New Holland B95C B95C LR B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 47781868 – PDF DOWNLOAD

Description

New Holland B95C B95C LR B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 47781868 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland B95C B95C LR B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 47781868 – PDF DOWNLOAD

GENERAL INFORMATION:
Note to the owner:

• This manual contains important information about the safe operation, adjustment, and maintenance of your backhoe
  loader. Refer to the table of contents in this manual as an outline or guide to information about your machine. Use
  the index at the end of this manual for locating specific items about your machine. The backhoe loader conforms to
  current safety regulations.
• Use this manual as a guide. Service your machine properly and at the suggested intervals. Regular maintenance and
  correct operation will ensure that your machine will remain a reliable working tool for a long time. If you need more
  information, contact your NEW HOLLAND CONSTRUCTION dealer.
• DO NOT operate or permit anyone to operate or service this machine until you or the other persons have read and
  understand the safety, operation, and maintenance instructions in this manual. Use only trained operators who have
  demonstrated the ability to operate and service this machine correctly and safely.
• The information in this manual is provided on the basis of information that was available at the time that the manual
  was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
  the service of the machine. Ensure that you have the complete and most current information from your dealer before
  you start any machine operation.
• The operator’s manual is to be stored in the manual compartment equipped on this machine. Make sure that this
  manual is complete and in good condition. Consult your dealer to obtain additional manuals or manuals in other
  languages. An Association of Equipment Manufacturers (AEM) safety booklet is included with each machine. Take
  the time to read the booklet and understand its content.
• Use only approved accessories and attachments designed for your machine. Consult your dealer on changes, additions,
  or modifications that may be required for your machine. Do not make any unauthorized modifications to your
  machine.

TABLE OF CONTENTS:

