New Holland E60C Mini Excavator OPERATOR’S MANUAL 90436157 – PDF DOWNLOAD

Description

New Holland E60C Mini Excavator OPERATOR’S MANUAL 90436157 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E60C Mini Excavator OPERATOR’S MANUAL 90436157 – PDF DOWNLOAD

1 – GENERAL INFORMATION 
Note to the Owner

Improper operation of this machine can cause injury or death. Before using this machine, make certain that every
operator:
• Is instructed in safe and proper use of the machine.
• Reads and understands the Manual(s) pertaining to the machine.
• Reads and understands ALL Safety Decals on the machine.
• Clears the area of other persons.
• Learns and practices safe use of machine controls in a safe, clear area before operating this machine on a job site

• It is your responsibility to observe pertinent laws and regulations and follow NEW HOLLAND CONSTRUCTION instructions on machine operation and maintenance. Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. However, the risk of accidents can never be completely excluded.
• That is why it is essential to observe elementary safety rules and precautions. Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. The standard attachments and tools of this machine are designed to carry out earthmoving and
• rehandling operations. If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure that it is designed to carry out this kind of work. For this type of application, the machine must be equipped with safety valves, an overload indicator, a load handling chart corresponding to the type of machine and its attachment, and a load fixing point.
• All legal requirements must also be strictly observed. Do not use this machine for any application or purpose other than those described in this manual. If the machine is to be used for work involving the use of special attachments, accessories, or equipment, consult your NEW HOLLAND CONSTRUCTION Dealer in order to make sure that any adaptations or modifications made are in keeping with the machine’s technical specifications and with prevailing safety requirements. Any
• modification or adaptation which is not approved by NEW HOLLAND CONSTRUCTION may invalidate the machine’s initial conformity with safety requirements. The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult your NEW HOLLAND CONSTRUCTION Dealer. NOTICE: The engine and fuel system on your machine is designed and built to government emissions standards. Tampering by dealers, customers, operators and
• users is STRICTLY PROHIBITED BY LAW. Failure to comply could result in government fines, rework charges, invalid warranty, legal action and possible confiscation of the machine until rework to original condition is completed. Engine service and/or repairs must be done by a certified technician only. Your NEW HOLLAND CONSTRUCTION Dealer is at your
• disposal for any further information. They will also provide any after-sales service you may require, and genuine NEW HOLLAND CONSTRUCTION spare parts, your guarantee of quality and match. NEW HOLLAND CONSTRUCTION customer assistance is also available. Go to www.newholland.com You can obtain manuals on the operation, maintenance and repair
• of your machine from your NEW HOLLAND CONSTRUCTION Dealer. To ensure quick and efficient service, consult your NEW HOLLAND CONSTRUCTION Dealer for assistance in ordering the correct manuals for your machine. Always give the type and the Product Identification Number (PIN) of your machine so that your NEW HOLLAND CONSTRUCTION Dealer
• can supply you with the right manuals for your machine. NEW HOLLAND CONSTRUCTION reserves the right to make changes in the specification and design of the machine without prior notice and without incurring any obligation to modify units previously sold.

TABLE OF CONTENTS:

