New Holland B95C B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 51420356 – PDF DOWNLOAD

Description

New Holland B95C B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 51420356 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland B95C B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 51420356 – PDF DOWNLOAD

PIN NZHH03067 and above

GENERAL INFORMATION:
Note to the owner:

• This manual contains important information about the safe operation, adjustment, and maintenance of your backhoe
  loader. Refer to the table of contents in this manual as an outline or guide to information about your machine. Use
  the index at the end of this manual for locating specific items about your machine. The backhoe loader conforms to
  current safety regulations.
• Use this manual as a guide. Service your machine properly and at the suggested intervals. Regular maintenance and
  correct operation will ensure that your machine will remain a reliable working tool for a long time. If you need more
  information, contact your NEW HOLLAND CONSTRUCTION dealer.
• DO NOT operate or permit anyone to operate or service this machine until you or the other persons have read and
  understand the safety, operation, and maintenance instructions in this manual. Use only trained operators who have
  demonstrated the ability to operate and service this machine correctly and safely.
• The information in this manual is provided on the basis of information that was available at the time that the manual
  was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
  the service of the machine. Ensure that you have the complete and most current information from your dealer before
  you start any machine operation.
• The operator’s manual is to be stored in the manual compartment equipped on this machine. Make sure that this
  manual is complete and in good condition. Consult your dealer to obtain additional manuals or manuals in other
  languages. An Association of Equipment Manufacturers (AEM) safety booklet is included with each machine. Take
  the time to read the booklet and understand its content.

TABLE OF CONTENTS:

