New Holland E215B E245B Crawler Excavators ROPS Tier III OPERATOR’S MANUAL 84267568 – PDF DOWNLOAD

Description

New Holland E215B E245B Crawler Excavators ROPS Tier III OPERATOR’S MANUAL 84267568 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E215B E245B Crawler Excavators ROPS Tier III OPERATOR’S MANUAL 84267568 – PDF DOWNLOAD

GENERAL INFORMATION

• This manual is designed as a guide for the correct and safe use of the machinery and for its correct maintenance. Always following the rules in the manual guarantees the best performance, operating economy and a long life for the machine and also makes it possible to avoid the most common causes of accidents that may occur during work or maintenance operations. Read the manual carefully, paying special attention to the instructions regarding safety, operation and maintenance to prevent risks or injury during usage or when carrying out maintenance operations on the machine. Before handing the machine over to an operator, check that:
• • The operator has been properly trained in the correct and safe use of the machine.
• • Also make sure that the operator has read the instructions in this manual and that they understand them fully.
• Always keep this manual in the cab. Make sure that it is always intact and in good condition. Contact the Dealer for further copies or a translation into a different language from the country of use.
• The machine has been designed and constructed in accordance with the most rigorous standards of quality and in compliance with current safety regulations. Never use the machine for applications not included in the manual. If the machine needs to be used for work that involves the use of special equipment,
• accessories or instruments, consult the Dealer to make sure that any adaptations or modifications carried out comply with the technical specifications of the machine and with the safety standards. Any modification or adaptation that is not
• approved by the manufacturer may invalidate the original conformity of the machine to the safety requirements and the persons that carry out these unapproved modifications will be held responsible for the consequences

WARNING

The fuel system and the engine of the machine have been designed and constructed in accordance with emission standards in force. Any tampering by dealers, customers, operators or users is strictly prohibited by law. Failure to comply may result in fines, work expenses, the warranty no longer being valid, legal action and the possible confiscation of the machine until the work needed to restore it to its original condition has been carried out. The engine must be overhauled and/or repaired by a qualified technician. It is strictly prohibited to tamper with the calibration of any of the hydraulic system valves to prevent damage to the machine components and the consequent risk to personnel

TABLE OF CONTENTS:

New Holland E215B E245B Crawler Excavators ROPS Tier III OPERATOR’S MANUAL 84267568 – PDF DOWNLOAD

SUBJECT PAGE
1 – INTRODUCTION AND SAFETY PRECAUTIONS
General information 1-1
Introduction 1-2
Intended use 1-2
Identification data E215B – E245B 1-3
Main machine components E215B – E245B 1-4
Vibration to the operator 1-5
Noise level E215B – E245B 1-6
ROPS/FOPS cab protection structure 1-6
Safety precautions 1-7
Safety plates 1-43
2- MACHINE FAMILIARIZATION
Instrument and controls 2-2
Safety lever 2-3
Starter switch 2-3
Engine speed throttle 2-4
Hourmeter 2-4
Monitor 2-5
Location of the switches 2-16
Control levers 2-21
Horn 2-22
Power boost 2-22
Travel control pedals 2-23
Cigarette lighter 2-24
12 V socket 2-24
Internal ceiling light 2-24
Radio 2-25
Climate conditioner system 2-26
Cab 2-29
Door 2-29
Front windscreens and windows 2-30
Emergency exit 2-31
Operator’s compartment 2-32
Adjusting the seat 2-32
Heated seat (pneumatic type) 2-33
Seat belt 2-34
3 – OPERATING INSTRUCTIONS
Operating the machine 3-1
Hood and access covers 3-2
External visual inspection 3-3
Inspections prior to starting the engine 3-4
Engine oil 3-4
Engine cooling system 3-6
Hydraulic system oil 3-7
Fuel tank 3-8
Windscreen washer tank 3-10
Fuel pre-filter 3-10
Adjusting the operator’s seat 3-11
Adjusting the rear mirrors 3-11
Starting the engine 3-12
Starting the engine in normal conditions 3-12
Starting the engine in cold climates 3-13
Starting the engine using booster batteries 3-14
Stopping the engine 3-15
SUBJECT PAGE
Inspection after starting the engine 3-16
Warming up the machine 3-17
Operating the machine 3-19
Operational precautions 3-19
Machine controls plate 3-19
Travelling the machine 3-20
Steering the machine 3-21
Counter rotating the machine (spin turn) 3-21
Travel stop 3-21
Shifting the travel speed (1st, 2nd Speed) 3-22
Using the power boost (Boosting of the power) 3-22
Attachment controls 3-23
Swinging the turret 3-24
Practices to improve efficiency 3-25
Operating in mud or water 3-27
Towing the machine 3-28
Manual signals 3-29
Parking the machine 3-35
Objects handling operation 3-36
Emergency boom lowering procedure 3-39
Machine operation in adverse weather conditions 3-40
Desmantling of the machine 3-41
4 – MAINTENANCE
Generalities 4-2
Break-in 4-6
Machine lubrication and maintenance chart 4-7
After 250 hours of operation 4-8
After 500 hours of operation 4-27
After 1000 hours of operation 4-35
After 1500 hours of operation 4-38
After 2000 hours of operation 4-39
After 3000 hours of operation 4-49
After 5000 hours of operation 4-50
Maintenance to be performed when required 4-53
Filling chart E215B 4-56
Filling chart E245B 4-57
5 – TROUBLESHOOTING
Engine 5-1
Hydraulic system 5-4
6 – TRANSPORTATION
Road transport 6-1
Loading/unloading the machine 6-2
Securing the machine 6-5
Lifting machine 6-7
7 – OPTIONS AND VARIANTS
Hydraulic breaker 7-1
Crusher 7-6
Hydraulic oil and filter element service interval 7-10
Equipment rotation system 7-11
SUBJECT PAGE
8 – SPECIFICATIONS
Technical specifications E215B-E245B 8-1
Digging data E215B (Monoblock Version) 8-2
Digging data E215B (Triple Articulation Version) 8-3
Digging data E245B (Monoblock Version) 8-4
Digging data E245B (Triple Articulation Version) 8-5
Transporting dimensions E215B (Monoblock Version) 8-6
Transporting dimensions E215B (Triple Articulation Version) 8-7
Transporting dimensions E245B (Monoblock Version) 8-8
Transporting dimensions E245B (Triple Articulation Version) 8-9
Bucket applications as a function of the arms E215B 8-10
Bucket applications as a function of the arms E245B 8-11
9 – ELECTRICAL SYSTEM
Electrical system 9-1
Batteries 9-2
Fuses – relay 9-4

Customer Support: [email protected]

https://vimeo.com/730912549

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.m