OM Pimespo LOGO Restyling Series 4516 SERVICE MANUAL – PDF DOWNLOAD

Description

OM Pimespo LOGO Restyling Series 4516 SERVICE MANUAL – PDF DOWNLOAD

FILE DETAILS:

OM Pimespo LOGO Restyling Series 4516 SERVICE MANUAL – PDF DOWNLOAD

Language : English
Pages :139
Downloadable : Yes
File Type : PDF

DESCRIPTION:

OM Pimespo LOGO Restyling Series 4516 SERVICE MANUAL – PDF DOWNLOAD

General Recommendations
Avoiding accidents

The vast majority of accidents in workshops are caused by lack of observance of simple and basic rules of safety . For this reason a large part of them can be avoided: it is enough to anticipate their possible causes and take steps to apply caution and prudence required. As with every type of machine it is not possible to exclude in absolute every possible potential dangerous situation. A careful and safe technician is the best security against accidents. The respect of a single and basic safety rule would be more than enough to avoid many serious accidents

Safety rules
In general
Carefully follow the procedure for maintenance and repair.

• Never carry out any cleaning, lubrication or maintenance with the battery connected, except than in those cases it is demanded.
• Do not use rings, watches, loose clothing such as ties, torn overalls or scarves, undone jackets, unzipped blouses that can get into moving parts. It is advisable to wear clothing designed to reduce accidents: helmets, non slip shoes, gloves, safety goggles.
• Do not carry out any repairs on the machine with people sitting on the truck unless they are the usual operators and are helping with the operation in hand. Do not use the machine or its attachments from a position other than the driving one. Ensure that there is no pressure inside hydraulic circuit before opening plugs and covers.
• Read the instructions in this manual. All works must be carried out with the greatest care and attention. All stepladders and platforms used in the workshop or field must conform to the safety requirement in force. Label all controls to indicate that there is maintenance in progress. Jam machine and any other attachment to be lifted. Do not smoke while topping up the battery as the fumes are flammable.
• Brakes are inoperative when they are disengaged manually for maintenance: in these cases you should take care to wedge the machine so that it does not move. To tow a broken down machine, use a tow or another fork lift fully laden with its load down, if available.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

