS)
788/01 FRONT CONSOLE WITH SPEEDOMETER (САВ) (POWER SHUПLE}
789 SPEED SENSOR(P.SHUПLE}
793 FRONT WORКING LIGHT – САВ
793/01 FRONT WORКING LIGHT (ROPS)
794 LAMPS & LIGHTS – САВ
794/01 LAMPS & LIGHTS (ROPS)
796 ANTITHEFT
803 FENDERS, FRONT
835 REAR MUDGUARD AND ROOF (ROPS: САВ): NA
851 CLOTH SEAT & AПACHING HARDWARE – CABINE
851/01 01 CLOTH SEAT CUSHIONS, ARMRESTS & RELATED PARTS
851/01 02 CLOTH SEAT MOUNTING PLATE, ADJUSTING RAILS & SEAT BELT
851/01 03 CLOTH SEAT UPPER SUSPENSION PARTS
851/01 04 CLOTH SEAT LOWER SUSPENSION PARTS
855 AIR RIDE CLOTH SEAT & AПACHING HARDWARE – CABINE
855/01 01 AIR RIDE CLOTH SEAT CUSHIONS, ARMRESTS & RELATED PARTS
855/01 02 AIR RIDE CLOTH SEAT MOUNTING PLATE, ADJUSTING RAILS & SEAT BELT
855/01 03 AIR RIDE CLOTH SEAT UPPER SUSPENSION PARTS
855/01 04 AIR RIDE CLOTH SEAT LOWER SUSPENSION PARTS
855/01 05 AIR RIDE CLOTH SEAT COMPRESSOR & TUBING
856 VINYL SEAT CUSHIONS, ARMRESTS & RELATED PARTS (ROPS)
856/01 01 VINYL SEAT WITH ARMRESTS & MOUNTING HARDWARE (ROPS)
856/01 02 VINYL SEAT MOUNTING PLATE, ADJUSTING RAILS & SEAT BEL Т (ROPS)
856/01 03 VINYL SEAT UPPER SUSPENSION PARTS (ROPS)
856/01 04 VINYL SEAT LOWER SUSPENSION PARTS (ROPS)
879 САВ RIGHT REAR MIRROR
TABLE OF CONTENTS
LONG DIPPER: ASSY
ВООМ – LONG DIPPER
LONG/SHORT DIPPER – BUCKET MOTION
DIPPER: DIPPER SYSTEM, ВООМ AND DIPPER CYLINDER
DIPPER: BUCKET CYLINDER HYDRAULIC SYSTEM
DIPPER: ВООМ CYLINDER HYDRAULIC SYSTEM
DIPPER – HYDRAULIC SYSTEM
HYDRAULIC DITCHING CYLINDER
HYDRAULIC BUCKET CYLINDER
TELESCOPIC DIPPER – HYDRAULIC SYSTEM
SHORT TELESCOPIC DIPPER: ASSY
TELESCOPIC DIPPER SHORT
SHORT TELESCOPIC DIPPER: TELESCOPIC HYDRAULIC CYLINDER
TOOL КIТ
PLATES-NA
PLATES-NA
COLD START

Contact us: [email protected]

https://vimeo.com/731662905

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.M