PEZAG CM 164 CYCLOMOWER Operation & Parts Manual – PDF DOWNLOAD

1.Machine must never be tested on a tractor in an enclosed space because of danger from exhaust fumes!
2. Always check traffic and operational safety before any putting the machine into operation!

3.Adhere to the general rules of health and safety precautions besides the advice of this manual!

4. The installed warning and advisory signs give important hints for a safe operation; adhering to serves your own safety!
5. When making use of public roads adhere to applicable traffic rules!
6. Become acquainted with all installations and control devices as well as with their function before beginning the operation! Doing this during operation would be too late!
7. The clothing of the operator should be tight. Avoid wearing any loose clothing!
8. Before beginning to drive and/or operate check surrounding area (children!). Ensure sufficient visibility during all operation and transport!
9. Nobody shall ride on the mower during transport and/or operation!
10. Special care shall be taken when (dis)mounting the mower on/off the tractor!
11. When attaching/detaching the mower place the jack stand into the corresponding position!
12. Always fit front weights to the fixing points provided for that purpose.
13. Adhere to maximum permissible axle loads, total weights and transport dimensions!
14. Install and check transport equipment, e.g. lighting, warning devices, protections!
15. Control rope for remote actuation of transport lock shall be guided and positioned in a way it never inadvertently releases nor blocks desired movement actuation.
16. For road transport bring mower in a transport position and secure it! For operation bring mower in a operational position.
17.Never leave the operator’s seat during operation or transport.
18. Moving behaviour, steerability and braking performance are influenced by mounted implements and ballast weight! Ensure sufficient braking effect and safe manageability!
19. Always adapt the speed to the local conditions! When making short turns note the larger radius because of increased width and/or length of the combination as well as mass and inertia changes due to the other center of gravity position!
The transport speed of the machine in aggregation with the tractor must never exceed 15 km/h. 20. Do not operate a machine unless all protection is installed and in functional position!
21. Never stay or allow anyone to stay within the operating area!
22. Never stay or allow anyone to stay within the turning and slewing area!
23. Before leaving the tractor lower the mower onto the ground, apply the parking brake, shut down the engine and remove the ignition key!
24.
Allow nobody to stay between tractor and mower unless the tractor is prevented from inadvertent rolling away by applied parking brake and/or placed chocks!
25. Before (un)hitching the mower on the three-point linkage set the controls in a position that prevents from inadvertent lifting lowering!
22.X
Never stay or allow anyone to stay within the turning and slewing area!
23. Before leaving the tractor lower the mower onto the ground, apply the parking brake, shut down the engine and remove the ignition key!
24.Allow nobody to stay between tractor and mower unless the tractor is prevented from inadvertent rolling away by applied parking brake and/or placed chocks!
25. Before (un)hitching the mower on the three-point linkage set the controls in a position that prevents from inadvertent lifting lowering!