New Holland B95C B95C LR B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 47781868 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the owner 1-1
Intended use 1-2
Electro-Magnetic Compatibility (EMC) 1-4
Product identification 1-4
Read the operator’s manual 1-7
Operator’s manual storage on the machine 1-7
Machine orientation 1-8
Component identification 1-9
Selective Catalytic Reduction (SCR) exhaust treatment – Product overview 1-11
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Safety rules 2-2
Safety rules – California Proposition 65 Warning 2-11
Safety rules – Utility precautions 2-12
Safety rules – Fuel handling precautions 2-13
Safety rules – Specific precautions to this machine 2-14
Support strut for loader lift arm 2-15
Safety rules – Ductile iron 2-18
Hand signals 2-19
Ecology and the environment 2-26
Safety signs 2-27
Selective Catalytic Reduction (SCR) decals 2-42
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Access to operator’s platform 3-1
OPERATOR’S SEAT
Operator’s seat 3-4
FORWARD CONTROLS
Front controls 3-10
Steering column 3-12
Pedal controls 3-13
Parking brake 3-14
Transmission controls 3-15
RIGHT-HAND SIDE CONTROLS
Right-hand side controls 3-22
EXTERIOR CONTROLS
Rotating beacon (optional) 3-24
Battery master switch 3-25
INSTRUMENT CLUSTER
Instrument cluster – Front 3-26
Instrument cluster panel – Side 3-28
Instrument cluster – side 3-31
Menu screen display 3-36
Selective Catalytic Reduction (SCR) exhaust treatment – Overview 3-40
CAB CONTROLS AND ADJUSTMENTS
Cab and platform – Control identification 3-50
LOADER ATTACHMENT CONTROLS
Loader attachment controls 3-53
Loader attachment – Operation 3-54
Loader bucket control – 4×1 (If fitted) 3-56
BACKHOE ATTACHMENT CONTROLS
Backhoe attachment controls 3-57
Backhoe attachment mechanical controls version 3-62
Backhoe attachment hydraulic controls 3-72
CLIMATE CONTROLS
Heating and air-conditioning controls 3-78
Cab air louvers 3-82
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Before using the machine 4-1
Operating the machine 4-2
Run in period of a new machine 4-4
STARTING THE UNIT
Before starting the engine 4-5
Normal engine starting 4-6
Engine speed 4-7
Cold temperature operation 4-8
Hot temperature operation 4-10
Operating the machine in high altitude 4-11
Operating the machine in water 4-12
Assisted starting (Jump-starting) 4-13
STOPPING THE UNIT
Shutting down the engine 4-15
MOVING THE UNIT
Job site travel 4-16
Auto powershift 4-18
Before operating the machine 4-20
Traveling on a hill 4-21
Four-Wheel Drive (4WD) 4-22
Differential lock button 4-23
Glide Ride™ – Two-Wheel Drive (2WD) only 4-24
Auto-Glide Ride™ (AGR) – Four-Wheel Drive (4WD) only 4-25
PARKING THE UNIT
Parking the machine 4-26
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Precautions for road travel 5-1
PREPARING FOR ROAD TRANSPORT
Preparing the machine for road travel 5-2
SHIPPING TRANSPORT
Transporting on a trailer 5-8
Lifting the machine 5-10
RECOVERY TRANSPORT
Towing the machine 5-11
6 WORKING OPERATIONS
GENERAL INFORMATION
Forward-Neutral-Reverse (F-N-R) shift sensitivity 6-1
Display brightness 6-2
Maximum throttle/Cold start idle 6-3
Throttle sensitivity 6-5
Auto engine protection shutdown setting 6-6
Auto-Glide Ride™ (AGR) speed thresholds 6-8
LOADER ATTACHMENT
Personal safety 6-9
Transmission disconnect button 6-10
Job layout 6-11
Operating the loader attachment 6-12
Loader digging force 6-15
Loader attachment safety strut 6-16
Loader bucket Removal 6-19
Loader bucket Installation 6-20
Loader bucket with quick coupler (B95CTC) 6-21
Loader bucket with forks (optional) 6-23
Lifting loads with the loader attachment 6-25
BACKHOE ATTACHMENT
Personal safety 6-27
Basic instructions 6-27
Backhoe danger area 6-28
Swing lock 6-29
Basic instructions 6-30
Setting the backhoe attachment in working position 6-31
Stabilizer pads 6-36
Operating the backhoe attachment 6-38
Backhoe bucket – Remove 6-44
Backhoe bucket – Install 6-45
Backhoe bucket – Digging angle 6-46
Ballasting 6-47
Lifting loads with backhoe attachment 6-50
7 MAINTENANCE
GENERAL INFORMATION
Maintenance safety 7-1
Fire extinguisher 7-4
Capacities – B95C, B95C LR, and B95C TC 7-5
Capacities – B110C 7-7
Engine hood 7-9
Fuel tank 7-10
General specification – Diesel fuel 7-10
General specification – Biodiesel fuels 7-11
Selective Catalytic Reduction (SCR) exhaust treatment – Basic instructions 7-13
Hydraulic oil 7-15
Recommended engine oil for operating temperature ranges 7-17
Organic Acid Technology (OAT) coolant 7-18
