New Holland E215C EVO E245C EVO CRAWLER EXCAVATOR OPERATOR’S MANUAL 90420950 – PDF DOWNLOAD

Description

New Holland E215C EVO E245C EVO CRAWLER EXCAVATOR OPERATOR’S MANUAL 90420950 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E215C EVO E245C EVO CRAWLER EXCAVATOR OPERATOR’S MANUAL 90420950 – PDF DOWNLOAD

1 – GENERAL INFORMATION
Note to the Owner

• This manual has been developed as a guide for the safe and proper use of the machine, as well as for its maintenance.
  Always follow the recommendations contained in this manual to ensure the best performance, economic operation
  and long service life of the machine.
• The recommendations in this manual also allow you to prevent the most common
  causes of accidents that might occur during work or maintenance operations of the machine. Carefully read
  the manual, paying special attention to the instructions regarding safety, operation and maintenance, thus avoiding
  unnecessary risks or injury during use or when performing maintenance operations on the machine.

Before handing the machine over to an operator, check that:
• The operator is properly instructed on the correct and safe use of the machine.
• Make sure that the operator has read and understood the instructions contained in this manual.

Always keep this manual in the cab. Make sure that the manual is always intact and in good condition. To obtain

• The machine has been designed and manufactured according to the strictest quality standards and complies with the current safety regulations. Never use the machine for applications that are not included in this manual.
• If you have to use the machine with equipment, accessories or special instruments, see your dealer to ensure that any adjustments or changes implemented meet the machine’s technical specifications and the safety regulations.
• Any change or adaptation that is not approved and tested by the manufacturer could void the original compliance of the machine in relation to safety requirements, and the people who perform these unapproved modifications may be liable for the consequences.

ATTENTION:

• The engine and fuel system of the machine are designed and manufactured in accordance with government emissions regulations. Tampering by dealers, customers and operators is strictly prohibited by law.
• Failure to comply with this recommendation could result in government fines, rework costs, voided warranty, lawsuits, and possible confiscation of the machine until it is returned to its original design. Technical assistance to the engine and repairs must be done by a certified technician only.

Introduction

• Your NEW HOLLAND CONSTRUCTION excavator is a machine with hydraulic operation. It consists of a lower structure fitted with tracks and a swing bearing that supports the upper structure.
• The upper structure supports the implement, the engine, the hydraulic components, the cab, the fuel tank, and the counter weight. When the operator actuates the commands (pedals or levers), the hydraulic pumps, driven by the engine, suction
• the hydraulic fluid from the reservoir, sending it to the control valve, which then sends the fluid to perform the desired operation. A cooling system keeps the hydraulic fluid at normal operating temperature.

Read the operator’s manual
Important information

• Each machine is supplied with a copy of this manual.
• This manual has been developed as a guide for the safe and proper use of the machine, as well as for its maintenance.
Always follow the recommendations in this manual to ensure the best performance, cost-effective operation
and long service life of your machine.
• The manual is in sections. For a list of sections, see the table of contents. Refer to the index at the back of this
manual for locating specific items about your machine.
• The “SAFETY INFORMATION” chapter contains important information about safety at the time of maintenance,
adjustments and safe operation of the machine, and also contains information about the use of safety messages
found throughout this manual.
• The “MAINTENANCE” chapter contains important information about lubrication, cleaning work, maintenance and
adjustments of the machine.
• The “SPECIFICATIONS” chapter contains important information about weights, dimensions, torques, and general
specifications of the machine.
• The remaining chapters provide operating instructions for the machine, its controls, instruments, and accessories,
and information about transport, storage and operation of the machine.
• READ THIS MANUAL COMPLETELY and make sure that you have learned how to operate the machine and its
controls correctly and safely. It is your responsibility to read and understand the operator’s manual and other provided
information before you start to operate the machine. This information includes the speed, brakes, steering,
stability and load characteristics of the machine.
• Do not operate this machine or perform maintenance work if you have not had appropriate training. Read and fully
understand all the instructions and warnings in this manual. Have all operators read this manual carefully.
• If you follow the basic safety procedures and precautions, you can avoid most accidents that relate to machine
inspection and maintenance services.
• Always see the Operator’s Manual when you have doubts about any operating procedure of the machine. Read
and understand all the safety warnings contained in this manual and all the safety decals on the machine. Correctly
follow the maintenance procedures. See your Authorized NEW HOLLAND CONSTRUCTION Dealer if you have
any doubts.
• DO NOT remove this manual from the machine. Make sure this manual is complete and in good condition. Contact
an Authorized NEW HOLLAND CONSTRUCTION Dealer if you need additional manuals or manuals in other
languages. Always keep the manual in its compartment.
• Your machine is compliant with current safety regulations, but the safety information in this manual does not replace
safety rules, insurance requirements, and federal, state or local laws. Make sure that your machine has all the
appropriate and certified equipment in accordance with these government codes or laws. Consult an Authorized
NEW HOLLAND CONSTRUCTION Dealer about changes to your machine.
• NEW HOLLAND CONSTRUCTION reserves the right to improve designs and change specifications at any time,
without obligation to install them on previously sold units. The specifications, descriptions, and illustrative materials
here correctly reflect the data known on the publication date, but may vary by region and are subject to change
without notice. Therefore, all content in this publication is subject to production variations. These variations can
affect the maintenance that you perform on the machine. Make sure that your Authorized NEW HOLLAND CONSTRUCTION
Dealer has provided complete and current information before you start to operate any machine.
• The illustrations may include optional equipment and accessories, and may not include all standard equipment.
• Dimensions and weights in this manual are only approximate.
• Additional safety messages are used in the text of the manual to show specific safety hazards. Pay attention

