New Holland E57C Mini Excavator Operator’s Manual 90436154 – PDF DOWNLOAD

Description

New Holland E57C Mini Excavator Operator’s Manual 90436154 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E57C Mini Excavator Operator’s Manual 90436154 – PDF DOWNLOAD

GENERAL INFORMATION:
Note to the Owner:

Improper operation of this machine can cause injury or death. Before using this machine, make certain that every
operator:
• Is instructed in safe and proper use of the machine.
• Reads and understands the Manual(s) pertaining to the machine.
• Reads and understands ALL Safety Decals on the machine.
• Clears the area of other persons.
• Learns and practices safe use of machine controls in a safe, clear area before operating this machine on a job site.

• It is your responsibility to observe pertinent laws and regulations and follow NEW HOLLAND CONSTRUCTION instructions on machine operation and maintenance.
• Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations.
• However, the risk of accidents can never be completely excluded. That is why it is essential to observe
  elementary safety rules and precautions.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine.
• The standard attachments and tools of this machine are designed to carry out earthmoving and rehandling operations.
• If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure that it is designed to
  carry out this kind of work. For this type of application, the machine must be equipped with safety valves, an overload
  indicator, a load handling chart corresponding to the type of machine and its attachment, and a load fixing point. All
  legal requirements must also be strictly observed.
• Do not use this machine for any application or purpose other than those described in this manual. If the machine is to
  be used for work involving the use of special attachments, accessories, or equipment, consult your NEW HOLLAND
  CONSTRUCTION Dealer in order to make sure that any adaptations or modifications made are in keeping with the
  machine’s technical specifications and with prevailing safety requirements.
  Any modification or adaptation which is not approved by NEW HOLLAND CONSTRUCTION may invalidate the machine’s initial conformity with safety requirements.
• The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult
  your NEW HOLLAND CONSTRUCTION Dealer.

TABLE OF CONTENTS:

