Tigercat 1045 1055 FORWARDER OPERATOR’S MANUAL – PDF DOWNLOAD

Description

Tigercat 1045 1055 FORWARDER OPERATOR’S MANUAL – PDF DOWNLOAD

DESCRIPTION:

Tigercat 1045 1055 FORWARDER OPERATOR’S MANUAL – PDF DOWNLOAD

INTRODUCTION :

An Operator’s manual, Service manual and a Parts catalog are made available by Tigercat to assist the
dealer, customer and operator in becoming familiar with the features of the 1045/1055 Forwarder.
Serial numbers:-
10450101 and up.
10550201 and up.

• The operator’s manual will assist the operator with the techniques of proper and safe operation of the
  Forwarder. There is also important information regarding the safe operation of optional equipment and
  attachments.
• The service manual contains safety and servicing procedures and a preventive maintenance
  schedule to ensure optimum machine performance.
• Section 1 in both the operator’s manual and the service manual contains safety information that must be
  followed. As well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed
  where necessary, drawing attention to possible hazards when performing certain procedures.
• Only trained personnel should be allowed to operate or work on the machine.
• The information contained in this manual is current at time of printing. Improvements to the machine are
  on-going and may not be covered, therefore in these cases contact your Tigercat dealer for the appropriate
  information.
• The phrase “and up” appearing in this manual after the serial number implies that the related information
  is current for any machine serial number HIGHER than the serial number preceding the “and up”.
• Tigercat reserves the right to make changes to the machine after this manual release date that may not
  immediately appear in this manual.

TABLE OF CONTENTS:

