New Holland E215C E245C Crawler Excavators Operator’s Manual 84553751 – PDF DOWNLOAD

Description

New Holland E215C E245C Crawler Excavators Operator’s Manual 84553751 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E215C E245C Crawler Excavators Operator’s Manual 84553751 – PDF DOWNLOAD

GENERAL INFORMATION:
Note to the Owner:

• This manual is designed as a guide for the correct and safe use of the machinery and for its correct maintenance.
• Always following the rules in the manual guarantees the best performance, operating economy and a long life for
  the machine and also makes it possible to avoid the most common causes of accidents that may occur during work
  or maintenance operations. Read the manual carefully, paying special attention to the instructions regarding safety,
  operation and maintenance to prevent risks or injury during usage or when carrying out maintenance operations on
  the machine.
  Before handing the machine over to an operator, check that:
  • The operator has been properly trained in the correct and safe use of the machine.
  • Also make sure that the operator has read the instructions in this manual and that they understand them fully.
• Always keep this manual in the cab. Make sure that it is always intact and in good condition. Contact the Dealer for
  further copies or a translation into a different language from the country of use.
• The machine has been designed and constructed in accordance with the most rigorous standards of quality and in
  compliance with current safety regulations. Never use the machine for applications not included in the manual. If the
  machine needs to be used for work that involves the use of special equipment, accessories or instruments, consult
  the Dealer to make sure that any adaptations or modifications carried out comply with the technical specifications of
  the machine and with the safety standards. Any modification or adaptation that is not approved by the manufacturer
  may invalidate the original conformity of the machine to the safety requirements and the persons that carry out these
  unapproved modifications will be held responsible for the consequences.

TABLE OF CONTENTS:

New Holland E215C E245C Crawler Excavators Operator’s Manual 84553751 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Product identification 1-3
Vibration levels 1-6
Noise level 1-7
Cab protection (ROPS and FOPS) 1-8
Biodiesel fuel – Biodiesel fuels 1-9
2 SAFETY INFORMATION
Safety rules 2-1
Safety decals 2-31
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Cab 3-1
OPERATOR’S SEAT
Operator’s seat 3-4
Seat belt 3-6
FORWARD CONTROLS
Front console 3-7
Instrument cluster 3-10
Rear view camera 3-24
RIGHT-HAND SIDE CONTROLS
Right-hand console 3-25
Radio 3-29
Climate control panel 3-32
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Hydraulic oil level 4-1
Fuel level 4-2
Engine oil level 4-3
Engine coolant level 4-4
Windscreen washer tank 4-4
Fuel pre-filter 4-5
STARTING THE UNIT
Starting the engine 4-6
Inspection after starting the engine 4-9
Engine warm up 4-9
Hydraulic oil warm up 4-10
STOPPING THE UNIT
Stopping the engine 4-11
PARKING THE UNIT
Parking the machine 4-12
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Transporting on a trailer 5-1
SHIPPING TRANSPORT
Lifting the machine 5-4
6 WORKING OPERATIONS
GENERAL INFORMATION
Booms, dippers, and buckets – Operating 6-1
Machine travel 6-2
Attachment controls 6-3
Swing control 6-4
Practices to improve efficiency 6-5
Hand signals 6-7
Emergency boom lowering 6-13
Machine operation in adverse weather conditions 6-14
Towing the machine 6-15
7 MAINTENANCE
GENERAL INFORMATION
Foreword 7-1
Maintenance summary decal (for Russian Federation and Turkey) 7-2
Maintenance summary decal (for Africa and Middle East) 7-3
Break-in period 7-4
MAINTENANCE CHART
Maintenance Chart 7-5
Every 250 hours
Hydraulic oil tank 7-6
Fuel tank 7-7
Travel reduction unit oil 7-8
Swing reduction unit oil 7-9
Bucket grease fittings 7-10
Cab outside air filter 7-11
Engine air filter: outer element 7-12
Tracks 7-13
Fuel filters 7-15
Fuel pre-filter 7-16
Every 500 hours
Cab air recirculation filter 7-17
Engine oil and filter 7-18
Swing bearing 7-19
Attachment 7-20
Every 1000 hours
Engine air filters 7-21
Hydraulic oil return filters 7-22
Hydraulic reservoir breather 7-23
Every 1500 hours
Fan and alternator drive belt 7-24
Every 2000 hours
Pilot line filter 7-25
Swing reduction unit oil 7-26
Travel reduction unit oil 7-27
Engine coolant 7-28
Every 5000 hours
Hydraulic oil 7-30
Electrical system
Fuses and relays 7-32
Fluids and lubricants
Fluids and lubricants E215C — E245C 7-35
8 SPECIFICATIONS
General specifications E215C — E245C 8-1
Digging data E215C 8-2
Digging data E245C 8-3
Dimensions and weights E215C 8-4
Dimensions and weights E245C 8-5
Buckets application as a function of the arm E215C 8-6
Buckets application as a function of the arm E245C 8-6
9 ACCESSORIES
Nibbler 9-1
Breaker 9-5
Hydraulic oil – breaker/nibbler 9-10
Rotation system 9-11
Loads handling 9-12
Biodegradable hydraulic oil 9-15
10 FORMS AND DECLARATIONS
Directives 10-1

Questions? Email us: [email protected]

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V