New Holland E80MSR Excavators Operation and Maintenance Instruction Manual 604.21.517.00 – PDF DOWNLOAD

Description

New Holland E80MSR Excavators Operation and Maintenance Instruction Manual 604.21.517.00 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland E80MSR Excavators Operation and Maintenance Instruction Manual 604.21.517.00 – PDF DOWNLOAD

FOREWORD
WARNING

• READ, UNDERSTAND AND FOLLOW ALL SAFETY PRECAUTIONS AND PROCEDURES FOUND IN THIS MANUAL BEFORE ATTEMPTING ANY OPERATION, INSPECTION OR MAINTENANCE OF THIS MACHINE, ATTACHMENT OR SYSTEMS.
• MANUFACTURER CANNOT ANTICIPATE EVERY POSSIBLE CIRCUMSTANCE THAT MIGHT INVOLVE A POTENTIAL HAZARD.
• THE WARNINGS IN THIS PUBLICATION AND ON THE PRODUCT ARE THEREFORE NOT ALL INCLUSIVE. IF A TOOL, PROCEDURE, WORK METHOD OR OPERATING TECHNIQUE NOT SPECIFICALLY RECOMMENDED BY MANUFACTURER IS USED, YOU MUST SATISFY YOURSELF THAT IT IS SAFE FOR YOU AND OTHERS.
• YOU SHOULD ALSO ENSURE THAT THE PRODUCT WILL NOT BE DAMAGED OR MADE UNSAFE BY THE OPERATION, LUBRICATION, MAINTENANCE AND/OR REPAIR PROCEDURES YOU CHOOSE.

GENERAL
• This manual contains procedures to help the operator gain peak performance through effective, economical machine
operation and maintenance for the Manufacturer’s Hydraulic Excavators.
• Before operating the machine, operators must thoroughly read and understand all Safety, Operation and Maintenance
instructions found in this manual. Failure to follow the instructions given in this manual may lead to serious
injury to persons and or equipment failure.
• Operators and persons working with this machine should continually study this manual until proper Safety, Operation
and Maintenance procedures are completely understood.
• This manual describes the basic operating techniques. Skill is gained as the operator utilizes these techniques
and perfects them with an actual machine.
• Some illustrated pictures may be different from your machine, as technical improvement is continuous, manuals
are periodically updated to reflect these changes.
• This manual may not contain attachments and optional equipment that are available in your area. Please contact
an authorized Dealer for any optional attachments required.
• Materials and specifications are subject to change without notice.

GENERAL SAFETY INFORMATION
WARNING

1. Most accidents, which occur during operation, are due by all persons working with the machine. to neglect of
precautionary measures and safety rules. Sufficient care should be taken to avoid these accidents. Erroneous
operation, lubrication or maintenance services are very dangerous and may cause injury or death of personnel.
Therefore all precautionary measures, NOTES, DANGERS, WARNINGS and CAUTIONS contained in this manual
and on the machine should be read and understood by all personnel before starting any work with or on the
machine.
2. Operation, inspection, and maintenance should be carefully carried out, and safety must be given the first priority.
Messages of safety are indicated with marks. The safety information contained in this manual is intended
only for supplement safety codes, insurance requirements, local laws, rules and regulations.
3. Messages of safety appear in this manual and on the machine. All messages of safety are identified by the words
“DANGER”, “WARNING” and “CAUTION”.

TABLE OF CONTENTS:

New Holland E80MSR Excavators Operation and Maintenance Instruction Manual 604.21.517.00 – PDF DOWNLOAD

