STILL STED FORKLIFT ELECTRONIC EQUIPMENT FOR LIFT TRUCKS EU 3 12-EU 3 15-EU 3 17-5 EUl5-EUl7.5 REPAIR Manual – PDF DOWNLOAD

Description

STILL STED FORKLIFT ELECTRONIC EQUIPMENT FOR LIFT TRUCKS EU 3 12-EU 3 15-EU 3 17-5 EUl5-EUl7.5 REPAIR Manual – PDF DOWNLOAD

FILE DETAILS:

STILL STED FORKLIFT ELECTRONIC EQUIPMENT FOR LIFT TRUCKS EU 3 12-EU 3 15-EU 3 17-5 EUl5-EUl7.5 REPAIR Manual – PDF DOWNLOAD

Language : English
Pages : 265
Downloadable : Yes
File Type : PDF

DESCRIPTION:

STILL STED FORKLIFT ELECTRONIC EQUIPMENT FOR LIFT TRUCKS EU 3 12-EU 3 15-EU 3 17-5 EUl5-EUl7.5 REPAIR Manual – PDF DOWNLOAD

AVOIDING ACCIDENTS

Most accidents and injuries that occur in workshops are caused by the failure to observe some simple basic care and safety rules. For these reasons, in most cases they can be avoided: it is sufficient to foresee the possible causes and then take the necessary actions using caution and care. No matter how well designed and built, no machine can be guaranteed to be completely accident-free. An alert and cautious mechanic is the best guarantee against accidents. The strict observance of just one basic safety rule would be enough to avoid many serious accidents.

SAFETY RULES
General
Follow the maintenance and repair procedures carefully

• Never wear rings, wrist watches, jewelry, loose or dangling items of clothing such as ties, torn clothing, scarves, unbuttoned jackets or overalls with open zippers that could get caught in moving parts. Approved safety clothing is recommended such as: helmets, anti-slip shoes, gloves and safety goggles.
• Never carry out any service operations on the machine with anyone sitting in the seat, unless the operator is fully-trained and involved in the operation to be carried out. Never start the machine or use its attachments from any position other than the operator’s seat. Switch off the motor and check that there is no pressure left in the hydraulic circuits before removing plugs and covers. See the instructions provided for this purpose in this manual. All service operations should be carried out with the maximum care and attention.
• The service steps and platforms used in the workshop or on site should comply with current accidentprevention regulations. Label all controls to indicate that a service operation is being carried out. Block the machine and any attachments to be raised. Never check or refill the fuel tank, hydraulic system oil tank and batteries while smoking since the fluids are inflammable.
• The brakes are deactivated when they are released manually for service operations. In these cases, special blocks or similar devices should be used to control the machine. Use only the prescribed attachment points when towing. Attach the connections carefully. Check that the pins and/or bolts provided are firmly secured prior to pulling. Never stand close to drawbars, ropes or chains that are working under load. To move a broken-down machine, use a trailer or a low-platform truck, if available.
• To load or unload the machine from the transportation vehicle, choose a level area providing a solid support for the trailer or truck wheels. Anchor the machine firmly to the truck or trailer loading platform and block the wheels. For electric heaters, battery chargers and similar equipment use only auxiliary power supply sources having an efficient earth connection to avoid possible elect ric shocks.
• If you need to raise or handle heavy parts, use appropriate hoists and similar equipment, and make sure that no one is in the immediate vicinity. Never pour petrol or diesel fuel into wide, open and deep containers due to the risk from inflammable vapours and spillage.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

STILL STED FORKLIFT ELECTRONIC EQUIPMENT FOR LIFT TRUCKS EU 3 12-EU 3 15-EU 3 17-5 EUl5-EUl7.5 REPAIR Manual – PDF DOWNLOAD

SAFETY STANDARDS 4
TWIN-MOTOR CHOPPER TECHNICAL
DESCRIPTION 7
TECHNICAL DATA 7
INSTRUMENTATION AND DISPLAYS 7
INTRODUCTION 8
THE DRIVE CHOPPERS 8
□ Characteristics of the output voltage
waveforms 9
PUMP CHOPPER 10
DRIVE CONTROL 10
BRAKING CONTROL 11
OPERATION DURING TURNS 11
FUNCTION OF STEERING MICROSWITCHES 12
PUMP MOTOR CONTROL 12
START-UP AND PARAMETER
PROGRAMMING 12
BATTERY CHARGE STATUS 13
COUNTER 13
BATTERY VOLTAGE AND CURRENT DISPLAY 13
BATTERY VOLTAGE INDICATOR
CALIBRATION 13
LANGUAGE SELECTION 13
DISPLAY OF PROTECTION DEVICE
OPERATIONS 13
SOFTWARE PROTECTION DEVICES 14
HARDWARE PROTECTION DEVICES 15
PROTECTION AGAINST POLARITY REVERSAL 16
TROUBLESHOOTING 16
TROUBLESHOOTING PROGRAMME 17
□ Faults indicated during start-up 17
□ Faults indicated during operation or lifting 18
□ Faults not indicated 19
COMPONENT TESTING 21
□ Mosfet 21
□ Power card 21
PRECHARGE PHASE :TEST 22
GB

Contact us: [email protected]

https://vimeo.com/859261953?share=copy

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M