New Holland B95C B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 47987572 – PDF DOWNLOAD

Description

New Holland B95C B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 47987572 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland B95C B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 47987572 – PDF DOWNLOAD

GENERAL INFORMATION:
Note to the owner:

• This manual contains important information about the safe operation, adjustment, and maintenance of your tractor
  loader. Refer to the table of contents in this manual as an outline or guide to information about your machine. Use the
  index at the end of this manual for locating specific items about your machine. The tractor loader conforms to current
  safety regulations.
• Use this manual as a guide. Service your machine properly and at the suggested intervals. Regular maintenance and
  correct operation will ensure that your machine will remain a reliable working tool for a long time. If you need more
  information, contact your NEW HOLLAND CONSTRUCTION dealer.
• DO NOT operate or permit anyone to operate or service this machine until you or the other persons have read and
  understand the safety, operation, and maintenance instructions in this manual. Use only trained operators who have
  demonstrated the ability to operate and service this machine correctly and safely.
• The information in this manual is provided on the basis of information that was available at the time that the manual
  was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
  the service of the machine. Ensure that you have the complete and most current information from your dealer before
  you start any machine operation.
• The operator’s manual is to be stored in the manual compartment equipped on this machine. Make sure this manual
  is complete and in good condition. Consult your dealer to obtain additional manuals or manuals in other languages.
• An Association of Equipment Manufacturers (AEM) safety booklet is included with each machine. Take the time to
  read the booklet and understand its content.
• Contact your NEW HOLLAND CONSTRUCTION dealer for any further information or assistance about your machine.
  Your dealer has NEW HOLLAND CONSTRUCTION approved service parts. Your dealer has technicians with special
  training that know the best methods of repair and maintenance for your machine. NEW HOLLAND CONSTRUCTION
  customer assistance is also available. Go to www.newholland.com.
• Use only approved accessories and attachments designed for your machine. Consult your dealer on changes, additions,
  or modifications that may be required for your machine. Do not make any unauthorized modifications to your
  machine.

TABLE OF CONTENTS:

