Standard 30 MF Service Manual Raytheon Anschütz Gyro Compass Operator Guide PDF

Description

Standard 30 MF Service Manual Raytheon Anschütz Gyro Compass Operator Guide PDF DOWNLOAD

DESCRIPTION

Raytheon Anschütz Standard 30 MF Gyro Compass Service Manual – Complete Marine Navigation System Documentation

This official Standard 30 MF service manual provides comprehensive installation, operation, and maintenance procedures for the Raytheon Anschütz Standard 30 MF marine gyrocompass navigation system. Published by Raytheon Anschütz GmbH (Edition 01, Document 10000000756, November 2020), this manual is the authoritative technical reference for marine electronics technicians and certified service engineers servicing Raytheon Anschütz gyro compass manual equipped vessels.

Equipment Overview – Standard 30 MF

Equipment Type: Marine Gyro Compass Navigation System
Model: Standard 30 MF
Type Number: 110-700
Manufacturer: Raytheon Anschütz GmbH, Kiel, Germany
Document Number: 10000000756
Edition: 01
Revision Date: November 2020
Manual Pages: 256 pages
Manual Type: Operator and Service Manual

Standard 30 MF System Description

The Standard 30 MF is a sophisticated marine gyrocompass system designed for commercial vessels providing:

Core Navigation Functions:

• Gyro compass – True north reference independent of magnetic variations
• Heading information – Accurate ship’s heading output
• Rate of turn (RoT) – Angular velocity measurement
• Attitude data – Pitch and roll information
• NMEA data output – Industry-standard marine data protocols

System Configurations:

• Standalone system – Single gyrocompass installation
• System with Distribution Unit (type 138-118.NG002/NG003)
• Redundant distribution systems – Dual compass configurations

Operator Units:

• Type 130-627.NG00x – Operator Unit Gyro Standard 30 MF
• Type 130-626.NG00x – Operator Unit Gyro

Complete Manual Contents

CHAPTER 0 – GENERAL (Pages 0-1 to 0-6)

Change History:

• March 2017: First edition
• August 2018: Updates to data descriptions
• May 2020: IEC 61162-450 and Webserver information added

Conventions of Depiction:

• List markers and action sequences
• Operating element identification
• WARNING statements – Serious injury/death hazards
• CAUTION statements – Equipment/environmental damage
• NOTE statements – Important non-hazard information

General Safety Instructions:

WARNING – Voltage-Regulated Devices:

• Risk of death from electrical shock
• Damaged insulation protocols
• Qualified electrician requirements
• Moisture protection for live parts
• System closure requirements
• Fuse bypass prohibition

WARNING – Improper Operation:

• Serious injury and material damage risks
• Intended purpose usage only
• Manual procedure adherence

WARNING – Unqualified Personnel:

• Operation area access control
• Qualified personnel requirements

WARNING – General Rules:

• National/regional disposal regulations
• Work area safety standards
• Component instruction adherence

CAUTION – Harmful Substances:

• Environmental damage from wrong disposal
• Disposal regulation compliance

ESD Protection:

• Electrostatic Sensitive Device warnings
• Earth Bonding Point (EBP) requirements
• Dissipative work surface requirements
• Protective measure deployment

List of Abbreviations:

• Technical acronyms and terminology
• Marine navigation standards
• Communication protocols

Product and Performance Standards:

• IMO compliance
• IEC 61162-450 standards
• Marine equipment directives

Further Documents:

• Spare parts catalogue
• Dimensional drawings
• Cable and connection diagrams

CHAPTER 1 – DESCRIPTION (Pages 1-1 to 1-20)

Intended Use:

• Marine vessel navigation
• True north heading reference
• Attitude and rate data provision

Scope of Delivery:

• Standard 30 MF main unit
• Operator unit configurations
• Cables and connectors
• Documentation package

Technical Data:

Mechanical Data:

• Physical dimensions
• Mounting specifications
• Weight and size parameters
• Installation drill hole patterns

Accuracy:

• Heading accuracy specifications
• Rate of turn precision
• Attitude measurement accuracy
• Settlement time

Electrical Data:

• Power supply: DC voltage specifications
• Power consumption ratings
• Operating voltage ranges
• Power supply redundancy (P1 and P2 sockets)

Input Data:

• Latitude input – Manual or automatic
• Speed input – Manual or automatic (speed over ground/water)
• NMEA sentence reception
• Serial data inputs
• CAN-Bus inputs
• Ethernet inputs

Output Data:

• Serial output interfaces (N1 and N2):
  • RS-422 differential signaling
  • Multiple serial ports (Ports 3, 4, 5, 6)
  • Configurable baud rates
  • NMEA sentence output
• CAN-Bus output – J1939 protocol
• Ethernet output (E1 and E2):
  • UDP/TCP protocols
  • IEC 61162-450 compliance
  • Configurable IP addresses
• Analog output capabilities
• Sentence PANZHRP – Proprietary format details

