NEW HOLLAND E385B Crawler Excavator ROPS Tier III OPERATOR’S MANUAL 84268157- PDF DOWNLOAD

Description

NEW HOLLAND E385B Crawler Excavator ROPS Tier III OPERATOR’S MANUAL 84268157- PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

 DESCRIPTION:

NEW HOLLAND E385B Crawler Excavator ROPS Tier III OPERATOR’S MANUAL 84268157- PDF DOWNLOAD

GENERAL INFORMATION

• This manual is designed as a guide for the correct and safe use of the machinery and for its correct maintenance.
• Always following the rules in the manual guarantees the best performance, operating economy and a long life for the machine and also makes it possible to avoid the most common causes of accidents that may occur during work or maintenance operations
• Read the manual carefully, paying special attention to the instructions regarding safety, operation and maintenance to prevent risks or injury during usage or when carrying out maintenance operations on the machine. Before handing the machine over to an operator, check that:

• The operator has been properly trained in the correct and safe use of the machine.
• Also make sure that the operator has read the instructions in this manual and that they understand them fully.

• Always keep this manual in the cab. Make sure that it is always intact and in good condition.
• Contact the Dealer for further copies or a translation into a different language from the country of use.
• The machine has been designed and constructed in accordance with the most rigorous standards of quality and in compliance with current safety regulations.
• Never use the machine for applications not included in the manual.
• If the machine needs to be used for work that involves the use of special equipment, accessories or instruments, consult the Dealer to make sure that any adaptations or modifications carried out comply with the technical specifications of the machine and with the safety standards.
• Any modification or adaptation that is not approved by the manufacturer may invalidate the original conformity of the machine to the safety requirements and the persons that carry out these unapproved modifications will be held responsible for the consequences

TABLE OF CONTENTS:

NEW HOLLAND E385B Crawler Excavator ROPS Tier III OPERATOR’S MANUAL 84268157- PDF DOWNLOAD

SUBJECT PAGE
1 – INTRODUCTION AND SAFETY PRECAUTIONS
General information 1-1
Introduction 1-2
Intended use 1-2
Identification data 1-3
Main machine components 1-4
Vibration to the operator 1-5
Noise level 1-6
ROPS/FOPS cab protection structure 1-6
Safety precautions 1-7
Safety plates 1-43
2- MACHINE FAMILIARIZATION
Instrument and controls 2-2
Safety lever 2-3
Starter switch 2-3
Engine speed throttle 2-4
Hourmeter 2-4
Monitor 2-5
Location of the switches 2-16
Control levers 2-22
Horn 2-23
Power boost 2-23
Travel control pedals 2-24
Cigarette lighter 2-25
12 V socket 2-25
Internal ceiling light 2-25
Radio 2-26
Climate conditioner system 2-27
Cab 2-30
Door 2-30
Front windscreens and windows 2-31
Emergency exit 2-32
Operator’s compartment 2-33
Adjusting the seat 2-33
Heated seat (pneumatic type) 2-34
Seat belt 2-35
3 – OPERATING INSTRUCTIONS
Operating the machine 3-1
Hood and access covers 3-2
External visual inspection 3-3
Inspections prior to starting the engine 3-4
Engine oil 3-4
Engine cooling system 3-6
Engine belts 3-7
Hydraulic system oil 3-8
Fuel tank 3-9
Windscreen washer tank 3-11
Fuel filters 3-11
Adjusting the operator’s seat 3-13
Adjusting the rear mirrors 3-13
Starting the engine 3-14
Starting the engine in normal conditions 3-14
Starting the engine in cold climates 3-15
Starting the engine using booster batteries 3-16
Stopping the engine 3-17
SUBJECT PAGE
Inspection after starting the engine 3-18
Warming up the machine 3-19
Operating the machine 3-21
Operational precautions 3-21
Machine controls plate 3-21
Travelling the machine 3-22
Steering the machine 3-23
Counter rotating the machine (spin turn) 3-23
Travel stop 3-23
Shifting the travel speed (1st, 2nd Speed) 3-24
Using the power boost (Boosting of the power) 3-25
Attachment controls 3-25
Swinging the turret 3-26
Practices to improve efficiency 3-27
Operating in mud or water 3-29
Towing the machine 3-30
Manual signals 3-31
Parking the machine 3-37
Objects handling operation 3-38
Emergency boom lowering procedure 3-41
Machine operation in adverse weather conditions 3-42
Desmantling of the machine 3-43
4 – MAINTENANCE
Generalities 4-2
Break-in 4-6
Machine lubrication and maintenance chart 4-7
After 250 operating hours 4-8
After 500 operating hours 4-33
After 1000 operating hours 4-43
After 2000 operating hours 4-45
After 5000 operating hours 4-55
Maintenance to be performed when required 4-58
Filling chart 4-62
5 – TROUBLESHOOTING
Engine 5-1
Hydraulic system 5-4
6 – TRANSPORTATION
Road transport 6-1
Loading/unloading the machine 6-2
Securing the machine 6-5
Lifting machine 6-7
7 – OPTIONS AND VARIANTS
Hydraulic breaker 7-1
Crusher 7-6
Hydraulic oil and filter element service interval 7-10
Equipment rotation system 7-11
SUBJECT PAGE
8 – SPECIFICATIONS
Technical specifications 8-1
Digging data (Monoblock Version) 8-2
Digging data (Triple Articulation Version) 8-3
Digging data (BEH) 8-4
Transporting dimensions (Monoblock Version) 8-5
Transporting dimensions (Triple Articulation Version) 8-6
Transporting dimensions (BEH) 8-7
Bucket applications as a function of the arms 8-8
9 – ELECTRICAL SYSTEM
Electrical system 9-1
Batteries 9-2
Fuses – relay 9-4

Contact us: [email protected]

https://vimeo.com/731610418

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.M