New Holland B95C B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 47987572 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the owner 1-1
Intended use 1-2
Electro-Magnetic Compatibility (EMC) 1-4
Product Identification Number (PIN) 1-4
Read the operator’s manual 1-7
Operator’s manual storage 1-7
Machine orientation 1-8
Component identification 1-9
Selective Catalytic Reduction (SCR) exhaust treatment – Product overview 1-11
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Safety rules 2-2
Safety rules – California Proposition 65 Warning 2-11
Safety rules – Utility precautions 2-12
Safety rules – Fuel handling precautions 2-13
Safety rules – Specific precautions to this machine 2-14
Support strut for loader lift arm 2-15
Safety rules – Ductile iron 2-18
Hand signals 2-19
Ecology and the environment 2-26
Safety signs 2-27
Selective Catalytic Reduction (SCR) decals 2-42
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Access to operator’s platform 3-1
OPERATOR’S SEAT
Operator’s seat 3-4
FORWARD CONTROLS
Front controls 3-10
Steering column 3-12
Pedal controls 3-13
Parking brake 3-14
Transmission controls 3-15
RIGHT-HAND SIDE CONTROLS
Right-hand side controls 3-22
EXTERIOR CONTROLS
Rotating beacon (optional) 3-24
Battery master switch 3-25
INSTRUMENT CLUSTER
Instrument cluster – Front 3-26
Instrument cluster panel – Side 3-28
Instrument cluster – side 3-31
Menu screen display 3-36
Selective Catalytic Reduction (SCR) exhaust treatment – Overview 3-40
CAB CONTROLS AND ADJUSTMENTS
Cab and platform – Control identification 3-44
LOADER ATTACHMENT CONTROLS
Loader attachment controls 3-47
Loader attachment – Operation 3-48
Loader bucket control – 4×1 (If fitted) 3-50
BACKHOE ATTACHMENT CONTROLS
Backhoe attachment controls 3-51
Backhoe attachment mechanical controls version 3-54
Backhoe attachment hydraulic controls 3-64
CLIMATE CONTROLS
Heating and air-conditioning controls 3-70
Cab air louvers 3-75
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Before using the machine 4-1
Operating the machine 4-2
Running-in period 4-4
STARTING THE UNIT
Before starting the engine 4-5
Normal engine starting 4-6
Engine speed 4-7
Cold temperature operation 4-8
Hot temperature operation 4-10
Operating the machine in high altitude 4-11
Operating the machine in water 4-12
Assisted starting (Jump-starting) 4-13
STOPPING THE UNIT
Shutting down the engine 4-15
MOVING THE UNIT
Job site travel 4-16
Auto powershift 4-18
Before operating the machine 4-20
Traveling on a hill 4-21
Four-Wheel Drive (4WD) 4-22
Differential lock button 4-23
Glide Ride™ – Two-Wheel Drive (2WD) only 4-24
Auto-Ride Control™ (ARC) – Four-Wheel Drive (4WD) only 4-25
PARKING THE UNIT
Parking the machine 4-26
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Precautions for road travel 5-1
PREPARING FOR ROAD TRANSPORT
Preparing the machine for road travel 5-2
SHIPPING TRANSPORT
Transporting on a trailer 5-7
Lifting the machine 5-9
RECOVERY TRANSPORT
Towing the machine 5-10
6 WORKING OPERATIONS
GENERAL INFORMATION
Forward-Neutral-Reverse (F-N-R) shift sensitivity 6-1
Display brightness 6-2
Maximum throttle/Cold start idle 6-3
Throttle sensitivity 6-5
Auto-Ride Control™ (ARC) speed thresholds 6-6
LOADER ATTACHMENT
Personal safety 6-7
Transmission disconnect button 6-8
Job layout 6-9
Operating the loader attachment 6-10
Loader digging force 6-13
Loader attachment safety strut 6-14
Loader bucket Removal 6-17
Loader bucket Installation 6-18
Loader bucket with quick coupler (B95CTC) 6-19
Loader bucket with forks (optional) 6-21
Lifting loads with the loader attachment 6-23
BACKHOE ATTACHMENT
Personal safety 6-25
Basic instructions 6-25
Backhoe danger area 6-26
Basic instructions 6-27
Setting the backhoe attachment in working position 6-28
Stabilizer pads 6-31
Operating the backhoe attachment 6-33
Backhoe bucket – Remove 6-39
Backhoe bucket – Install 6-40
Backhoe bucket – Digging angle 6-41
Ballasting 6-42
Lifting loads with backhoe attachment 6-45
7 MAINTENANCE
GENERAL INFORMATION
Capacities – B95C and B95C TC 7-1
Capacities – B110C 7-3
Engine hood 7-5
Fuel tank 7-6
General specification – Diesel fuel 7-6
General specification – Biodiesel fuels 7-7
Selective Catalytic Reduction (SCR) exhaust treatment – Basic instructions 7-9
Hydraulic oil 7-11
Engine oil viscosity 7-13
Organic Acid Technology (OAT) coolant 7-14
Maintenance safety 7-16