New Holland B95C B95C TC B110C Tier 4B (final) Tractor Loader Backhoe Operator’s Manual 51420356 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the owner 1-1
Intended use 1-2
Electro-Magnetic Compatibility (EMC) 1-4
Product identification 1-4
Read the operator’s manual 1-7
Operator’s manual storage on the machine 1-7
Machine orientation 1-8
Component identification 1-9
Selective Catalytic Reduction (SCR) exhaust treatment – Product overview 1-11
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Safety rules 2-2
Safety rules – Utility precautions 2-11
Safety rules – Fuel handling precautions 2-12
Safety rules – Specific precautions to this machine 2-13
Support strut for loader lift arm 2-14
Safety rules – Ductile iron 2-17
Hand signals 2-18
Ecology and the environment 2-25
Safety signs 2-26
Selective Catalytic Reduction (SCR) decals 2-41
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Access to operator’s platform 3-1
OPERATOR’S SEAT
Operator’s seat 3-4
FORWARD CONTROLS
Steering column 3-9
Front controls 3-10
Right-hand side control lever 3-12
Pedal controls 3-13
Transmission controls 3-14
RIGHT-HAND SIDE CONTROLS
Key start switch 3-21
Instrument cluster panel – Side 3-22
EXTERIOR CONTROLS
Rotating beacon (Optional) 3-25
Battery master switch 3-26
INSTRUMENT CLUSTER
Instrument cluster 3-27
Menu screen display 3-32
Selective Catalytic Reduction (SCR) exhaust treatment – Overview 3-37
CAB CONTROLS AND ADJUSTMENTS
Cab and platform – Control identification 3-48
LOADER ATTACHMENT CONTROLS
Loader attachment control lever 3-54
Loader attachment controls 3-55
Loader attachment – Operation 3-56
Detent position for loader control auxiliary hydraulics 3-59
BACKHOE ATTACHMENT CONTROLS
Remove the backhoe from the stowed position 3-61
Place the backhoe in the stowed position 3-67
Backhoe attachment mechanical controls version 3-73
Backhoe attachment hydraulic controls 3-83
CLIMATE CONTROLS
Heating and air-conditioning controls 3-89
Cab air louvers 3-93
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Before using the machine 4-1
Operating the machine 4-2
Run in period of a new machine 4-4
STARTING THE UNIT
Before starting the engine 4-5
Normal engine starting 4-6
Engine speed 4-7
Cold temperature operation 4-8
Hot temperature operation 4-10
Operating the machine in high altitude 4-11
Operating the machine in water 4-12
Assisted starting (Jump-starting) 4-13
STOPPING THE UNIT
Shutting down the engine 4-15
MOVING THE UNIT
Job site travel 4-16
Before operating the machine 4-18
Traveling on a hill 4-19
Auto powershift 4-20
Four-Wheel Drive (4WD) control switch (if equipped) 4-22
Differential lock button 4-23
Glide Ride™ – Two-Wheel Drive (2WD) only 4-24
Auto-Glide Ride™ (AGR) – Four-Wheel Drive (4WD) only 4-25
PARKING THE UNIT
Parking the machine 4-26
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Precautions for road travel 5-1
PREPARING FOR ROAD TRANSPORT
Preparing the machine for road travel 5-2
SHIPPING TRANSPORT
Transporting on a trailer 5-7
Lifting the machine 5-9
RECOVERY TRANSPORT
Towing the machine 5-10
6 WORKING OPERATIONS
GENERAL INFORMATION
Forward-Neutral-Reverse (F-N-R) shift sensitivity 6-1
Display brightness 6-2
Maximum throttle/Cold start idle 6-3
Throttle sensitivity 6-5
Auto engine shutdown time-out adjustment 6-6
Auto engine protection shutdown setting 6-9
Auto-Glide Ride™ (AGR) speed thresholds 6-11
LOADER ATTACHMENT
Personal safety 6-12
Job layout 6-13
Operating the loader attachment 6-14
Loader digging force 6-17
Loader attachment safety strut 6-18
Loader bucket Removal 6-21
Loader bucket Installation 6-22
Loader bucket with quick coupler (B95CTC) 6-23
Loader bucket with forks (optional) 6-25
Lifting loads with the loader attachment 6-27
BACKHOE ATTACHMENT
Personal safety 6-29
Basic instructions 6-29
Backhoe danger area 6-30
Swing lock 6-31
Basic instructions 6-32
Setting the backhoe attachment in working position – center pivot 6-33
Stabilizer pads 6-39
Operating the backhoe attachment 6-41
Backhoe bucket – Remove 6-47
Backhoe bucket – Install 6-48
Backhoe bucket – Digging angle 6-49
Ballasting 6-50
Lifting loads with backhoe attachment 6-53
7 MAINTENANCE
GENERAL INFORMATION
Maintenance safety 7-1
Fire extinguisher 7-4
Capacities – B95C, B95C LR, and B95C TC 7-5
Capacities – B110C 7-7
Engine hood 7-9
Fuel tank 7-10
General specification – Diesel fuel 7-10
General specification – Biodiesel fuels 7-11
Selective Catalytic Reduction (SCR) exhaust treatment – Basic instructions 7-13
Hydraulic oil 7-15
Recommended engine oil for operating temperature ranges 7-17
Organic Acid Technology (OAT) coolant 7-18