6042151700_couv 1
6042151700_int_A4N 2
FOREWORD 6
1 SAFETY PRECAUTIONS 6
171 NOTICE FOR WARNING LABELS & DECALS 1 -20 6
172 LOCATION OF WARNING LABELS & DECALS 1 -20 6
2 MACHINE FAMILIARIZATION 6
241 RIGHT HAND OPERATOR CONSOLE 2 -5 6
242 LEFT HAND OPERATOR CONSOLE 2 -10 6
243 REAR PANEL AND OTHERS 2 -15 6
244 OPERATING LEVERS AND CONTROLS 2 -16 6
245 GAUGE CLUSTER 2 -21 6
246 OPERATOR CAB AND OPERATOR SEAT 2 -23 6
247 MACHINE ACCESS PANELS AND DOORS 2 -28 6
3 BASIC MACHINE OPERATION 6
321 STARTING ENGINE 3 -3 6
322 STOPPING ENGINE – NORMAL CONDITIONS 3 -4 6
323 EMERGENCY ENGINE SHUT DOWN 3 -4 7
331 STARTING ENGINE 3 -5 7
332 STOPPING ENGINE – NORMAL CONDITIONS 3 -6 7
333 EMERGENCY ENGINE SHUT DOWN 3 -6 7
341 CONNECTING BOOSTER CABLES 3 -7 7
342 STARTING BOOSTING MACHINE ENGINE 3 -8 7
343 STARTING DISABLED MACHINE ENGINE 3 -8 7
344 DISCONNECTING BOOSTER CABLES 3 -8 7
351 ENGINE 3 -9 7
352 HYDRAULIC OIL 3 -9 7
353 HYDRAULIC OIL IN FRIGID 3 -10 7
361 OPERATING PATTERN 3 -11 7
362 OPERATING PATTERN DECAL 3 -11 7
371 SAFETY LOCK LEVER 3 -12 7
372 KPSS (KOBELCO POWER SENSING SYSTEM) WORK MODE SWITCH 3 -13 7
373 MACHINE TRAVEL CONTROLS 3 -14 7
374 MACHINE ATTACHMENT & SLEWING CONTROLS 3 -17 7
375 USING AUTO ACCELERATION 3 -22 7
376 TOWING THE MACHINE 3 -22 7
391 SELECTION OF THE HYDRAULIC BREAKER 3 -27 7
392 BEFORE OPERATING THE HYDRAULIC BREAKER 3 -27 7
393 HYDRAULIC OIL LEVEL CHECK AND CONTAMINATION PREVENTION 3 -27 7
394 BASIC OPERATION 3 -27 7
395 BREAKER AND NIBBLER SELECTOR SWITCH 3 -28 7
396 CONTROL PEDAL 3 -28 7
397 SETTING SELECTOR VALVE 3 -29 7
398 SETTING STOP VALVE 3 -29 7
3111 REPLACEMENT SCHEDULE 3 -32 7
3112 REINFORCEMENT OF ATTACHMENT 3 -32 7
3131 PROPER USAGE 3 -34 8
3132 PROHIBITED WORK 3 -34 8
3133 CAUTIONS ON USAGE 3 -36 8
3134 INSPECTING RUBBER SHOE 3 -38 8
3135 ADJUSTING THE RUBBER SHOE TENSION 3 -39 8
4 MAINTENANCE 8
441 REQUIRED FLUIDS AND QUANTITIES 4 -11 8
442 REQUIRED FILTERS 4 -11 8
443 FLUIDS AND LUBRICANTS 4 -12 8
444 LUBRICANT SPECIFICATIONS 4 -13 8
451 ENGINE OIL LEVEL 4 -14 8
452 ENGINE COOLANT LEVEL 4 -14 8
453 ENGINE FLUID LEAKS 4 -15 8
454 FAN BELT WEAR AND TENSION 4 -15 8
455 FUEL LEVEL 4 -16 8
456 AIR CLEANER 4 -17 8
457 ENGINE ELECTRICAL 4 -18 8
458 HYDRAULIC OIL LEVEL 4 -18 8
459 BOOM SWING FUNCTIONS 4 -20 8
4510 HYDRAULIC FUNCTIONS 4 -20 8
4511 HYDRAULIC OIL LEAKS 4 -20 8
4512 MACHINE ELECTRICAL 4 -21 8
4513 STEPS AND HANDRAILS 4 -21 8
4514 FRAME STRUCTURE 4 -21 8
4515 TRACKS AND COMPONENTS 4 -22 8
4516 TRACK TENSION 4 -24 8
4517 BOOM AND ARM 4 -25 8
4518 BLADE, CUTTING EDGE, BUCKET TEETH & SIDE CUTTERS 4 -25 8
461 CHANGING ENGINE OIL AND/OR FILTER 4 -26 9