Work hours and intervals 7-18
MAINTENANCE CHART
Maintenance chart 7-19
At warning message display
Engine air filters 7-21
Hydraulic filter(s) 7-23
Fuel system water separator 7-25
Diesel Exhaust Fluid (DEF)/AdBlue® tank – Filling 7-27
Diesel Exhaust Fluid (DEF)/AdBlue® tank – Drain fluid 7-28
Every 10 hours
Checks at start-up and before each workshift (10 hours) 7-30
Working attachments — Loader attachment 7-31
Working attachments — Backhoe attachment 7-32
Windshield washer fluid level — Check 7-33
Engine oil level — Check 7-34
Engine coolant — Check 7-36
Radiator, oil cooler, and condenser — Check 7-37
Alternator — Check 7-38
Hydraulic oil level — Check 7-39
Hydraulic hoses, tubes, and fittings 7-41
Every 50 hours
Working attachments – greasing 7-42
Door hinges 7-43
Front axle trunnion 7-43
Front axle king pins 7-44
Seat and seat belt 7-45
Fuel pre-filter – draining condensation 7-46
Tire pressure 7-48
Every 250 hours
Drive shaft lubrication 7-52
Engine cooling system — Check 7-53
Fuel tank – Drain fluid 7-54
Hydraulic oil tank breather / filler cap – cleaning 7-55
Transmission oil level 7-56
Front axle breather (4WD) – Clean 7-57
Front axle and reduction gear oil level (4WD) 7-58
Front axle system – Check — (2WD) 7-60
Rear axle oil level – Check 7-61
Rear axle breather 7-62
Radiator and condenser – cleaning 7-63
Drive belts – check 7-64
Cab air filter 7-65
Heater and evaporator (Air-conditioning system) – Cleaning 7-68
Telescopic dipper 7-69
Battery terminals 7-70
Cab protection system 7-72
Every 500 hours
Engine oil and filter 7-75
Fuel filter 7-79
Fuel prefilter 7-80
Diesel Exhaust Fluid (DEF)/AdBlue® tank filler screen 7-82
Diesel Exhaust Fluid (DEF)/AdBlue® in-line filter 7-84
Every 1000 hours
Hydraulic oil filter 7-87
Hydraulic oil 7-89
Power shuttle transmission – Oil change 7-92
Power shuttle transmission – Oil filter replacement 7-94
Power shuttle transmission – Screen filter cleaning 7-95
Powershift transmission – Oil change 7-97
Powershift transmission – Oil filter replacement 7-99
Front axle fluid – Four-Wheel Drive (4WD) 7-100
Rear axle 7-102
Machine inspection and cleaning 7-103
Brake pedal lever – Greasing 7-104
Hydraulic cylinders 7-105
Alternator – check 7-106
Every 1500 hours
Engine breather filter 7-107
Every 3000 hours
Diesel Exhaust Fluid (DEF)/AdBlue® supply module filter 7-108
Every 4000 hours
Engine coolant 7-114
As required
Drive belt 7-116
Air-conditioning compressor drive belt 7-118
Turbocharger – Check 7-119
Fuel system bleeding 7-120
Wheels and tires 7-121
Hydraulic system – Release pressure 7-123
Bulbs 7-126
Fuses and relays – Powershift 7-128
Fuses and relays – Power shuttle 7-133
Telematics system fuses (if equipped) 7-138
Battery removal and installation 7-139
Telescopic dipper (if equipped) 7-141
Bucket teeth 7-142
Loader bucket – Self-leveling adjustment 7-143
Disable parking brake 7-145
STORAGE
Machine storage 7-147
Preparation for use after storage 7-148
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Troubleshooting 8-1
Engine – Troubleshooting 8-3
Starter motor – Troubleshooting 8-5
Alternator – Troubleshooting 8-6
Transmission – Troubleshooting 8-7
Axles – Troubleshooting 8-10
Steering system – Troubleshooting 8-13
Hydraulic systems – Troubleshooting 8-14
Loader attachment – Troubleshooting 8-15
Backhoe attachment – Troubleshooting 8-16
Swing – Troubleshooting 8-17
Hydraulic pump – Troubleshooting 8-18
Electrical systems – Troubleshooting 8-19
Cab – Troubleshooting 8-20
Air-conditioning system – Troubleshooting 8-21
ALARM(S)
Display screen messages 8-22
9 SPECIFICATIONS
Capacities – B95C and B95C TC 9-1
Capacities – B110C 9-3
Engine 9-5
Powertrain 9-7
Brakes and controls – General specification 9-8
Hydraulics 9-9
Front counterweight 9-10
Noise and vibration levels 9-11
Buckets 9-12
Tires 9-13
Dimensions and performance 9-16
Performance of loader attachment with forks 9-20
Backhoe attachment performance 9-21
Backhoe attachment lifting capacity 9-27
10 ACCESSORIES
Mechanical loader bucket quick coupler 10-1
Mechanical backhoe bucket quick coupler 10-2
Backhoe attachment auxiliary hydraulic tools 10-4
Hand held auxiliary hydraulic tools 10-5
Backhoe attachment safety valves 10-6
Reversible stabilizer pads 10-7
Telematics – Overview with New Holland FleetForce™ 10-8

Questions? Email us: [email protected]

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V