New Holland E485C EVO E505C EVO Crawler Excavator Operator’s Manual 48027507 – PDF DOWNLOAD

Description

New Holland E485C EVO E505C EVO Crawler Excavator Operator’s Manual 48027507 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E485C EVO E505C EVO Crawler Excavator Operator’s Manual 48027507 – PDF DOWNLOAD

GENERAL INFORMATION:
Note to the Owner:
Improper operation of this machine can cause injury or death. Before using this machine, make certain that every
operator:
• Is instructed in safe and proper use of the machine.
• Reads and understands the Manual(s) pertaining to the machine.
• Reads and understands ALL Safety Decals on the machine.
• Clears the area of other persons.
• Learns and practices safe use of machine controls in a safe, clear area before operating this machine on a job site.

• It is your responsibility to observe pertinent laws and regulations and follow NEW HOLLAND CONSTRUCTION instructions on machine operation and maintenance.
• Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations.
• However, the risk of accidents can never be completely excluded. That is why it is essential to observe
  elementary safety rules and precautions.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance
  so as to avoid the risk of injury while operating or servicing the machine.
• The standard attachments and tools of this machine are designed to carry out all kinds of earthmoving and rehandling operations. If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure that it is designed to carry out this kind of work. For this type of application, the machine must be equipped with safety valves, a load handling chart corresponding to the type of machine and its attachment and a load fixing point. All legal requirements must also be strictly observed.
• Do not use this machine for any application or purpose other than those described in this manual. If the machine is to
  be used for work involving the use of special attachments, accessories or equipment, consult your NEW HOLLAND
  CONSTRUCTION Dealer in order to make sure that any adaptations or modifications made are in keeping with the
  machine’s technical specifications and with prevailing safety requirements.
• Any modification or adaptation which is not approved by the manufacturer may invalidate the machine’s initial conformity
  with safety requirements.
• The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult
  your NEW HOLLAND CONSTRUCTION Dealer.

TABLE OF CONTENTS:

New Holland E485C EVO E505C EVO Crawler Excavator Operator’s Manual 48027507 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Intended use 1-2
Electro-magnetic compatibility (EMC) 1-2
Product identification 1-3
Operator’s manual storage on the machine 1-5
Machine orientation 1-5
Machine components 1-6
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Safety rules 2-2
Ecology and the environment 2-10
Hand signals 2-11
Safety signs 2-15
3 CONTROLS AND INSTRUMENTS
Access to operator’s platform
Frame – Access/Exit 3-1
Position of the operator’s compartment controls and accessories 3-3
Operator’s seat
Mechanical suspension seat 3-5
Air suspension seat (option) 3-9
Forward controls
Hand control levers and pedals 3-13
Windshield 3-17
Front lower window 3-18
Front right-hand console 3-19
System display and function control panel 3-20
Monitor switches 3-25
Menu screen display 3-27
Clock adjustment 3-37
Left-hand side controls
Left-hand control arm 3-38
Gate lock lever and safety bar 3-40
Heating, ventilation or air-conditioning control 3-41
Cab internal lighting 3-45
Emergency exit hammer 3-45
Sliding windows on door 3-45
Right-hand side controls
Right-hand control arm 3-46
Cab radio 3-48
Right-hand console 3-51
Cup holder 3-51
Rearward controls
Fuse box 3-52
Magazine rack 3-52
Refrigerated/heated compartment 3-53
Storage compartment 3-53
Coat hanger hook 3-53
Overhead controls
Roof curtain 3-54
Roof hatch 3-54
Sun shield 3-54
Exterior controls
Fuel tank 3-55
Rear view mirrors 3-56
Rear view camera (optional) 3-58
Front storage box 3-58
Side doors 3-59
Battery master switch 3-60
Engine hood 3-61
Lower panels 3-62
Windshield washer reservoir 3-62
Safety valves (optional) 3-63
Optional tool supply valves (optional) 3-64
Fuel tank filler pump (if equipped) 3-65
4 OPERATING INSTRUCTIONS
Commissioning the unit
Cab – Operating 4-1
Break-in period 4-3
Starting the unit
Anti-theft protection 4-4
Starting the engine 4-7
Bringing the machine up to operating temperature 4-9
Engine operation 4-10
Operating the machine in hot or cold weather 4-11
Machine operation 4-12
Stopping the unit
Stopping the engine 4-13
Moving the unit
Machine travel 4-14
Handling the machine 4-17
Load handling 4-19
Operating the machine 4-21
Lowering the attachment in the event of a failure 4-23
Radiators and oil coolers dust removal 4-24
Auxiliary hydraulic circuits 4-26
Parking the unit
Parking the machine 4-31
5 TRANSPORT OPERATIONS
Preparing for road transport
Removal and installation of the counterweight 5-1
Product identification Divided Weight 5-3
Shipping transport
Loading the machine onto a transport trailer 5-5
Tie downs for shipping 5-8
Unloading the machine from a transport trailer 5-10
Recovery transport
Towing 5-11
6 MAINTENANCE
General information
Basic instructions 6-1
Fluids and lubricants 6-4
Engine oil recommended operating temperature range 6-8
Releasing pressure in the hydraulic system 6-9
Grease points 6-11
Levels 6-19
Engine 6-21
Cooling system 6-24
Fuel system 6-28
Hydraulic circuit 6-37
Air filter 6-46
Swing reduction gear 6-50
Travel reduction gears 6-52
Tracks 6-53
Track rollers and idler wheels 6-56
Radiator and coolers 6-57
Fan and alternator drive belt 6-59
Adjustment of engine valve rocker clearances 6-61
Fuel tank filter 6-61
Fire extinguisher (not supplied) 6-61
Protecting the Electrical/Electronic Systems During Charging or Welding 6-62
Machine inspection and cleaning 6-63
Checking the machine settings 6-63
Plastic and resin parts 6-63
Checking the cylinders for leaks 6-64
Tooth tip wear limits on the backhoe bucket 6-65
Replacing a backhoe bucket 6-66
Air conditioning 6-68
Gas spring inspection 6-72
Torque specifications 6-73
Fuses 6-74
Batteries 6-76
Alternator 6-80
Starter motor 6-80
Bulb replacement 6-81
Maintenance planning
Maintenance chart 6-84
Storage
Preparing for storage 6-86
Periodic checks 6-87
Starting up after storage 6-88
7 TROUBLESHOOTING
Fault code resolution
Engine troubleshooting 7-1
8 SPECIFICATIONS
Machine specifications 8-1
Fluids and lubricants 8-7
Dimensions 8-11
Weights 8-17
9 ACCESSORIES
Direct fit buckets 9-1

Contact us: [email protected]

https://vimeo.com/730713500

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V