Tigercat 1045 1055 FORWARDER OPERATOR’S MANUAL – PDF DOWNLOAD

1045 1055 OPERATOR (10450101&UP,10550201&UP) ISSUE 1.0…. 1
INTRODUCTION…………………………………… 3
NON-APPROVED FIELD PRODUCT CHANGES……………….. 4
SECTION 1 – SAFETY…………………………………. 5
ARTICULATION LOCK ……………………………… 15
BATTERY DISCONNECT SWITCH ………………………. 11
COOLING SYSTEM ………………………………… 13
EXHAUST FUMES …………………………………. 15
FIRE PREVENTION ……………………………….. 16
FIRE PREVENTION GUIDELINES ………………….. 16
WHAT ELSE TO DO BEFORE YOU EXPERIENCE A FIRE ….. 17
WHAT TO DO AFTER A FIRE …………………….. 18
WHAT TO DO IN CASE OF A MACHINE FIRE …………. 17
FIRST AID …………………………………….. 8
FLUID LEAKS …………………………………… 13
HYDRAULIC PRESSURE HAZARD ………………………. 13
LOOSE CLOTHING HAZARD ………………………….. 14
PARKING THE MACHINE ……………………………. 11
PROTECTIVE CLOTHING ……………………………. 7
SAFETY INTERLOCK SWITCHES ON DOORS ………………. 12
SAFETY PRECAUTIONS, GENERAL …………………….. 7
SAFETY PRECAUTIONS, OPERATING …………………… 10
SAFETY PRECAUTIONS, SERVICING …………………… 13
SAFETY SYMBOLS ………………………………… 6
SIGNAL WORDS ………………………………….. 6
SECTION 2 – CONTROLS & OPERATION…………………….. 19
A/C ON/OFF SWITCH ……………………………… 32
AIR…………………………………………… 19
CLEANER …………………………………… 72
CLEANER UNLOADER VALVE ……………………… 72
FILTER RESTRICTION WARNING ………………….. 62
ALL WHEEL DRIVE SWITCH …………………………. 64
AM/FM STEREO RADIO/CD PLAYER ……………………. 64
ARTICULATION LOCK ……………………………… 86
BATTERY DISCONNECT SWITCH ………………………. 70
BLADE/CRANE SWITCH …………………………….. 24
BLOWER OUTLET CONTROL ………………………….. 32
BRAKE PEDAL CONTROL ……………………………. 23
BRAKE PRESSURE WARNING …………………………. 62
CAB TILT PUMP …………………………………. 72
CAB WARNING ALARMS …………………………….. 66
CARE OF THE MACHINE ……………………………. 83
CENTRE JOINT ………………………………….. 86
CENTRE JOINT OSCILLATION LOCK …………………… 30
CHASSIS ………………………………………. 70
CLEANING A/C CONDENSER AND COOLER PACKAGE ………… 85
CLEANING INSTRUCTIONS FOR LEXAN WINDOWS ………….. 84
COLD IDLE ENGINE SPEED ………………………… 41
COLD IDLE RPM …………………………………. 57
COMPUTER ……………………………………… 38
CONDITIONAL MESSAGES …………………………… 60
CONTROL PANEL………………………………….. 19
RIGHT HAND ………………………………… 31
UPPER …………………………………….. 64
CONTROL POD ON ARMREST, R.H……………………… 40
COOLANT LEVEL WARNING ………………………….. 63
CRANE START (CM) ………………………………. 60
CRANE/BLADE SWITCH …………………………….. 24
CURRENT OUTPUT SETTINGS DESCRIPTION ……………… 48
DATE TIME SETTINGS …………………………….. 46
DIAGNOSTICS AND FUNCTION ADJUSTMENT MENUS ………… 41
DIFFERENTIAL LOCK INDICATOR LIGHTS ………………. 25
DIFFERENTIAL LOCKS …………………………….. 25
DISPLAY ENGINE/LEVELS/DRIVE …………………….. 39
DISPLAY MODULE ………………………………… 36
DOORS AND ACCESS PANELS ………………………… 70
DRIVE START (CM) ………………………………. 60
EMERGENCY SHUT-OFF SWITCH ………………………. 32
ENGINE………………………………………… 20
AIR CLEANER ……………………………….. 72
COOLANT HEATER CONTROLS …………………….. 64
COOLANT LEVEL WARNING ………………………. 63
COOLANT TEMPERATURE (°C) ……………………. 39
HOOD ……………………………………… 70
HOURS …………………………………….. 39
LOAD (%) ………………………………….. 39
OIL PRESSURE WARNING ……………………….. 62
OVERSPEED (CM) …………………………….. 61
SPEED …………………………………….. 24
STOP INDICATOR LIGHT ……………………….. 29
TEMPERATURE WARNING ………………………… 41
WARNING INDICATOR LIGHT …………………….. 29
FAN SPEED SWITCH ………………………………. 32
FINE CONTROL ………………………………….. 49
FOOT PEDAL CONTROLS ……………………………. 23
FORWARDING TECHNIQUE …………………………… 83
FRONT WINDSHIELD WIPER/WASHER …………………… 31