New Holland E60C Mini Excavator OPERATOR’S MANUAL 90436157 – PDF DOWNLOAD

GENERAL INFORMATION 9
Note to the Owner 9
Intended use 10
Electro-Magnetic Compatibility (EMC) 10
Telematics (optional) 10
Manual scope and required training level 11
Product identification 13
Operator’s manual storage on the machine 16
Machine orientation 17
Machine components 18
EC Declaration of Conformity 22
SAFETY INFORMATION 25
Signal word definitions 25
Safety rules 26
Ecology and environment 35
Hand signals 36
Noise emission 40
Vibration levels 41
Safety signs 42
CONTROLS AND INSTRUMENTS 61
Access to operator’s platform 61
Door and steps 61
Operator’s seat 63
Operator’s seat 63
Forward controls 66
Forward controls 66
Windshield 70
Left-hand side controls 71
Left-hand side controls 71
Safety lock lever 73
Heating, ventilation, or air-conditioning control 74
Emergency exit hammer 78
Right-hand side controls 79
Right-hand side controls 79
Engine speed control 84
Instrument cluster 85
Remote controller137
Dozer blade control lever142
Rearward controls144
Battery disconnect switch144
Storage compartment145
Coat hanger hook145
Radio146
Sunshield157
Overhead controls158
Cab internal lighting158
Exterior controls159
Side doors159
Windshield washer reservoir160
Cab tilting161
Fuel tank163
OPERATING INSTRUCTIONS165
Starting the unit165
Anti-theft protection165
Starting the engine167
Bringing the machine up to operating temperature171
Operating the machine in hot or cold weather172
Operating the machine173
Lowering the attachment in the event of a failure177
Bucket replacement178
Caution while using rubber crawlers179
Stopping the unit183
Stopping the engine183
Moving the unit184
Machine travel184
Parking the unit190
Parking the machine190
TRANSPORT OPERATIONS193
Road transport193
Loading the machine onto a transport trailer193
Preparing for road transport195
Tie downs for shipping195
Unloading the machine from a transport trailer196
Shipping transport197
Handling the machine197
Recovery transport199
Towing the machine199
MAINTENANCE201
General information201
Basic instructions201
General specification – Diesel fuel 204
General specification – Biodiesel fuels205
Fluids and lubricants207
Engine oil recommended operating temperature range211
Releasing pressure in the hydraulic system212
Fuel system bleeding218
Protecting the electronic and electrical systems during battery charging or welding220
Maintenance planning221
Maintenance chart221
Break-in period223
Grease points (Bucket) 223
Grease points (Boom and arm) 223
Grease points (Blade) 223
Engine oil and filter223
Fuel filter223
Hydraulic oil return filter224
Pilot line filter224
Travel reduction gears224
Fuel filter water separator224
Tightening torques224
Every 10 hours225
Engine oil level225
Engine coolant level226
Hydraulic oil level227
Fuel filter water separator228
Fan and alternator drive belt230
Air-conditioning compressor drive belt232
Every 50 hours233
Grease points (Bucket) 233
Grease points (Blade) 234
Swing ring gear 236
Track tension237
Fuel tank239
Every 100 hours240
Fuel filter water separator240
Every 250 hours241
Grease points (Boom and arm) 241
Swing bearing242
Grease points (Boom swing cylinder) 243
Battery244
Tightening torques248
Air conditioner filters249
Every 500 hours251
Engine oil and filter251
Fuel filter water separator252
Air cleaner253
Fuel filter255
Radiator and coolers256
Travel reduction gears257
Every 1000 hours258
Hydraulic oil return filter258
Oil reservoir breather259
Pilot line filter260
Travel reduction gears261
Valve clearance261
Every 1500 hours262
Crankcase breather262
Every 2000 hours263
Hydraulic oil suction filter263
Hydraulic hoses264
Engine coolant265
Air cleaner267
Valve seat268
Biodegradable hydraulic oil269
Every 3000 hours271
Exhaust Gas Recirculation (EGR) valve271
Throttle valve271
Fuel injectors271
Every 5000 hours272
Hydraulic oil272
Every 6000 hours274
Diesel Particulate Filter (DPF) – SF filter 274
When necessary275
Cab and working lights275
Diesel Particulate Filter (DPF) regeneration279
Air-conditioning system filters280
Control levers280
Plastic and resin parts280
Air-conditioning system281
Fuse and relay locations285
Fuses285
Storage287
Preparing for storage287
Periodic checks288
Starting up the machine after storage289
TROUBLESHOOTING291
Fault code resolution291
Engine – Troubleshooting291
Electrical systems – Troubleshooting292
Machine Control Unit (MCU) – Troubleshooting293
Other systems – Troubleshooting293
SPECIFICATIONS295
Machine specifications295
Dimensions298
Weights300
ACCESSORIES301
Direct fit buckets301
Klac type buckets303
Auxiliary hydraulic circuits305
Hydraulic oil – breaker322
Quick coupling system – Klac type 323
Load handling333
Thumb bracket336
Fuel tank filler pump337
Rotating beacon338
Fire extinguisher339

Contact us: [email protected]

https://vimeo.com/730940823

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.m