New Holland E135BSR Tier 3 Crawler Excavator Operator’s Manual S2YH00003ZE04 – PDF DOWNLOAD

Description

New Holland E135BSR Tier 3 Crawler Excavator Operator’s Manual S2YH00003ZE04 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E135BSR Tier 3 Crawler Excavator Operator’s Manual S2YH00003ZE04 – PDF DOWNLOAD

GENERAL INFORMATION:
TO THE OWNER:
E135BSR CRAWLER EXCAVATOR:

• Your machine has been designed and built to the highest standards of quality. It conforms to all current safety
  regulations. The risk of accidents can never be completely excluded. That is why it is essential to observe
  elementary safety rules and cautions.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and
  maintenance so as to avoid the risk of injury while operating or servicing the machine.
• The standard attachments and tools of this machine are designed for earth moving and rehandling operations. If
  you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure that it is equipped to
  perform this type of work. The machine must be equipped with safety valves, a load handling chart corresponding
  to the type of machine and its attachment and a load fixing point. Comply with all legal requirements.
• Do not use this machine for any application or purpose other than those described in this manual. If the machine is
  to be used for work involving the use of special attachments, accessories or equipment, consult your New Holland
  Construction, LLC Dealer in order to make certain that any adaptations or modifications made are in keeping with
  the machine’s technical specifications and with prevailing safety requirements.
• Any modification or adaptation which is not approved by the manufacturer may invalidate the machine’s initial
  conformity with safety requirements.
• The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult
  your New Holland Construction, LLC Dealer.
• Do not operate or permit anyone to operate or service this machine until you or the other persons have read and
  understand the safety, operation, and maintenance instructions in this manual. Use only trained operators who
  have demonstrated the ability to operate and service this machine correctly and safely. All persons who will be
  operating this machine shall possess a valid local vehicle operating permit and/or other applicable local age work
  permit.
• The information in this manual is provided on the basis of information that was available at the time the manual was
  written. Settings, procedures, part numbers, software and other items can change. These changes can affect the
  service that is given to the machine. Ensure that you have complete and current information from you dealer before
  you start any machine operation. Always keep this manual in the operator’s compartment (in the seat back, behind
  the operator’s seat). Make sure it is complete and in good condition. If you wish to obtain additional copies, or
  copies in languages other than that of the country of use, consult your New Holland Construction, LLC Dealer. With
  experienced and trained technicians, your dealer can provide the best methods of repair and maintenance for your
  machine. Your dealer can give you assistance with approved service parts.

TABLE OF CONTENTS:

New Holland E135BSR Tier 3 Crawler Excavator Operator’s Manual S2YH00003ZE04 – PDF DOWNLOAD

CHAPTER 1
GENERAL INFORMATION
To the Owner 1-1
Right, Left, Front, and Rear of the Machine 1-2
Machine Components 1-3
Identification Numbers 1-4
CHAPTER2
SAFETY, DECALS, AND HAND SIGNALS
Table of Contents 2-1
Safety Rules 2-3
Operator Precautions 2-5
Decals 2-1 O
Hand Signals 2-26
CHAPTER3
INSTRUMENTS AND CONTROLS
Table of Contents 3-1
Operator Cab and Operator Seat 3-3
Machine Access Compartments and Doors 3-8
Operator’s Compartment Controls and Accessories 3-9
Operating Levers and Controls 3-39
CHAPTER4
OPERATING INSTRUCTIONS
Table of Contents 4-1
Before Operating the Machine 4-3
Operating the Machine 4-3
Starting and Stopping Machine Engine with Temperature above 0°C (32°F) 4-5
Starting and Stopping Machine Engine with Temperature below 0°C (32°F) 4-6
Machine Warm Up 4-7
Control Decal 4-9
Basic Operation of Hydraulic Controls 4-11
Practices to Improve Efficiency 4-19
Machine Operation in Adverse Weather Conditions 4-21
Bucket Selection Guide 4-22
Use of Optional Attachment 4-23
Transportation 4-38
Machine Storage 4-42
CHAPTERS
LUBRICATION, FILTERS, AND FLUIDS
Table of Contents 5-1
Fluids and Filters 5-3
Lubricant Specifications 5-5
CHAPTER 6
MAINTENANCE AND ADJUSTMENTS
Table of Contents 6-1
General Information 6-3
General Safety 6-4
Lubrication and Maintenance Quick Reference Chart 6-10
Daily Inspection and Maintenance 6-12
50 hour Maintenance:
100 hOUR mAINTENANCE
120 Hour Maintenance
250 Hour Maintenance
500 Hour Maintenance
1000 Hour Maintenance
2000 Hour Maintenance
5000 Hour Maintenance
Special Procedures
Maintenance for Nibbler/Breaker
Disabled Machine
CHAPTER 7
ELECTRICAL
Table of Contents 7-1
Electrical Components 7-3
Starting Machine Engine with Booster Cable 7-8
CHAPTERS
SPECIFICATIONS
Table of Contents 8-1
General Specifications 8-3
Performance Specifications 8-7
Lifting Capacities 8-9
Torque Specifications 8-12
CHAPTER 9
INDEX

Questions? Email us: [email protected]

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V