462 FUEL TANK DRAIN 4 -28 9
463 WATER SEPARATOR 4 -29 9
464 AIR INTAKE SYSTEM 4 -29 9
465 RADIATOR, OIL COOLER AND DEBRIS SCREEN 4 -30 9
466 HYDRAULIC RETURN FILTERS 4 -31 9
467 BATTERIES 4 -32 9
471 ATTACHMENT LUBRICATION 4 -34 9
472 DOZER BLADE LUBRICATION 4 -34 9
473 REPLACEMENT OF CUTTING EDGE (OPT) 4 -35 9
481 SLEWING MOTOR REDUCTION OIL 4 -36 9
482 TRAVEL MOTORS REDUCTION OIL 4 -37 9
491 ATTACHMENT LUBRICATION 4 -38 9
492 BOOM SWING LUBRICATION 4 -39 9
493 SLEWING REDUCTION LUBRICATION 4 -39 9
494 AIR CONDITIONER FILTERS 4 -39 9
495 INSPECTING COUNTERWEIGHT ATTACHING BOLTS FOR LOOSENING 4 -40 9
496 BELT TENSIONER (FAN & AIR CONDITIONER) 4 -41 9
4101 ENGINE OIL AND FILTER ELEMENT 4 -42 9
4102 FUEL FILTER 4 -44 9
4103 BLEEDING AIR FROM THE FUEL SYSTEM 4 -45 9
4104 BLEEDING AIR IN FUEL SYSTEM (AUTO AIR BLEEDING DEVICE / OPTION) 4 -45 9
4105 GREASING THE SLEWING RING 4 -46 9
4106 CHECKING SLEWING RING FITTING BOLTS FOR LOOSENING 4 -46 9
4107 FUEL SYSTEM INJECTION PRESSURE AND NOZZLE CONDITION (ATOMIZATION) 4 -46 9
4108 CHECKING THE AIR CONDITIONER REFRIGERANT 4 -47 9
4111 ENGINE VALVE CLEARANCE 4 -48 9
4112 ENGINE COMPRESSION PRESSURE 4 -48 9
4113 INSPECTION OF STARTER AND ALTERNATOR 4 -48 9
4114 ENGINE FUEL INJECTION TIMING 4 -48 9
4121 CHANGE ENGINE COOLANT 4 -49 10
4122 CHANGE HYDRAULIC OIL 4 -51 10
4123 CHANGE OIL IN TRAVEL MOTOR REDUCTION UNITS 4 -53 10
4124 CHANGE OIL IN SLEWING REDUCTION UNIT 4 -54 10
4125 CHANGE GREASE IN SLEWING RING GREASE BATH 4 -55 10
4126 HYDRAULIC TANK BREATHER 4 -55 10
4127 ATTACHMENT AND DUST SEALS 4 -56 10
4128 WINDSHIELD WASHER RESERVOIR 4 -58 10
4131 FUSES 4 -59 10
4132 PERIODICAL INSPECTION ITEMS 4 -60 10
4133 MACHINE STORAGE 4 -64 10
4134 CARE DURING STORAGE 4 -64 10
4135 REMOVING MACHINE FROM STORAGE 4 -64 10
5 TRANSPORTATION 10
511 MACHINE PREPARATION 5 -3 10
512 LOADING THE MACHINE 5 -4 10
513 SECURING MACHINE TO TRAILER 5 -6 10
541 MACHINE WITH ATTACHMENTS 5 -10 10
542 BOOM WITH ARM CYLINDER 5 -11 10
543 ARM WITH BUCKET CYLINDER 5 -11 10
544 ARM WITH BUCKET CYLINDER AND BUCKET 5 -11 10
545 DOZER BLADE 5 -12 10
546 BUCKET 5 -12 10
6 SPECIFICATIONS 10
611 MACHINE DIMENSIONS 6 -3 10
612 DOZER BLADE SPECIFICATIONS 6 -4 10
613 WORKING WEIGHTS 6 -4 10
614 STANDARD WORKING RANGES 6 -5 10
615 BOOM 6 -6 10
616 ARM 6 -6 10
617 SHOES 6 -6 11
618 PERFORMANCE SPECIFICATIONS 6 -7 11
619 MACHINE AND COMPONENT WEIGHTS 6 -9 11
6110 LIFTING CAPACITIES 6 -10 11
6111 LIFTING CAPACITIES 6 -11 11
6112 LIFTING CAPACITIES 6 -12 11
621 WORKING RANGES 6 -13 11
622 BUCKET AND ARM COMBINATIONS 6 -14 11
631 CAPSCREWS AND NUTS 6 -15 11
632 ORS JOINT (“O”-RING SEALING TYPE) 6 -16 11