TABLE OF CONTENTS:

New Holland E215C EVO E245C EVO CRAWLER EXCAVATOR OPERATOR’S MANUAL 90420950 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Read the operator’s manual 1-3
Electromagnetic interferance 1-5
Operator’s Manual storage on the machine 1-6
Identification Identification of the sides of the machine 1-7
Machine components 1-8
Identification plates 1-9
Vibration levels 1-11
Noise level 1-11
Ecology and environment 1-12
2 SAFETY INFORMATION
Safety rules 2-1
Safety rules (Signal word definitions) 2-2
Safety rules (Personnel) 2-3
Operating precautions (Starting the machine) 2-8
Operating precautions (Machine operation) 2-10
Safty Precautions (Weld works) 2-21
Protecting the electronic and electrical systems during welding or battery charging 2-23
Safty Precautions – Fuel handling 2-24
Fire and explosion prevention 2-25
Safty Precautions (Utility lines) 2-27
Safty Precautions (Movement of loads) 2-28
Safty Precautions (Machine transport) 2-30
Operating precautions (Stopping the machine) 2-31
Safty Precautions – (Machine service) 2-32
Roll Over Protection Structure (ROPS) 2-41
Hand signals 2-43
Safety Decals 2-49
3 CONTROLS AND INSTRUMENTS
Access to operator’s platform
Access to operator’s platform 3-1
Controls and accessories 3-3
Operator’s seat
Mechanical suspension seat 3-5
Air suspension seat (option) 3-8
Forward controls
Hand control levers and pedals 3-12
Windshield 3-16
Front lower window 3-17
Front right-hand console 3-18
System monitor / Function control panel 3-19
Monitor switches 3-25
Menu screen display 3-28
Clock adjustment 3-39
Left-hand side controls
Left-hand side controls 3-40
Control panel (Heating, ventilation and air conditioning) 3-41
Function cancellation lever and safety bar 3-46
Cab internal lighting 3-47
Emergency exit hammer 3-47
Sliding windows on door 3-47
Right-hand side controls
Right hand side controls 3-48
Radio 3-49
Right-hand console 3-56
Coat hanger hook 3-57
Cup holder 3-57
Rearward controls
Fuse box 3-58
Magazine rack 3-58
Refrigerated/heated compartment 3-59
Storage compartment 3-59
Overhead controls
Roof curtain 3-60
Sunroof 3-60
Sunshield (optional) 3-60
Exterior controls
Fuel reservoir 3-61
Rearview mirrors 3-62
Rear view camera (optional) 3-65
Storage compartment 3-65
Side doors 3-66
Electrical (Master switch) 3-67
Engine hood 3-68
Lower panels 3-69
Windshield washer resevoir 3-69
Safety valves (optional) 3-70
Optional tool supply valves (optional) 3-70
Fuel reservoir filling pump (if equipped) 3-71
4 OPERATING INSTRUCTIONS
Commissioning the unit
Before starting the engine 4-1
Break-in period 4-3
Starting the unit
Anti-theft protection 4-4
Starting the engine 4-7
Bringing the machine up to operating temperature 4-9
Engine operation 4-10
Machine operation – (Operating instructions) 4-11
Machine operation – (Hot or cold weather) 4-12
Stopping the unit
Stopping the engine 4-13
Moving the unit
Machine travel 4-14
Handling the machine 4-17
Load handling 4-19
Machine operation 4-21
Lowering the attachment in the event of a failure 4-23
Auxiliary hydraulic circuits 4-24
Parking the unit
Parking the machine 4-29
5 TRANSPORT OPERATIONS
Shipping transport
Transporting the machine 5-1
Tie downs for shipping 5-4
Unloading the machine from a transport trailer 5-6
Recovery transport
Towing 5-7
6 MAINTENANCE
General information
Maintenance and adjustments 6-1
Engine lubrication system 6-7
Engine coolant system 6-8
Organic Acid Technology (OAT) coolant 6-9
Fuel system 6-10
Engine air filter system 6-12
Hydraulic system 6-13