FUEL………………………………………….. 20
LEVEL (%) …………………………………. 40
LEVEL WARNING ……………………………… 63
SHUT-OFF VALVE …………………………….. 71
TANK ……………………………………… 71
FUNCTION PARAMETERS SETTINGS ……………………. 54
GATE DOWN/UP SWITCH ……………………………. 29
GAUGE MODE ……………………………………. 38
HAZARD SWITCH …………………………………. 64
HYDRAULIC……………………………………… 20
FILTERS …………………………………… 73
OIL FILL PUMP ……………………………… 74
OIL LEVEL WARNING ………………………….. 62
OIL RESERVOIR ……………………………… 73
OIL TEMPERATURE (°C) ……………………….. 39
OIL TEMPERATURE WARNING …………………….. 58
OIL VACUUM PUMP ……………………………. 74
TANK COMPARTMENT …………………………… 71
ignition switch – 3 position ……………………. 35
INFORMATION MENU ………………………………. 42
INFORMATION MENU DESCRIPTION ……………………. 42
IQAN MDM COMPUTER DISPLAY ………………………. 38
JOYSTICK………………………………………. 20
BLADE OPERATION ……………………………. 26
CRANE OPERATION ……………………………. 26
LADDER DOWN/UP SWITCH ………………………….. 26
LEFT JOYSTICK CRANE OPERATION …………………… 27
LIGHTS………………………………………… 21
CAB INTERIOR-SWITCH ………………………… 64
CAB WORKING-SWITCH …………………………. 64
CHASSIS WORKING-SWITCH ……………………… 64
ROAD-SWITCH (OPTIONAL) ……………………… 64
LOADING / UNLOADING OPERATIONS ………………….. 81
LOW BRAKE PRESSURE WARNING ……………………… 62
MACHINE MODEL …………………………………. 56
MAXIMUM TRAVEL SPEED (CM) ………………………. 61
MEASURE MENU DESCRIPTION ……………………….. 42
MINIMUM CURRENT ……………………………….. 48
MODE MENU …………………………………….. 41
MODE MENU DESCRIPTION ………………………….. 41
MODE MENU OPERATION ……………………………. 42
MOTOR BEGIN DISP ………………………………. 57
MOTOR MAX ACCE TIME ……………………………. 56
NO GEAR ENGAGED WARNING ………………………… 59
NO MOTOR SPEED (CM) ……………………………. 61
OPERATING MACHINE ……………………………… 75
OPERATOR’S SEAT ……………………………….. 68
OPTIONAL EQUIPMENT……………………………… 21
FUEL HEATER SWITCH …………………………. 34
HIGH BEAM INDICATOR ………………………… 35
TURN SIGNAL SWITCH ………………………… 34
TURN SIGNAL INDICATOR ………………………. 34
OSCILLATION LOCK ………………………………. 30
PARK BRAKE/LADDER DOWN WARNING ………………….. 58
PILOT…………………………………………. 21
RESET SWITCH ………………………………. 28
SYSTEM SHUT OFF ……………………………. 28
POWER OUTLETS………………………………….. 21
12 VOLT POWER ……………………………… 65
24 VOLT POWER ……………………………… 65
PRE-START CHECKS ………………………………. 75
PROPERTIES MENU ……………………………….. 47
PROPERTIES MENU OPERATION ………………………. 47
PUMP CAB TILT …………………………………. 72
PUMP DISP …………………………………….. 57
R.H. CONTROL PANEL …………………………….. 31
RADIO/CD PLAYER ……………………………….. 64
REAR WINDSHIELD WIPER/WASHER ……………………. 31
RESTARTING AN ENGINE THAT HAS RUN OUT OF FUEL …….. 79
RIGHT JOYSTICK BLADE OPERATION ………………….. 26
RIGHT JOYSTICK CRANE OPERATION ………………….. 26
SAFETY ……………………………………….. 82
SEAT………………………………………….. 22
ADJUSTMENTS ……………………………….. 69
ARMREST ADJUSTMENT …………………………. 69
BACK ANGLE ADJUSTMENT ………………………. 69
FORE/AFT SLIDE …………………………….. 69
ROTATION ADJUSTMENT ………………………… 69
SHOCK ABSORBERS ……………………………. 69
SECONDARY CONTROLS……………………………… 22
BRAKE …………………………………….. 65
STEERING ………………………………….. 65
SELECTING A FUNCTION TO ADJUST ………………….. 49
SETTINGS MENU …………………………………. 44
SETTINGS MENU OPERATION ………………………… 44
START/STOP SLOPE ………………………………. 49
STARTING ENGINE ……………………………….. 78
STEER CHECK ERROR (CM) …………………………. 61
STEER DAMPEN ………………………………….. 57
STEERING CONTROL ………………………………. 27
STOPPING ENGINE ……………………………….. 79
SYSTEM BYPASSED WARNING ………………………… 60
SYSTEM DIAGNOSTICS AND FUNCTION ADJUSTMENT MENUS ….. 41
