New Holland E18SR Excavators Operator’s Manual 87364381 – PDF DOWNLOAD

Description

New Holland E18SR Excavators Operator’s Manual 87364381 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E18SR Excavators Operator’s Manual 87364381 – PDF DOWNLOAD

GENERAL INFORMATION:
TO THE OWNER:
E SERIES COMPACT HYDRAULIC CRAWLER EXCAVATOR:

• Your machine has been designed and built to the highest standards of quality. It conforms to all current safety
  regulations. See Official documents. However, the risk of accidents can never be completely excluded. That is why
  it is essential to observe elementary safety rules and precautions.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and
  maintenance so as to avoid the risk of injury while operating or servicing the machine.
• The standard attachments and tools of this machine are designed to carry out all kinds of earthmoving and
  rehandling operations. If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure
  that it is designed to carry out this kind of work. For this type of application, the machine must be equipped with
  safety valves, an overload indicator, a load handling chart corresponding to the type of machine and its attachment
  and a load fixing point. All legal requirements must also be strictly observed.
• Do not use this machine for any application or purpose other than those described in this manual. If the machine is
  to be used for work involving the use of special attachments, accessories or equipment, consult your Dealer in
  order to make sure that any adaptations or modifications made are in keeping with the machine’s technical
  specifications and with prevailing safety requirements.
• Any modification or adaptation which is not approved by the manufacturer may invalidate the machine’s initial
  conformity with safety requirements.
• The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult
  your Dealer.
• Before permitting a new operator on this machine, make sure:
• That the operator has received the necessary training on how to operate the machine correctly and safely.
• That the operator has read and understood the instructions given in this manual.
• Always keep this manual in the operator’s compartment (in the seat back, behind the operator’s seat). Make sure it
  is always complete and in good condition. If you wish to obtain extra copies, or copies in languages other than that
  of the country of use, consult your Dealer.
• Your Dealer is at your disposal for any further information. He will also provide any after-sales service you may
  require, and genuine Case spare parts, your guarantee of quality and match.
• The terms Right-hand, Left-hand, Front, and Rear are used in this manual to indicate the sides as they are seen
  from the operator’s seat when the cab is over the idler wheels.
• The illustration shows the machine in normal TRAVEL position. In normal TRAVEL position, the cab is over the
  idler wheels. The travel reduction gears are at the rear of the upper structure.

TABLE OF CONTENTS:

New Holland E18SR Excavators Operator’s Manual 87364381 – PDF DOWNLOAD

CHAPTER 1
GENERAL INFORMATION
To the Owner 1-1
Right, Left, Front, and Rear of the Machine 1-2
Identification Numbers 1-3
CHAPTER 2
SAFETY, AND DECALS
Table of Contents 2-1
Safety Rules 2-3
Personal Safety 2-3
Safety Area 2-3
Utility Safety 2-4
Operator Precautions 2-4
safety Decals 2-9
CHAPTER 3
INSTRUMENTS AND CONTROLS
Table of Contents 3-1
MACHINE NOMENCLATURE 3-3
Steps and Access Handles 3-4
Operator’s Compartment Controls and Accessories 3-5
Instrument Panel 3-6
Switches 3-9
Control Levers 3-10
Access Covers and guards 3-16
Operator’s Seat Adjustment 3-17
Seat Belt 3-17
CHAPTER 4
OPERATING INSTRUCTIONS
Table of Contents 4-1
Before Operating the Machine 4-3
Operating the Machine 4-3
Run-In Period 4-4
Starting the engine 4-4
Bringing the Machine Up To Operating Temperature 4-6
Engine Operation 4-7
Stopping the Engine 4-7
Operating the Machine in Cold Weather 4-8
Operating the Machine in Hot Weather 4-8
Operation 4-8
Machine Travel 4-9
Hydraulic Breaker and Nibbler Operation 4-11
Transporting the Machine 4-13
Operating the Machine in Water 4-15
Parking the Machine 4-16
Operating the Machine on Sloping Ground 4-16
OPERATING THE MACHINE ON SOFT GROUND 4-17
Moving A Disabled Machine 4-17
Lowering the Attachment in the Event of a Machine Failure 4-17
PRACTICES TO IMPROVE EFFICIENCY 4-18
OPERATION WITH RUBBER TRACKS 4-20
Machine Storage 4-23
II Issued 03-07 Bur 87364381NA
CHAPTER 5
LUBRICATION, FILTERS, AND FLUIDS
Table of Contents 5-1
Servicing Instructions 5-3
Fluids and Lubricants 5-4
Daily Inspections 5-7
Lubrication and Maintenance Chart 5-8
Grease Fittings and Lubrication Points 5-10
Engine Oil 5-14
Cooling System 5-16
Fuel System 5-19
Releasing Pressure in the Hydraulic System 5-23
Hydraulic System 5-24
Air Filter 5-31
Travel Reduction Gears 5-32
CHAPTER 6
MAINTENANCE AND ADJUSTMENTS
Table of Contents 6-1
Tracks 6-3
CHANGING MACHINE WIDTH (CRAWLER FRAME WIDTH) 6-5
Checking the Condition of Rubber Tracks 6-7
Track Rollers and idlers 6-9
bucket tooth points and side cutters 6-10
Replacing a Bucket 6-11
Fan and alternator Drive Belt 6-13
Inspecting and Cleaning the Machine 6-13
Checking for Cylinder Leakage 6-13
Fire Extinguisher (Not Supplied) 6-14
Plastic and Resin Parts 6-14
Welding on the Machine 6-14
Metric Torque Specifications 6-15
CHAPTER 7
ELECTRICAL
Table of Contents 7-1
Alternator 7-3
Starter Motor 7-3
Fuses 7-3
Battery 7-4
Connecting A Booster Battery 7-6
Attachment Lamps 7-7
CHAPTER 8
SPECIFICATIONS
Table of Contents 8-1
Engine 8-3
Hydraulic Components 8-3
Speed and Gradeability 8-3
Boom Swing and Dozer Blade 8-3
Machine Overall Dimensions – ROPS Canopy 8-4
Working Range 8-5
CHAPTER 9
INDEX

Need help? Contact: [email protected]

https://vimeo.com/729866928

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V