Releasing pressure in the hydraulic system 6-15
Air-conditioning system 6-17
Plastic and resin parts 6-18
Maintenance planning
Maintenance chart 6-19
AS REQUIRED
Fuel system (Bleed air) 6-21
Fuel reservoir filter (Cleaning) 6-22
Engine air pre filter – (if equipped) (Checking and cleaning) 6-23
Air-conditioning compressor drive belt (how to check the tension) 6-24
Tracks (Cleaning) 6-25
Tracks (Tension check and adjustment) 6-27
Cylinders (Checking) 6-29
Bucket teeth (Checking) 6-30
Bucket teeth (Replacement) 6-31
Bucket (Replacement) 6-37
Gas spring (Checking) 6-39
EVERY 10 HOURS OR DAILY
Pre-fuel filter (Draining) 6-41
Engine oil (Checking the level) 6-42
Engine coolant (Checking the level) 6-44
Hydraulic fluid (Checking the level) 6-45
Fuel reservoir (Water and sediment drainage) 6-46
Radiator and coolers (Checking) 6-47
Initial 50 hours
Tracks – Shoes (Checks and adjustment of torque in initial period) 6-48
Special torques (Check in initial period) 6-48
EVERY 50 HOURS OR WEEKLY
Cab air filter (Cleaning) 6-49
Lubrication points 6-51
First 250 hours
Pilot filter – Hydraulic fluid (Replacement in initial period) 6-53
Hydraulic fluid return filter (Replacement in initial period) 6-53
Swing reduction oil (Change in initial period) 6-53
Travel reduction oil (Change in initial period) 6-53
EVERY 250 HOURS
Fuel transfer pump (Checking) 6-54
Engine air filter (Verification and cleaning) 6-55
Engine air filter (Checking) 6-58
Hydraulics reservoir (Water and sediment drainage) 6-59
Swing reduction oil (Checking the level) 6-61
Travel reduction oil (Checking the level) 6-63
Tracks – Shoes (Check and adjust the torque) 6-65
Tracks – Rollers and tensioner wheels (Check) 6-67
Battery (Charge checks) 6-68
Battery electrolyte (Checking the level) 6-69
Special torques (Checking) 6-70
EVERY 500 HOURS
Pre-fuel filter (Replacement) 6-71
Fuel filter (Replacement) 6-72
Fuel feed pump filter (Cleaning) 6-73
Engine oil and filter (Replacement) 6-76
Air-conditioning refrigerant (Checking) 6-78
Radiator and coolers (Cleaning) 6-80
Crankcase ventilation filter (Replacement) 6-82
Lubrication points 6-84
EVERY 1000 HOURS
Engine air filter (Replacement) 6-86
Hydraulic breather filter (Replacement of the element) 6-89
Swing reduction oil (Changing) 6-91
Travel reduction oil (Changing) 6-93
Alternator (Checking) 6-95
Starter motor (Checking) 6-96
Lubrication points 6-97
EVERY 1500 HOURS
Fan and alternator drive belt (Replacement) 6-102
EVERY 2000 HOURS
Engine coolant (Changing) 6-104
Pilot filter – Hydraulic fluid (Check) 6-107
Hydraulic fluid return filter (Replacement) 6-109
Cab air filters (Replacement) 6-112
Lubrication points 6-114
EVERY 4000 HOURS
Engine valves (Checking clearance and adjustment) 6-115
EVERY 5000 HOURS
Hydraulic suction filter (Replacement or cleaning) 6-116
Hydraulic fluid (Changing) 6-118
Hydraulic components (Bleed) 6-120
Electrical
Fuses (Replacement) 6-122
Starting with auxiliary batteries 6-124
Battery (Replacement) 6-126
Bulbs (Replacement) 6-128
Storage
Preparation for storage 6-132
Periodic checks 6-133
Removal from storage 6-134
7 SPECIFICATIONS
Lubrication, Filters and Fluids 7-1
Specifications (Motor) 7-3
Specifications (Hydraulic system) 7-4
Specifications (Bucket) 7-5
General specification 7-6
Weights 7-8
Dimensions (Standard models) 7-9
Digging data 7-11
Torque specifications 7-13
8 ACCESSORIES
Fire extinguisher (if equipped) 8-1

Questions? Email us: [email protected]

https://vimeo.com/730920835

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.m