633 NUTS AND SLEEVES 6 -17 11
634 FLARE TYPE FITTING JOINTS 6 -17 11
635 N2 (NYLON) TUBE FITTING JOINTS 6 -17 11
636 TORQUE VALUES FOR MOST COMMON BOLTS 6 -18 11
641 TEMPERATURE TABLE 6 -19 11
642 SPECIAL PIPE WRENCHES 6 -19 11
643 WEIGHT OF MATERIALS TABLE 6 -20 11
644 CAPS AND PLUGS FOR TUBES AND HOSE FITTINGS 6 -20 11
7 TROUBLESHOOTING 11
8 SPECIAL PROCEDURES 11
821 TOOLS AND EQUIPMENT REQUIRED 8 -3 11
822 PROCEDURES 8 -3 11
831 HOW TO LOWER ATTACHMENT 8 -7 11
832 HOW TO LOWER ATTACHMENT 8 -8 11
851 TOOLS & EQUIPMENT REQUIRED 8 -9 11
852 PROCEDURES 8 -9 11
FOREWORD 12
GENERAL 12
PERIODIC INSPECTIONS 12
NOTICE 12
1 SAFETY PRECAUTIONS 14
11 GENERAL SAFETY INFORMATION 16
12 SAFETY PRECAUTIONS 17
13 PRE-START SAFETY 20
14 SAFETY DURING OPERATION 24
15 INSPECTION & MAINTENANCE SAFETY 28
16 BATTERY SAFETY 31
17 WARNING LABELS & DECALS 33
171 NOTICE FOR WARNING LABELS & DECALS 33
172 LOCATION OF WARNING LABELS & DECALS 33
18 PROHIBITED MACHINE OPERATION 43
19 END OF WORK SHIFT SAFETY 45
110 USE FOPS AND FRONT GUARD 46
111 USE SAFETY VALVE AND OVERLOAD ALARM 47
2 MACHINE FAMILIARIZATION 48
21 FAMILIARIZATION 50
22 GENERAL MACHINE NOMENCLATURE 50
23 OPERATOR CAB NOMENCLATURE 51
24 COMPONENT & CONTROLS NOMENCLATURE 52
241 RIGHT HAND OPERATOR CONSOLE 52
242 LEFT HAND OPERATOR CONSOLE 57
243 REAR PANEL AND OTHERS 62
244 OPERATING LEVERS AND CONTROLS 63
245 GAUGE CLUSTER 68
246 OPERATOR CAB AND OPERATOR SEAT 70
247 MACHINE ACCESS PANELS AND DOORS 75
3 BASIC MACHINE OPERATION 78
31 PRE-START CHECK 80
32 STARTING & STOPPING MACHINE ENGINE WITH TEMPERATURE ABOVE 0C (32F) 80
321 STARTING ENGINE 80
322 STOPPING ENGINE – NORMAL CONDITIONS 81
323 EMERGENCY ENGINE SHUT DOWN 81
33 STARTING & STOPPING MACHINE ENGINE WITH TEMPERATURE BELOW 0ºC (32ºF) 82
331 STARTING ENGINE 82
332 STOPPING ENGINE – NORMAL CONDITIONS 83
333 EMERGENCY ENGINE SHUT DOWN 83
34 STARTING MACHINE ENGINE WITH BOOSTER CABLES 84
341 CONNECTING BOOSTER CABLES 84
342 STARTING BOOSTING MACHINE ENGINE 85
343 STARTING DISABLED MACHINE ENGINE 85
344 DISCONNECTING BOOSTER CABLES 85
35 MACHINE WARM UP 86
351 ENGINE 86
352 HYDRAULIC OIL 86
353 HYDRAULIC OIL IN FRIGID TEMPERATURES 87
36 CONTROLS DECAL 88
361 OPERATING PATTERN 88
362 OPERATING PATTERN DECAL 88
37 BASIC OPERATION OF HYDRAULIC CONTROLS 89
371 SAFETY LOCK LEVER 89
372 KPSS (KOBELCO POWER SENSING SYSTEM) WORK MODE SWITCH 90
373 MACHINE TRAVEL CONTROLS 91
374 MACHINE ATTACHMENT & SLEWING CONTROLS 94
375 USING AUTO ACCELERATION 99
376 TOWING THE MACHINE 99
38 PRACTICES TO IMPROVE EFFICIENCY100
39 HYDRAULIC BREAKER104
391 SELECTION OF THE HYDRAULIC BREAKER104
