New Holland WE150B Wheeled Excavator Operator’s Manual 47485142 – PDF DOWNLOAD

Description

New Holland WE150B Wheeled Excavator Operator’s Manual 47485142 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

New Holland WE150B Wheeled Excavator Operator’s Manual 47485142 – PDF DOWNLOAD

GENERAL INFORMATION:
Note to the Owner:

• This manual is designed as a guide for the correct and safe use of the machinery and for its correct maintenance.
• Always following the rules in the manual guarantees the best performance, operating economy and a long life for the
  machine and also makes it possible to avoid the most common causes of accidents that may occur during work or
  maintenance operations.
• Read the manual carefully, paying special attention to the instructions regarding safety, operation and maintenance
  to prevent risks or injury during usage or when carrying out maintenance operations on the machine.
• Before handing the machine over to an operator, check that:
  • The operator has been properly trained in the correct and safe use of the machine.
  • Also make sure that the operator has read the instructions in this manual and that he has understood them fully.
• Always keep this manual in the cab (see Keep Operator Manual storage). Make sure that it is always intact and in
  good condition. Contact the Dealer for further copies or a translation into a different language from the country of use.
• The machine has been designed and constructed in accordance with the most rigorous standards of quality and in
  compliance with current safety regulations. Never use the machine for applications not included in the manual. If the
  machine needs to be used for work that involves the use of special equipment, accessories or instruments, consult
  the Dealer to make sure that any adaptations or modifications carried out comply with the technical specifications of
  the machine and with the safety standards.
• Any modification or adaptation that is not approved by the manufacturer may invalidate the original conformity of
  the machine to the safety requirements and the persons that carry out these unapproved modifications will be held
  responsible for the consequences.

TABLE OF CONTENTS:

New Holland WE150B Wheeled Excavator Operator’s Manual 47485142 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Product identification 1-4
Vibration levels 1-9
Noise level 1-10
Cab protection (ROPS and FOPS) 1-11
Biodiesel fuel – Biodiesel fuels 1-12
Operator’s manual storage – Keep Operator’s manual 1-13
2 SAFETY INFORMATION
SAFETY PRECAUTIONS 2-1
Safety rules 2-8
Safety signs or informational decals – Personal safety 2-9
SAFETY DECALS 2-36
Rear view mirrors Ensuring visibility 2-44
Camera – Personal safety 2-46
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Cab 3-1
OPERATOR’S SEAT
Operator’s seat 3-7
Seat belt 3-11
FORWARD CONTROLS
Console Front console – Localisation overview 3-12
LEFT-HAND SIDE CONTROLS
Cab controls – Localisation overview Left hand console – Localisation overview 3-33
Automatic temperature control (ATC) 3-35
RIGHT-HAND SIDE CONTROLS
Cab controls – Localisation overview 3-39
Radio 3-47
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Hydraulic oil level 4-1
Fuel level 4-2
Engine oil level 4-3
Engine coolant level 4-4
Windshield washer reservoir 4-5
Fuel prefilter/water separator 4-6
Wheels and tires Pressure check and wear 4-7
Hydraulic service brakes – Advice Service brake and parking brake – check 4-8
Swing control Upper structure holding brake – Check 4-9
Nuts and screws tightening torque 4-9
STARTING THE UNIT
Before starting the engine Start up immobilizer 4-10
Starting the engine 4-13
Booster battery procedure 4-15
Inspection after starting the engine 4-17
Engine warm up 4-18
Hydraulic oil warm up 4-19
STOPPING THE UNIT
Stopping the engine 4-20
PARKING THE UNIT
Parking the machine 4-21
5 TRANSPORT OPERATIONS
ROAD TRANSPORT
Frame – Load 5-1
SHIPPING TRANSPORT
Lifting the machine 5-7
RECOVERY TRANSPORT
Towing the machine 5-8
6 WORKING OPERATIONS
GENERAL INFORMATION
Booms, dippers, and buckets – Operating 6-1
Hydraulic travel system – Operating 6-2
Attachment controls 6-10
Swing control 6-12
Leveling mode 6-14
Stabilizers or blade 6-15
Oscillating axle control 6-18
Practice to improve efficiency 6-20
Hand signals 6-22
Machine operation in adverse weather conditions 6-27
Emergency release of upper structure holding brake 6-28
7 MAINTENANCE
GENERAL INFORMATION
Foreword 7-1
Maintenance summary decal 7-4
Break-in period 7-5
MAINTENANCE CHART
Maintenance Chart 7-6
Every 50 hours
Swing bearing 7-7
Front axle grease fittings Axles Floating Pins 7-7
Swing reduction unit oil 7-8
Cab outside air filter 7-9
Air conditioning 7-10
Engine cooling system 7-11
Wheels and tires 7-12
Lights 7-13
Every 100 hours
Bucket grease fittings 7-15
Attachment lubrication 7-16
Every 250 hours
Blade and stabilizers joints 7-18
Steering trunnion pins and cardan shaft 7-19
Floating axle locking cylinders contact faces 7-19
Engine air filter: outer element 7-20
Fuel tank 7-21
Every 500 hours
Fuel filter 7-22
Engine oil and filter 7-24
Differential and planetary oil 7-26
Gearbox oil 7-27
Rear axle fluid level 7-27
Cab outside air filter 7-28
Swing bearing teeth 7-29
Tightening torques 7-30
Engine belts 7-33
Every 1000 hours
Fuel pre-filter 7-34
Engine air filters 7-35
Differential and planetary oil 7-36
Gearbox oil 7-37
Rear axle fluid 7-37
Hydraulic oil return filters 7-38
Hydraulic reservoir breather 7-39
Pilot control filter 7-40
Swing reduction unit oil 7-41
Every 1500 hours
Alternator drive belt 7-42
Air conditioning compressor drive belt 7-43
Every 3000 hours
Hydraulic oil 7-44
Engine coolant 7-46
Electrical system
Fuses and relays 7-48
Fluids and lubricants
Fluids and lubricants WE150B 7-53
8 TROUBLESHOOTING
ALARM(S)
Display fault codes Diagnostic indication on the display 8-1
9 SPECIFICATIONS
General specifications 9-1
Dimensions and weights 9-3
Digging data 9-10
Loads handling 9-16
Travelling on public roads 9-18
10 ACCESSORIES
Hydraulic Hammer 10-1
Hydraulic Shears 10-6
Low flow operation 10-10
Quick coupler 10-11
Clamshell bucket system 10-16
Bucket hook 10-19
Overload warning system 10-21
Control valve operation 10-24
Filling the fuel tank 10-25
Cab protection 10-27
Dozer blade 10-27
Transport operations 10-28
11 FORMS AND DECLARATIONS
Declaration of conformity 11-1

Questions? Email us: [email protected]

https://vimeo.com/730706099

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V