Technical Description:

Operator Units:

• Type 130-627.NG00x features and functions
• Type 130-626.NG00x specifications
• Display elements
• Control keypad functions

System Overview:

• Standalone system architecture
• Distribution Unit integration (138-118.NG002/NG003)
• Redundant compass configurations
• System block diagrams

Operation and Display Elements:

• LCD display information
• Function key assignments
• Status indicators
• Menu navigation

Interfaces and Cables:

Data Interfaces N1 and N2:

• Complete pin assignments (25-pin D-sub connectors)
• RS-422 differential pairs
• Signal descriptions
• Connector specifications

Power Supply Sockets P1 and P2:

• Pin assignments for redundant power
• Voltage and current specifications
• Cable routing requirements

Ethernet Ports E1 and E2:

• RJ-45 connectors
• EIA/TIA-568B pin assignments
• 10/100 Mbps capability
• Network configuration

CHAPTER 2 – INSTALLATION (Pages 2-1 to 2-64+)

Safety Information and Remarks:

• Installation precautions
• Electrical safety protocols
• ESD protection during installation

Operation within Service Menu:

• Service menu access procedures
• Configuration parameter settings
• Calibration functions

Installation Instructions:

Hardware Installation:

• Required installation material:
  • Mounting brackets
  • Fasteners and hardware
  • Cable assemblies
  • Installation material for system applications
• Preparations:
  • Site survey
  • Mounting location selection
  • Foundation preparation
  • Environmental considerations
• Cabling:
  • Power cable routing
  • Data cable installation
  • Cable protection and labeling
  • Grounding requirements
• CAN-Bus Termination:
  • Terminator placement
  • Resistance specifications
  • Network topology

Settings via Operator Unit 130-627:

CAN-Bus Address Configuration:

• Address assignment procedures
• Multi-compass system addressing
• Address conflict resolution

Operator Unit Connection:

• Physical connection procedures
• Cable routing
• Connector engagement verification

Setting to Work and Commissioning:

• Initial power-up sequence
• Compass settling procedures
• Latitude and speed input:
  • Manual latitude entry
  • Automatic latitude reception
  • Speed over ground/water configuration
• Heading correction value calculation:
  • Misalignment compensation
  • Example calculations
  • Verification procedures

Interface Adjustment:

• COMPASS OUTPUT DATA SETUP submenu:
  • Serial port 3, 4, 5, 6 configuration
  • NMEA sentence selection
  • Baud rate settings
  • Refresh rate configuration
  • Factory settings documentation
• Ethernet output configuration
• CAN output setup
• Analog output adjustment

Serial Input/Output Configuration:

• Baud rate changes
• CAN address modification
• Ethernet IP address assignment
• Port mapping

Settings via Web Service Tool:

Web Service Tool Description:

• Browser-based configuration interface
• Network connection requirements
• Login procedures
• Menu structure navigation

Web Service Tool Operation:

• Main Menu structure:
  • Compass Current Values
  • Ship Integration
  • Compass Settings
  • Advanced Configuration

Compass Current Values:

• Attitude and Heading Output:
  • Real-time heading display
  • Pitch and roll values
  • Quality indicators
• Rate Output:
  • Rate of turn data
  • Angular velocity information
• Secondary Data:
  • Temperature readings
  • System status

Ship Integration:

• Compass Mounting:
  • Installation position documentation
  • Mounting angle corrections
• Compass Alignment:
  • Alignment offset settings
  • Reference mark alignment
• Compass Positioning:
  • Location coordinates
  • Antenna offset compensation
• Latitude Input:
  • Manual entry interface
  • Automatic source selection
• Speed Input:
  • SOG (Speed Over Ground) source
  • SOW (Speed Over Water) source
  • Speed filtering

Interface Configuration:

• CAN settings:
  • Device instance
  • Transmission rates
  • PGN selection
• Ethernet/LAN 1/2:
  • IP address configuration
  • Subnet mask
  • Gateway settings
  • UDP/TCP port assignment
• Cut-off Frequencies:
  • Signal filtering parameters
  • Damping values
• Analog Output:
  • Scaling parameters
  • Output range
• Ethernet Input:
  • NMEA-over-Ethernet reception
  • Source IP filtering
• RS422 Output 1/2/3/4:
  • Sentence selection
  • Baud rate configuration
  • Output enable/disable
• RS422 Input 1/2:
  • Input sentence filtering
  • Talker ID recognition
• Alert Communication Settings:
  • Bridge Alert Management (BAM)
  • Alert routing configuration
• Alert Ethernet/LAN Connection:
  • Network alert distribution