392 BEFORE OPERATING THE HYDRAULIC BREAKER104
393 HYDRAULIC OIL LEVEL CHECK AND CONTAMINATION PREVENTION104
394 BASIC OPERATION104
395 BREAKER AND NIBBLER SELECTOR SWITCH105
396 CONTROL PEDAL105
397 SETTING SELECTOR VALVE106
398 SETTING STOP VALVE106
310 SAFETY PRECAUTIONS107
311 MAINTENANCE FOR NIBBLER / BREAKER109
3111 REPLACEMENT SCHEDULE109
3112 REINFORCEMENT OF ATTACHMENT109
312 DOZER BLADE SAFETY PRECAUTIONS110
313 CAUTION ON USING RUBBER SHOES111
3131 PROPER USAGE111
3132 PROHIBITED WORK111
3133 CAUTIONS ON USAGE113
3134 INSPECTING RUBBER SHOE115
3135 ADJUSTING THE RUBBER SHOE TENSION116
314 FLAGMAN HAND SIGNALS117
4 MAINTENANCE124
41 GENERAL INFORMATION126
42 GENERAL SAFETY126
43 INSPECTION AND MAINTENANCE CHART130
44 FLUIDS AND FILTERS134
441 REQUIRED FLUIDS AND QUANTITIES134
442 REQUIRED FILTERS134
443 FLUIDS AND LUBRICANTS135
444 LUBRICANT SPECIFICATIONS136
45 PRE-START (EVERY 8 HOURS) INSPECTION & MAINTENANCE137
451 ENGINE OIL LEVEL137
452 ENGINE COOLANT LEVEL137
453 ENGINE FLUID LEAKS138
454 FAN BELT WEAR AND TENSION138
455 FUEL LEVEL139
456 AIR CLEANER140
457 ENGINE ELECTRICAL141
458 HYDRAULIC OIL LEVEL141
459 BOOM SWING FUNCTIONS143
4510 HYDRAULIC FUNCTIONS143
4511 HYDRAULIC OIL LEAKS143
4512 MACHINE ELECTRICAL144
4513 STEPS AND HANDRAILS144
4514 FRAME STRUCTURE144
4515 TRACKS AND COMPONENTS145
4516 TRACK TENSION147
4517 BOOM AND ARM148
4518 BLADE, CUTTING EDGE, BUCKET TEETH & SIDE CUTTERS148
46 50 HOUR (WEEKLY) & NEW MACHINE BREAK-IN INSPECTION & MAINTENANCE PROCEDURES149
461 CHANGING ENGINE OIL AND/OR FILTER149
462 FUEL TANK DRAIN151
463 WATER SEPARATOR152
464 AIR INTAKE SYSTEM152
465 RADIATOR, OIL COOLER AND DEBRIS SCREEN153
466 HYDRAULIC RETURN FILTERS154
467 BATTERIES155
47 100 HOUR (MONTHLY) INSPECTION & MAINTENANCE PROCEDURES157
471 ATTACHMENT LUBRICATION157
472 DOZER BLADE LUBRICATION157
473 REPLACEMENT OF CUTTING EDGE (OPT)158
48 120 HOUR INSPECTION & MAINTENANCE PROCEDURE159
481 SLEWING MOTOR REDUCTION OIL159
482 TRAVEL MOTORS REDUCTION OIL160
49 250 HOUR (3-MONTH) INSPECTION & MAINTENANCE PROCEDURE161
491 ATTACHMENT LUBRICATION161
492 BOOM SWING LUBRICATION162
493 SLEWING REDUCTION LUBRICATION162
494 AIR CONDITIONER FILTERS162
495 INSPECTING COUNTERWEIGHT ATTACHING BOLTS FOR LOOSENING163
496 BELT TENSIONER (FAN & AIR CONDITIONER)164
410 500 HOUR INSPECTION & MAINTENANCE PROCEDURES165
4101 ENGINE OIL AND FILTER ELEMENT165
4102 FUEL FILTER167
4103 BLEEDING AIR FROM THE FUEL SYSTEM168
4104 BLEEDING AIR IN FUEL SYSTEM (AUTO AIR BLEEDING DEVICE / OPTION)168
4105 GREASING THE SLEWING RING169
4106 CHECKING SLEWING RING FITTING BOLTS FOR LOOSENING169