New Holland E57C Mini Excavator Operator’s Manual 90436154 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Intended use 1-2
Electro-Magnetic Compatibility (EMC) 1-2
Telematics (optional) 1-2
Manual scope and required training level 1-3
Product identification 1-5
Operator’s manual storage on the machine 1-8
Machine orientation 1-9
Machine components 1-10
EC Declaration of Conformity 1-14
2 SAFETY INFORMATION
Signal word definitions 2-1
Safety rules 2-2
Ecology and environment 2-11
Hand signals 2-12
Noise emission 2-16
Vibration levels 2-17
Safety signs 2-18
3 CONTROLS AND INSTRUMENTS
Access to operator’s platform
Door and steps 3-1
Operator’s seat
Operator’s seat 3-3
Forward controls
Forward controls 3-6
Windshield 3-10
Left-hand side controls
Left-hand side controls 3-11
Safety lock lever 3-13
Heating, ventilation, or air-conditioning control 3-14
Radio 3-18
Emergency exit hammer 3-29
Right-hand side controls
Right-hand side controls 3-30
Engine speed control 3-35
Instrument cluster 3-36
Remote controller 3-88
Dozer blade control lever 3-93
Rearward controls
Battery disconnect switch 3-95
Storage compartment 3-96
Coat hanger hook 3-96
Sunshield 3-97
Overhead controls
Cab internal lighting 3-98
Exterior controls
Side doors 3-99
Windshield washer reservoir 3-100
Fuel tank 3-101
4 OPERATING INSTRUCTIONS
Starting the unit
Anti-theft protection 4-1
Starting the engine 4-3
Bringing the machine up to operating temperature 4-7
Operating the machine in hot or cold weather 4-8
Operating the machine 4-9
Lowering the attachment in the event of a failure 4-13
Bucket replacement 4-14
Caution while using rubber crawlers 4-15
Stopping the unit
Stopping the engine 4-19
Moving the unit
Machine travel 4-20
Parking the unit
Parking the machine 4-26
5 TRANSPORT OPERATIONS
Road transport
Loading the machine onto a transport trailer 5-1
Preparing for road transport
Tie downs for shipping 5-3
Unloading the machine from a transport trailer 5-4
Shipping transport
Handling the machine 5-5
Recovery transport
Towing the machine 5-7
6 MAINTENANCE
General information
Basic instructions 6-1
General specification – Diesel fuel 6-4
General specification – Biodiesel fuels 6-5
Fluids and lubricants 6-7
Engine oil recommended operating temperature range 6-11
Releasing pressure in the hydraulic system 6-12
Fuel system bleeding 6-19
Protecting the electronic and electrical systems during battery charging or welding 6-21
Maintenance planning
Maintenance chart 6-22
Break-in period
Engine oil and filter 6-24
Swing reduction gear 6-24
Swing reduction gear 6-24
Fuel filter 6-24
Hydraulic oil return filter 6-24
Pilot line filter 6-25
Travel reduction gears 6-25
Fuel filter water separator 6-25
Tightening torques 6-25
Grease points (Boom and arm) 6-25
Grease points (Bucket) 6-25
Grease points (Blade) 6-25
Every 10 hours
Engine oil level 6-27
Engine coolant level 6-28
Hydraulic oil level 6-29
Fuel filter water separator 6-30
Fan and alternator drive belt 6-32
Air-conditioning compressor drive belt 6-34
Every 50 hours
Grease points (Bucket) 6-35
Grease points (Blade) 6-36
Swing gear 6-38
Swing reduction gear 6-39
Track tension 6-40
Fuel tank 6-42
Every 100 hours
Fuel filter water separator 6-43
Every 250 hours
Grease points (Boom and arm) 6-44
Swing bearing 6-45
Grease points (Boom swing cylinder) 6-46
Battery 6-47
Tightening torques 6-54
Air conditioner filters 6-55
Every 500 hours
Engine oil and filter 6-57
Fuel filter water separator 6-58
Air cleaner 6-59
Fuel filter 6-61
Radiator and coolers 6-62
Travel reduction gears 6-63
Every 1000 hours
Swing reduction gear 6-64
Swing reduction gear 6-65
Hydraulic oil return filter 6-66
Oil reservoir breather 6-67
Pilot line filter 6-68
Travel reduction gears 6-69
Valve clearance 6-70
Every 1500 hours
Crankcase breather 6-71
Every 2000 hours
Hydraulic oil suction filter 6-72
Hydraulic hoses 6-73
Engine coolant 6-74
Air cleaner 6-76
Valve seat 6-77
Biodegradable hydraulic oil 6-78
Every 3000 hours
Exhaust Gas Recirculation (EGR) valve 6-80
Throttle valve 6-80
Fuel injectors 6-80
Every 5000 hours
Hydraulic oil 6-81
Every 6000 hours
Diesel Particulate Filter (DPF) – Soot Filter (SF) 6-83
When necessary
Cab and working lights 6-84
Diesel Particulate Filter (DPF) regeneration 6-87
Air-conditioning system filters 6-88
Control levers 6-88
Plastic and resin parts 6-88
Air-conditioning system 6-89
Fuse and relay locations
Fuses 6-92
Storage
Preparing for storage 6-94
Periodic checks 6-95
Starting up the machine after storage 6-96
7 TROUBLESHOOTING
Fault code resolution
Engine – Troubleshooting 7-1
Electrical systems – Troubleshooting 7-2
Other systems – Troubleshooting 7-3
8 SPECIFICATIONS
Machine specifications 8-1
Dimensions 8-4
Weights 8-6
9 ACCESSORIES
Direct fit buckets 9-1
Klac type buckets 9-3
Auxiliary hydraulic circuits 9-5
Hydraulic oil – breaker 9-22
Quick coupling system – Klac type 9-23
Load handling 9-33
Thumb bracket 9-36
Fuel tank filler pump 9-37
Rotating beacon 9-38

Customer Support: [email protected]

https://vimeo.com/730964261

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V