System Status and Diagnostics:

• SPU Status (Signal Processing Unit)
• HMU Status (Heading Measurement Unit):
  • Operational parameters
  • Measurement values
• Incident Log:
  • Last 100 entries
  • Timestamp information
  • Event descriptions
• Alert List:
  • Active alerts
  • Historical alerts
  • Alert priorities
• Input Data (NMEA):
  • Received sentences
  • NMEA talker identification
  • Data validity

System Management:

• Time and Date synchronization
• Update Application Software:
  • Firmware upload procedures
  • Version verification
• Restart Compass:
  • Soft reset
  • Factory reset options
• Configuration File Management:
  • Configuration upload
  • Configuration download
  • Factory reset procedures

Documentation of Settings:

• Mounting position records
• Correction value documentation
• Serial port configuration sheets
• Ethernet output data tables
• CAN output data tables
• Angular rates output settings

CHAPTER 3 – OPERATION (Pages 3-1 to 3-8)

Switching On and Off:

• Power-up sequence
• Shutdown procedures
• Emergency shutdown

Standard Operation:

• Normal operating screens
• Display interpretation
• Function key usage

Manual Input of Latitude and Speed:

• Latitude Input:
  • Entry procedures
  • Format specifications
  • Validation
• Speed Input:
  • Manual speed entry
  • Speed source selection
  • Update frequency

COMPASS STATUS Menu Item:

• Status display interpretation
• Operational parameters
• Quality indicators
• Error conditions

CHAPTER 4 – ALERT MANAGEMENT (Pages 4-1 to 4-5+)

Bridge Alert Management:

• IMO MSC.302(87) compliance
• Alert priority levels
• Alert acknowledgment
• Alert responsibility transfer

Alert Messages:

• Warning symbols – Critical conditions
• Caution symbols – Non-critical conditions
• Alert signaling:
  • Visual indicators
  • Audible alarms (where equipped)
  • Remote alert distribution
• Possible Alerts:
  • Power supply failures
  • Sensor errors
  • Communication failures
  • Calibration issues
  • Temperature excursions
  • Data validity warnings

CHAPTER 5 – MAINTENANCE AND REPAIR (Page 5-1)

Preventive Maintenance:

• Scheduled maintenance intervals
• Inspection procedures
• Cleaning requirements

Repair Procedures:

• Qualified personnel requirements
• Spare parts identification
• Return-to-service testing

CHAPTER 6 – DISPOSAL (Page 6-1)

Environmental Compliance:

• National/regional disposal regulations
• Hazardous material handling
• Recycling procedures
• Component disposal

ANNEX – SUPPLEMENTARY DOCUMENTATION

Included References:

• Spare Parts Catalogue – Standard 30 MF
• Dimensional Drawing – 110-700.HP005
• Dimensional Drawing – Operator Unit 130-627.HP005
• Cable and Connection Diagram – 10-CO-D-X00002-C
• Cable and Connection Diagram – Dual system with DU – 10-CO-D-X00003-C

Manufacturer Information

Raytheon Anschütz GmbH

• Zeyestr. 16-24
• D-24106 Kiel, Germany
• Tel: +49 431 3019-0
• Fax: +49 431 3019-291

Why This Manual is Essential

This marine gyrocompass maintenance guide provides:

✓ Factory-authorized procedures – Official Raytheon Anschütz documentation
✓ Complete system coverage – Standalone and redundant configurations
✓ Web-based configuration – Modern browser interface setup
✓ Interface specifications – Serial, CAN, Ethernet detailed documentation
✓ IMO compliance – Bridge Alert Management integration
✓ Installation procedures – Complete hardware and software commissioning
✓ Troubleshooting guidance – Alert management and diagnostics
✓ Safety protocols – Comprehensive electrical and ESD protection

Perfect For

• Marine electronics technicians servicing navigation equipment
• Ship engineers maintaining gyrocompass systems
• Navigation officers operating Standard 30 MF systems
• Shipyard installation teams commissioning new vessels
• Maritime service organizations specializing in Anschütz equipment
• Technical training institutions teaching marine navigation systems
• Fleet technical management maintaining multiple vessels
• Marine surveyors inspecting navigation equipment

Applications

Standard 30 MF gyrocompasses are installed on:

• Commercial cargo vessels
• Passenger ships and cruise liners
• Tankers and bulk carriers
• Naval auxiliary vessels
• Offshore support vessels
• Research vessels
• Large yachts and superyachts
• Special purpose vessels

Compliance and Standards

• IMO (International Maritime Organization) requirements
• IEC 61162-450 – Maritime navigation data interfaces
• NMEA 0183 – Standard data protocol
• J1939 – CAN-Bus protocol
• Bridge Alert Management – IMO MSC.302(87)

FILE DETAILS