4107 FUEL SYSTEM INJECTION PRESSURE AND NOZZLE CONDITION (ATOMIZATION)169
4108 CHECKING THE AIR CONDITIONER REFRIGERANT170
411 1000 HOUR (12-MONTH) INSPECTION & MAINTENANCE PROCEDURES171
4111 ENGINE VALVE CLEARANCE171
4112 ENGINE COMPRESSION PRESSURE171
4113 INSPECTION OF STARTER AND ALTERNATOR171
4114 ENGINE FUEL INJECTION TIMING171
412 2000 HOUR INSPECTION & MAINTENANCE PROCEDURES172
4121 CHANGE ENGINE COOLANT172
4122 CHANGE HYDRAULIC OIL174
4123 CHANGE OIL IN TRAVEL MOTOR REDUCTION UNITS176
4124 CHANGE OIL IN SLEWING REDUCTION UNIT177
4125 CHANGE GREASE IN SLEWING RING GREASE BATH178
4126 HYDRAULIC TANK BREATHER178
4127 ATTACHMENT AND DUST SEALS179
4128 WINDSHIELD WASHER RESERVOIR181
413 MISCELLANEOUS182
4131 FUSES182
4132 PERIODICAL INSPECTION ITEMS183
4133 MACHINE STORAGE187
4134 CARE DURING STORAGE187
4135 REMOVING MACHINE FROM STORAGE187
414 INSPECTION MAINTENANCE CHECK LIST188
5 TRANSPORTATION190
51 GROUND TRANSPORTATION192
511 MACHINE PREPARATION192
512 LOADING THE MACHINE193
513 SECURING MACHINE TO TRAILER195
52 LIFTING MACHINE196
53 LIFTING MACHINE (WITHOUT ATTACHMENT)198
54 SHIPPING DIMENSIONS199
541 MACHINE WITH ATTACHMENTS199
542 BOOM WITH ARM CYLINDER200
543 ARM WITH BUCKET CYLINDER200
544 ARM WITH BUCKET CYLINDER AND BUCKET200
545 DOZER BLADE201
546 BUCKET201
6 SPECIFICATIONS202
61 GENERAL SPECIFICATIONS204
611 MACHINE DIMENSIONS204
612 DOZER BLADE SPECIFICATIONS205
613 WORKING WEIGHTS205
614 STANDARD WORKING RANGES206
615 BOOM207
616 ARM207
617 SHOES207
618 PERFORMANCE SPECIFICATIONS208
619 MACHINE AND COMPONENT WEIGHTS210
6110 LIFTING CAPACITIES211
6111 LIFTING CAPACITIES212
6112 LIFTING CAPACITIES213
62 OPTIONAL ATTACHMENTS -SPECIFICATIONS214
621 WORKING RANGES214
622 BUCKET AND ARM COMBINATIONS215
63 TORQUE SPECIFICATIONS216
631 CAPSCREWS AND NUTS216
632 ORS JOINT (“O”-RING SEALING TYPE)217
633 NUTS AND SLEEVES218
634 FLARE TYPE FITTING JOINTS218
635 N2 (NYLON) TUBE FITTING JOINTS218
636 TORQUE VALUES FOR MOST COMMON BOLTS219
64 MISCELLANEOUS INFORMATION220
641 TEMPERATURE TABLE220
642 SPECIAL PIPE WRENCHES220
643 WEIGHT OF MATERIALS TABLE221
644 CAPS AND PLUGS FOR TUBES AND HOSE FITTINGS221
7 TROUBLESHOOTING224
71 GENERAL TROUBLESHOOTING226
8 SPECIAL PROCEDURES 0
81 GENERAL 0
82 RELEASING TRAVEL MOTOR BRAKES 0
821 TOOLS AND EQUIPMENT REQUIRED 0
822 PROCEDURES 0
83 LOWERING ATTACHMENT WHEN SUDDEN ENGINE FAILURE OCCURS 0
831 HOW TO LOWER ATTACHMENT 0
832 HOW TO LOWER ATTACHMENT 0
84 HYDRAULIC TANK PRESSURE 0
85 RELEASING SLEWING BRAKE 0
851 TOOLS & EQUIPMENT REQUIRED 0
852 PROCEDURES 0

Contact us: [email protected]

https://vimeo.com/732865336

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.M