New Holland E175C E195C Crawler Excavator Operator’s Manual 47512221 – PDF DOWNLOAD

Description

New Holland E175C E195C Crawler Excavator Operator’s Manual 47512221 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E175C E195C Crawler Excavator Operator’s Manual 47512221 – PDF DOWNLOAD

GENERAL INFORMATION:
Note to the Owner:

Improper operation of this machine can cause injury or death. Before using this machine, make certain that every
operator:
■ Is instructed in safe and proper use of the machine.
■ Reads and understands the Manual(s) pertaining to the machine.
■ Reads and understands ALL Safety Decals on the machine.
■ Clears the area of other persons.
■ Learns and practises safe use of machine controls in a safe, clear area before operating this machine on a job site.

• It is your responsibility to observe pertinent laws and regulations and follow NEW HOLLAND CONSTRUCTION instructions on machine operation and maintenance.
• Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations.
• However, the risk of accidents can never be completely excluded. That is why it is essential to observe
  elementary safety rules and precautions.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine.
• The standard attachments and tools of this machine are designed to carry out all kinds of earthmoving and rehandling operations. If you want to use this machine to handle a load, make sure that it is designed to carry out this kind of work. For this type of application, the machine must be equipped with safety valves, an overload indicator, a load handling chart corresponding to the type of machine and its attachment and a load fixing point. All legal requirements must also be strictly observed.
• Do not use this machine for any application or purpose other than those described in this manual. If the machine is to
  be used for work involving the use of special attachments, accessories or equipment, consult your NEW HOLLAND
  CONSTRUCTION Dealer in order to make sure that any adaptations or modifications made are in keeping with the
  machine’s technical specifications and with prevailing safety requirements.
  Any modification or adaptation which is not approved by the manufacturer may invalidate the machine’s initial conformity with safety requirements.
• The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult
  your NEW HOLLAND CONSTRUCTION Dealer.

TABLE OF CONTENTS:

New Holland E175C E195C Crawler Excavator Operator’s Manual 47512221 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Intended use 1-2
Electromagnetic Compatibility (EMC) 1-2
Manual scope 1-3
Product identification 1-5
Machine orientation 1-7
Machine components 1-8
Selective catalytic reduction (SCR) system 1-9
2 SAFETY INFORMATION
Signal word definitions 2-1
Safety rules 2-2
Hand signals 2-30
Noise level 2-36
Vibration levels 2-37
Safety decals 2-38
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Cab 3-1
OPERATOR’S SEAT
Operator’s seat 3-4
Seat belt 3-6
FORWARD CONTROLS
Front console 3-7
Instrument cluster 3-10
Selective Catalytic Reduction (SCR) exhaust treatment – Overview 3-24
Rear view camera 3-28
RIGHT-HAND SIDE CONTROLS
Right-hand console 3-29
Radio 3-33
Climate control panel 3-36
REARWARD CONTROLS
Console – Operating 3-39
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Hydraulic oil level 4-1
Fuel level 4-2
Engine oil level 4-3
Engine coolant level 4-4
Windscreen washer tank 4-4
Fuel pre-filter 4-5
Selective catalytic reduction (SCR) system 4-6
STARTING THE UNIT
Starting the engine 4-7
Inspection after starting the engine 4-10
Engine warm up 4-10
Hydraulic oil warm up 4-11
STOPPING THE UNIT
Stopping the engine 4-12
PARKING THE UNIT
Parking the machine 4-13
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Frame – Load 5-1
SHIPPING TRANSPORT
Lifting the machine 5-4
6 WORKING OPERATIONS
GENERAL INFORMATION
Operating the controls 6-1
Machine travel 6-2
Attachment controls 6-3
Swing control 6-5
Practices to improve efficiency 6-6
Emergency boom lowering 6-8
Machine operation in adverse weather conditions 6-9
Towing the machine 6-10
7 MAINTENANCE
GENERAL INFORMATION
Foreword 7-1
Biodiesel fuel 7-2
Consumables 7-4
Capacities 7-4
Engine lubrication system – Maintenance Chart – Recommended operating temperature
range 7-5
Maintenance summary decal 7-6
MAINTENANCE CHART
Maintenance Chart 7-7
Within the first 50 hours
Break-in period 7-9
Bucket grease fittings 7-9
Attachment 7-9
Hydraulic oil return filters 7-9
Within the first 500 hours
Break-in period 7-10
Bucket grease fittings 7-10
Attachment 7-10
Swing reduction unit oil 7-10
Travel reduction unit oil 7-11
Every 250 hours
Hydraulic oil tank 7-12
Fuel tank 7-13
Travel reduction gears 7-14
Swing reduction gear 7-15
Bucket grease fittings 7-16
Cab outside air filter 7-17
Engine air filter: outer element 7-18
Tracks 7-19
Every 500 hours
Cab air recirculation filter 7-21
Engine oil and filter 7-22
DEF/AdBlue® in-line filter 7-24
Fuel filter 7-25
Swing bearing 7-26
Attachment 7-27
Every 1000 hours
Engine air filters 7-28
Hydraulic oil return filters 7-29
Fuel pre-filter 7-30
Blow-by filter 7-31
Hydraulic reservoir breather 7-32
Every 1500 hours
Belt – Replace 7-33
Every 2000 hours
Pilot line filter 7-34
Swing reduction gear 7-35
Travel reduction gears 7-36
Engine coolant 7-37
Every 3600 hours
DEF/AdBlue® supply module filter 7-39
Every 5000 hours
Hydraulic oil 7-40
Electrical system
Fuses and relays 7-42
8 SPECIFICATIONS
General specifications E175C — E195C 8-1
Consumables 8-2
Capacities 8-2
Digging data E175C 8-3
Digging data E195C 8-5
Dimensions and weights E175C 8-7
Dimensions and weights E195C 8-9
9 ACCESSORIES
Nibbler 9-1
Breaker 9-7
Hydraulic oil – breaker/nibbler 9-14
Rotation system 9-15
Loads handling 9-16
Biodegradable hydraulic oil 9-19
10 FORMS AND DECLARATIONS
Declaration of conformity 10-1

Need help? Contact: [email protected]

https://vimeo.com/730563502

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V