Diagnostic/Service tool port 7-20
Hydraulic diagnostic test ports 7-21
Work hours and intervals 7-23
MAINTENANCE CHART
Maintenance chart 7-24
At warning message display
Engine air filters 7-26
Hydraulic filter(s) 7-28
Fuel system water separator 7-30
Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA tank – Filling 7-32
Diesel Exhaust Fluid (DEF)/AdBlue®/ARLA tank – Drain fluid 7-33
Hydrocarbon management 7-35
Initial 10 hours
Wheels – Check 7-36
Every 10 hours
Checks at start-up and before each workshift (10 hours) 7-38
Working attachments — Loader attachment 7-39
Working attachments — Backhoe attachment 7-40
Windshield washer fluid level — Check 7-41
Engine oil level — Check 7-42
Engine coolant — Check 7-44
Radiator, oil cooler, and condenser — Check 7-45
Alternator — Check 7-46
Hydraulic oil level — Check 7-47
Hydraulic hoses, tubes, and fittings 7-49
Every 50 hours
Working attachments – greasing 7-50
Door hinges 7-51
Front axle trunnion 7-51
Front axle king pins 7-52
Seat and seat belt 7-53
Fuel pre-filter – draining condensation 7-54
Tire pressure 7-56
Every 250 hours
Drive shaft lubrication 7-60
Engine cooling system — Check 7-61
Fuel tank – Drain fluid 7-62
Hydraulic oil tank breather / filler cap – cleaning 7-63
Transmission oil level 7-64
Front axle breather (4WD) – Clean 7-65
Front axle and reduction gear oil level (4WD) 7-66
Front axle system – Check — (2WD) 7-68
Rear axle oil level – Check 7-69
Rear axle breather 7-70
Radiator and condenser – cleaning 7-71
Drive belts – check 7-73
Cab air filter 7-74
Heater and evaporator (Air-conditioning system) – Cleaning 7-77
Telescopic dipper 7-78
Battery terminals 7-79
Cab protection system 7-81
Every 500 hours
Engine oil and filter 7-84
Fuel filter 7-88
Fuel prefilter 7-89
Diesel Exhaust Fluid (DEF)/AdBlue® tank filler screen 7-91
Diesel Exhaust Fluid (DEF)/AdBlue® in-line filter 7-93
Every 1000 hours
Hydraulic oil filter 7-96
Hydraulic oil 7-98
Power shuttle transmission – Oil change 7-101
Power shuttle transmission – Oil filter replacement 7-103
Power shuttle transmission – Screen filter cleaning 7-105
Powershift transmission – Oil change 7-107
Powershift transmission – Oil filter replacement 7-109
Front axle fluid – Four-Wheel Drive (4WD) 7-111
Rear axle 7-113
Machine inspection and cleaning 7-114
Brake pedal lever – Greasing 7-115
Hydraulic cylinders 7-116
Alternator – check 7-117
Every 1500 hours of operation or annually
Engine breather filter 7-118
Every 3000 hours
Diesel Exhaust Fluid (DEF)/AdBlue® supply module filter 7-119
Every 4000 hours
Engine coolant 7-125
As required
Drive belt 7-127
Air-conditioning compressor drive belt 7-129
Turbocharger – Check 7-130
Fuel system bleeding 7-131
Wheels and tires 7-132
Hydraulic system – Release pressure 7-135
Bulbs 7-138
Fuses and relays – Powershift 7-140
Fuses and relays – Power shuttle 7-146
Telematics system fuses (if equipped) 7-152
Battery removal and installation 7-153
Telescopic dipper (if equipped) 7-155
Bucket teeth 7-156
Loader bucket – Self-leveling adjustment 7-157
Disable parking brake 7-159
STORAGE
Machine storage 7-161
Preparation for use after storage 7-162
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Troubleshooting 8-1
Engine – Troubleshooting 8-3
Starter motor – Troubleshooting 8-5
Alternator – Troubleshooting 8-6
Transmission – Troubleshooting 8-7
Axles – Troubleshooting 8-10
Steering system – Troubleshooting 8-13
Hydraulic systems – Troubleshooting 8-14
Loader attachment – Troubleshooting 8-15
Backhoe attachment – Troubleshooting 8-16
Swing – Troubleshooting 8-17
Hydraulic pump – Troubleshooting 8-18
Electrical systems – Troubleshooting 8-19
Cab – Troubleshooting 8-20
Air-conditioning system – Troubleshooting 8-21
ALARM(S)
Display screen messages 8-22
9 SPECIFICATIONS
Capacities – B95C, B95C LR, and B95C TC 9-1
Capacities – B110C 9-3
Engine 9-5
Powertrain 9-7
Brakes and controls – General specification 9-8
Hydraulics 9-9
Front counterweight 9-10
Noise and vibration levels 9-11
Buckets 9-12
Tires 9-13
Dimensions and performance 9-15
Dimensions and performance – 6 in 1 bucket 9-20
Backhoe attachment performance 9-21
Backhoe attachment lifting capacity 9-25
10 ACCESSORIES
Mechanical loader bucket quick coupler 10-1
Mechanical backhoe bucket quick coupler 10-2
Backhoe attachment auxiliary hydraulic tools 10-4
Hand held auxiliary hydraulic tools 10-5
Backhoe attachment safety valves 10-6
Reversible stabilizer pads 10-7
Telematics – Overview with New Holland FleetForce™ 10-8

Contact us: [email protected]

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V