TEREX AERIALS TA50E SELF-PROPELLED ARTICULATING BOOM LIFT OPERATOR’S MANUAL – PDF

1. TASOE Specifications
[.1 Design Specifications
I.I.I Closed Dimensions and Weights
I. 1.2 Operating Dimensrions
1.1.3 Design Specifications
1.1.4 _ Working Envelope
1.1.5 General Arrangement .
1.2 Component Specifications
1.2.1 Mechanical Components
1.2.2 Hydraulic Components
1.2.3 Oil
1.2.4 Equivalent Oils
1.2.5 Electrical Components
2. §3r§tv gagggtigns
2.1 Safety Symbols
2.2 _ Safety Rules and Precautions
2.3 Safety Features
2.3.1 Emergency Stop Pushbuttons
2.3.2 Footswitch Control
2.3.3 Tilt Alarm .
2.3.4 Movement Alarm
2-3.5 Torque Chart
3. Ogemting Procedures
3.1 Pre-use Checks
3.2 Ground Control Chocks
3.3 Cage Control Checks
3.4 Unloading Procedures
3.5 Driving
3.5.1 Drive Controls
3.5.1.1 Forward and Reverse
3.5.1.2 Drive Speed Control
3.5.1.3 Steering Control
3.5.1.4 Descending Slope
3.6 Differential Lock
3.6.1 Engage Differential Lock
3.6.2 Disengage Differential Lock
3.7 Braking System ~
3.7.1 Brakes in Static Mode
3.7.2 Brakes in Drive Mode ,
3.7.3 Emergency Braking
3.8 Access Operations (Cage Control)
3.9 Access Operations (Ground Control)

3.10 – Afier Use and Storage Instructions

3.1 1 Battery Charging

3.12 Battery Indicator ‘

3.13 Special Precautions (Cold Weater)

3. 14 Special Precautions

3.14.1 Towing

314.1. 1 Towing without Towing Package

3.14.2 Mod Conditions

3.14.3 Crane Operations

3.14.4 . Driving on Slopes

3.14.5 Testing the Tilt Alarm

4. Emergency Procedures & Systems

4.1 Emergency Procedures

4.1.1 Situation: Platform elevated, operator not incapacitated,
but unit will not operate properly using the
platform controls.

4.1.2 Situation: Unit elevated, with operator incapacitated at
platform controls.

4.1.3 Situation: Platform in contact with live power lines. and
operator incapacitated.

42 Emergency Systems & Procedures

4.2.1 Emergency Pump

4.2.2 Emergency Rotation

4. 2.3 Emergency Towing

4.2.3.1 Towing without towing package fitted

4.2.3.2 Towing with towing package

5. Mnintmagsg Sghggnlg

5.1 General lnfomration

5.1.1 Introduction

5.1.2 Hydraulic Oils

5.2 Servicing Check List (Basic Machine Only)

5.2.1 Servicing (Daily)

5-2.2 Servicing (Weekly)

5.2.3 Servicing (Monthly)

5.2.4 Servicing (Six Monthly)

5.2.5 Servicing (Yearly)

5.2.6 Servicing (Four Yearly)

5.3 Servicing

5.3.1 Daily Routine Servicing

5.3.1. I Hydraulic 011 Level

5.3.1.2 Tyre Condition ‘

5.3.1.3 Cage Door Lock

5.3.2 Weekly Routine Service

5.3.21 Control Valves
5.3.2.2. Hydraulic System

5.3.2.3 – Steering

5.3.2.4 Start Battery

5.3.2.5 Pivot Pins

5.3.3. Monthly Routine Servicing
5.3.3.! Hydraulic Oil

5.3.3.2 Chassis Bolts

5.3.3.3 Slew Ring Gear Teeth

5.3 3.4 Lubrication

5.3.3.5 Pivot Pin Seanity

5.3.3.6 . Drive Gearbox Oil Level

5.3.4 Six Monthly Routine Servicing
5.3.4.] Cage Levelling

5.3.4.2 Boom Pivots

5-3.4.3 Boom Cylinders

5.3.4.4 Axle

5.3.4.5 Return Line Filter

5.3.4.6 Machine Systems Test

5.3.5 Yearly Routine Servicing
5.3.5.l Hydraulic Oil

5.3.5.2 Hydraulic Oil Tank

5.3.5.3 Hydraulic Tank Refill Procedure
5.3.5.41 Structural Examination

5.3.5.5 Cage Mounting

5.3.5.6 Levelling Cylinders

5.3.6 Four Yearly Routine Servicing
5.3.6.1 Flexible Hoses

5.3.6.2 Pivot Pins and Bearings

5.3.6.3 Pin Replacement

5.3.6.3. l Boom Pin Replacement
5.3.6.3.2 Tie Rail Pin Replecement
5.3.6.3.3 Lift Cylinder Pin Replacement
5.3.6.34 Sell” Levelling Cylinder Pin Replacement
5.3.6-3.5 Zoom Boom Cylinder Pin Replacement
5.3.6.4 Zoom Cyfinder

5.3.6.5 Zoom Pads

5.3.6.5.] Front Zoom Pad Replacement
5.3.6.5.2 Rear Zoom Boom Replacement
5.3.6.6 Lifi Cylinder Seals

5.3.6.6.! Seal Replacement – Cylinder ln-place
5.3.6.6.2 Seal Replacement – Cylinder Removed
5.4 Lubrication

5.4.1 General Lubrication

5.4.2 Slew BearinglGear Lubrimnts
5.4.2.1 Slew Bearing Lubrication
5.4.2.2 Slew Gear Lubrication