Diagnostic/Service tool port 7-20
Hydraulic diagnostic test ports 7-21
Work hours and intervals 7-23
MAINTENANCE CHART
Maintenance chart 7-24
At warning message display
Engine air filters 7-26
Hydraulic filter(s) 7-28
Fuel system water separator 7-30
Diesel Exhaust Fluid (DEF)/AdBlue® tank – Filling 7-32
Diesel Exhaust Fluid (DEF)/AdBlue® tank – Drain fluid 7-33
Hydrocarbon management 7-35
Every 10 hours
Checks at start-up and before each workshift (10 hours) 7-36
Working attachments — Loader attachment 7-37
Working attachments — Backhoe attachment 7-38
Windshield washer fluid level — Check 7-39
Engine oil level — Check 7-40
Engine coolant — Check 7-42
Radiator, oil cooler, and condenser — Check 7-43
Alternator — Check 7-44
Hydraulic oil level — Check 7-45
Hydraulic hoses, tubes, and fittings 7-47
Every 50 hours
Working attachments – greasing 7-48
Door hinges 7-49
Front axle trunnion 7-49
Front axle king pins 7-50
Seat and seat belt 7-51
Fuel pre-filter – draining condensation 7-52
Tire pressure 7-54
Every 250 hours
Drive shaft lubrication 7-58
Engine cooling system — Check 7-59
Fuel tank – Drain fluid 7-60
Hydraulic oil tank breather / filler cap – cleaning 7-61
Transmission oil level 7-62
Front axle breather (4WD) – Clean 7-63
Front axle and reduction gear oil level (4WD) 7-64
Front axle system – Check — (2WD) 7-66
Rear axle oil level – Check 7-67
Rear axle breather 7-68
Radiator and condenser – cleaning 7-69
Drive belts – check 7-70
Cab air filter 7-71
Heater and evaporator (Air-conditioning system) – Cleaning 7-74
Telescopic dipper 7-75
Battery terminals 7-76
Cab protection system 7-78
Every 500 hours
Engine oil and filter 7-81
Fuel filter 7-85
Fuel prefilter 7-86
Diesel Exhaust Fluid (DEF)/AdBlue® tank filler screen 7-88
Diesel Exhaust Fluid (DEF)/AdBlue® in-line filter 7-90
Every 1000 hours
Hydraulic oil filter 7-93
Hydraulic oil 7-95
Power shuttle transmission – Oil change 7-98
Power shuttle transmission – Oil filter replacement 7-100
Power shuttle transmission – Screen filter cleaning 7-102
Powershift transmission – Oil change 7-104
Powershift transmission – Oil filter replacement 7-106
Front axle fluid – Four-Wheel Drive (4WD) 7-108
Rear axle 7-110
Machine inspection and cleaning 7-111
Brake pedal lever – Greasing 7-112
Hydraulic cylinders 7-113
Alternator – check 7-114
Every 1500 hours of operation or annually
Engine breather filter 7-115
Every 3000 hours
Diesel Exhaust Fluid (DEF)/AdBlue® supply module filter 7-116
Every 4000 hours
Engine coolant 7-122
As required
Drive belt 7-124
Air-conditioning compressor drive belt 7-126
Turbocharger – Check 7-127
Fuel system bleeding 7-128
Wheels and tires 7-129
Hydraulic system – Release pressure 7-133
Bulbs 7-136
Fuses and relays – Powershift 7-138
Fuses and relays – Power shuttle 7-144
Telematics system fuses (if equipped) 7-150
Battery removal and installation 7-151
Telescopic dipper (if equipped) 7-153
Bucket teeth 7-154
Loader bucket – Self-leveling adjustment 7-155
Disable parking brake 7-157
STORAGE
Machine storage 7-159
Preparation for use after storage 7-160
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Troubleshooting 8-1
Engine – Troubleshooting 8-3
Starter motor – Troubleshooting 8-5
Alternator – Troubleshooting 8-6
Transmission – Troubleshooting 8-7
Axles – Troubleshooting 8-10
Steering system – Troubleshooting 8-13
Hydraulic systems – Troubleshooting 8-14
Loader attachment – Troubleshooting 8-15
Backhoe attachment – Troubleshooting 8-16
Swing – Troubleshooting 8-17
Hydraulic pump – Troubleshooting 8-18
Electrical systems – Troubleshooting 8-19
Cab – Troubleshooting 8-20
Air-conditioning system – Troubleshooting 8-21
ALARM(S)
Display screen messages 8-22
9 SPECIFICATIONS
Capacities – B95C, B95C LR, and B95C TC 9-1
Capacities – B110C 9-3
Engine 9-5
Powertrain 9-7
Brakes and controls – General specification 9-8
Hydraulics 9-9
Front counterweight 9-10
Noise and vibration levels 9-11
Buckets 9-12
Tires 9-13
Dimensions and performance 9-15
Performance of loader attachment with forks 9-19
Backhoe attachment performance 9-20
Backhoe attachment lifting capacity 9-24
10 ACCESSORIES
Mechanical loader bucket quick coupler 10-1
Mechanical backhoe bucket quick coupler 10-2
Backhoe attachment auxiliary hydraulic tools 10-4
Hand held auxiliary hydraulic tools 10-5
Backhoe attachment safety valves 10-6
Reversible stabilizer pads 10-7
Telematics – Overview with New Holland FleetForce™ 10-8

Contact us: [email protected]

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V