OM Pimespo LOGO Restyling Series 4516 SERVICE MANUAL – PDF DOWNLOAD

GENERAL RECOMMENDATIONS 1
Avoiding accidents 1
Safety rules 1
Electrical system 3
Hydraulics 3
Removals and installations 3
1 INTRODUCTION 1.1
Description of truck 1.1
Truck version 1.1
2 DATA 2.1
Technical data 2.1
Hydraulic circuit diagram 2.2
Electric circuit diagram 2.2
Standard parameters program table 2.2
3 DRIVING POSITION 3.1
Standard and reversible tiller 3.1
4 CREEP PUSH BUTTONS ON BACK REST 4.1
5 OPERATOR PLATFORM 5.1
Footboard 5.1
Fork side bulkhead or “Backrest” 5.2
Backrest pushbutton assembly 5.2
Battery side bulkhead 5.3
Ed.12/02 – Rev. 10/04 Cod.60424526 Page II
6 TILLER HEAD CONTROLS AND STEERING WHEEL GROUP CONTROLS. 6.1
Tiller head and Steering wheel box 6.2
Tiller and steering control butterfly. 6.2
Accelerator potentiometer 6.2
Travel direction selector 6.3
Tiller anti-crush Pad 6.3
Tiller head pushbuttons and Steering group push buttons 6.3
7 SPECIAL DEVICES ON TOP OF LOGO WITH STEERING WHEEL. 7.1
Arrow showing position of traction wheel (Steering) 7.1
Steering group unlocking wheel. 7.1
8 DASHBOARD CONTROLS AND INSTRUMENTATION 8.1
Emergency stop pushbutton 8.1
ON OFF commutator key switch. 8.2
Battery Discharge Indicator and Hour meter 8.2
Access to on board charger connector. (Optional accessory) 8.3
Battery plug with pull out handle for emergency stop. 8.3
9 ELECTRIC STEERING SYSTEM (AVAILABLE AS OPTIONAL EXTRA ON TILLER
MODEL ONLY) 9.1
L.E.S. electronic module 9.2
PC Diagnostics with “Service” software 9.4
Menu description 9.5
Description of parameters shown 9.7
Setting parameters 9.8
Locating faults causes 9.8
Alarms 9.9
Ed.12/02 – Rev. 10/04 Cod.60424526 Page III
10 “COMBI” ELECTRONIC CONTROL 10.1
Working diagram of new Series 4516 with fixed platform and Tiller or Steering wheel 10.1
Working diagram of new Series 4516 with fixed platform and Tiller or Steering wheel 10.2
COMBI – Technical Specifications 10.3
COMBI diagnostics 10.5
Parameter modification 10.7
Monitoring signals 10.8
Programming voltage to accelerator potentiometer 10.9
Alarms memory 10.10
Configurations 10.10
Selecting a model 10.10
Adjustments 10.10
Adding Function 10.10
Special adjustment 10.11
Special adjust. 10.11
Hardware setting 10.12
Alarms 10.12
11 TRACTION AND INTERLOCK DEVICES 11.1
Traction and interlock devices with tiller steering: 11.1
Standard tiller positions 11.1
Reversible tiller positions 11.1
Platform raised interlocks 11.2
Traction enabled : 11.2
Traction enabled with tiller traction 11.2
Traction enabled with steering wheel 11.2
Traction speed 11.2
Top speed limitation with and without load (optional feature) 11.3
Speed limitation forks direction 11.3
Speed reduction on bends 11.3
Creep movement with the backrest pushbuttons. 11.3
Ed.12/02 – Rev. 10/04 Cod.60424526 Page IV
Traction disabled 11.4
Traction motor 11.4
12 BRAKING SYSTEM 12.1
Magnetic brake 12.1
Electric braking (energy recovery) 12.1
13 LIFTING AND LOWERING, SAFETY INTERLOCKS 13.1
Lowering 13.1
Lowering interlocks 13.1
Lifting 13.1
Interlocks on lifting 13.1
Pump electric motor 13.2
14 CHASSIS 14.1
15 COVERS AND LIDS 15.1
Battery housing lid: 15.1
Lid for Standard tiller and Reversing tiller 15.1
Lid for Steering wheel 15.1
Motor housing lid 15.2
16 WHEELS 16.1
Traction Wheel 16.1
Load rollers and guide rollers (optional) 16.1
Pivoting Wheel 16.1
17 BATTERIES 17.1
Batteries Weights and Sizes 17.1
Battery connectors (Plug and socket) 17.1
Additional plug set for Spare Batteries (On demand) 17.2
Battery exchange 17.2
Ed.12/02 – Rev. 10/04 Cod.60424526 Page V
Battery vertical drop/lift (standard version) 17.2
Battery exchange – side exit (on demand) 17.2
Roller stand / roller trolley (on demand) 17.3
On board battery charger (on demand) 17.3
Charging graph 17.4
18 CABLES 18.1
Looms and connectors 18.1
Protecting fuses 18.1
19 OPERATING CLIMATIC CONDITION 19.1
Working environment for the “standard” truck 19.1
Working conditions for a “cold store” truck 19.1
20 DOCUMENTATION WITH TRUCK 20.1
Extra documentation set 20.1
21 STANDARD SPECIFICATIONS AND OPTIONAL 21.1
Versions table 21.1
22 GENERAL SERVICING OPERATIONS 22.1
Check and servicing table 22.1
Refill table: 22.2
Refills for standard preparation 22.2
Refills for the cold store preparation 22.2
General lubrication 22.2
Electromagnetic brake setting 22.2
Main bolts and relative tightening torques table 22.2
Motor Brushes wear table 22.3
Battery Indicator Discharge slope instrument setting 22.3
Setting of electric guide potentiometer by means of a PC 22.3
Ed.12/02 – Rev. 10/04 Cod.60424526 Page VI
23 TRAVELLING ON SLOPES 23.1
24 WORKING FLOOR REQUIREMENTS 24.1

Questions? Email us: [email protected]

https://vimeo.com/856364186?share=copy

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.M