SYSTEM DIAGNOTICS ……………………………… 41
SYSTEM TEST AND WARM UP ………………………… 80
SYSTEM WARNING MESSAGES ………………………… 58
TEMPERATURE CONTROL ……………………………. 32
THROTTLE PEDAL CONTROL …………………………. 23
TILT PUMP, CAB ………………………………… 72
TIRE ROLLING CIRCUMFERENCE ……………………… 55
TOWING INSTRUCTIONS ……………………………. 88
TRANSMISSION GEAR SELECT SWITCH …………………. 26
TRANSMISSION Gear Switch ……………………….. 26
TRANSMISSION HOURS …………………………….. 40
TRANSPORTING INSTRUCTIONS ………………………. 87
TRAVEL (CRAWL) SPEED SWITCH …………………….. 25
TRAVEL DIRECTION SWITCH ………………………… 25
TRAVEL SPEED (Km/H) ……………………………. 40
TRAVELLING WITH A LOAD …………………………. 82
TRAVELLING WITHOUT A LOAD ………………………. 81
TRIP DISTANCE …………………………………. 40
UPPER CONTROL PANEL ……………………………. 64
VOLTAGE (VOLTS) ……………………………….. 40
VOLTAGE WARNING ……………………………….. 63
WAIT TO START INDICATOR ………………………… 34
WARNING DEVICES………………………………… 22
BUZZER ……………………………………. 66
DISPLAY …………………………………… 66
HORN ……………………………………… 34
LIGHTS ……………………………………. 66
WINDSHIELD WIPER/WASHER ………………………… 31
WORKING RPM …………………………………… 54
SECTION 3 – LUBRICATION & MAINTENANCE………………… 91
AIR CLEANER……………………………………. 91
CHANGING FILTER ELEMENTS …………………….107
MAINTENANCE ………………………………..106
SERVICING ………………………………….107
UNLOADER VALVE ……………………………..106
AIR CONDITIONING ……………………………….108
ARTICULATION JOINT ……………………………..105
AXLE LUBRICATION ……………………………….115
BELT – ENGINE SERPENTINE ………………………..116
CAB…………………………………………… 91
LOWERING THE CAB ……………………………111
RAISING THE CAB …………………………….110
CAB AIR FILTERS………………………………… 91
FRESH AIR ………………………………….109
RECIRCULATING AIR – A/C UNIT …………………109
CENTRE JOINT …………………………………..104
CHARGE PRESSURE FILTER-DRIVE PUMP ………………..103
CONTROL POD ON ARMREST, R.H………………………105
CRANE, ROTATOR AND GRAPPLE MAINTENANCE ……………117
DRAINING AND REFILLING BOGIE HOUSING ……………..116
DRAINING AND REFILLING DIFFERENTIAL ………………115
ENGINE HOOD ……………………………………112
ENGINE SERPENTINE BELT ………………………….116
FILTERS……………………………………….. 91
CHARGE PRESSURE …………………………….103
FUEL FILTER/WATER SEPARATOR ………………….100
HYDRAULIC OIL ………………………………102
REMOVE AND REPLACE ………………………….100
RETURN OIL STRAINER …………………………104
SERVICING GUIDELINES FOR OIL FILTERS ………….103
FIRE PREVENTION ……………………………….. 94
FUEL TANK STRAINER ……………………………..101
GENERAL ………………………………………. 94
HOT WATER SHUT OFF VALVE ………………………..108
HYDRAULIC OILS ………………………………… 97
INITIAL PRE-DELIVERY INSPECTION …………………. 93
LINK SNUBBER MAINTENANCE ………………………..117
MACHINE STARTUP ………………………………..114
NEW MACHINE MAINTENANCE ………………………… 93
OSCILLATION JOINT ………………………………105
PREVENTIVE MAINTENANCE SCHEDULE …………………. 93
REAR (BOGIE) AXLE………………………………. 92
PLANETARY DRIVES (4 FILLING POINTS) …………..115
SCHEDULED MAINTENANCE…………………………… 92
1000 HOURS ………………………………… 96
125 HOURS …………………………………. 95
250 HOURS …………………………………. 96
500 HOURS …………………………………. 96
8 HOURS …………………………………… 95
SEASONAL ………………………………….. 96
SERVICE AND LUBRICATION POINTS ………………….. 99
SLEW BEARING LUBRICATION ………………………..104
SNUBBER TENSION ADJUSTING ……………………….117
STARTUP PROCEDURE AFTER MAJOR MACHINE MAINTENANCE ….113
TEMPERATURE CONTROL – CAB HEATER/AC ………………109
TILTING THE CAB ………………………………..110
TORQUE CHART …………………………………..118
TORQUE, FLUID CONNECTIONS ……………………….120
TORQUE SPECIFICATIONS – GENERAL ………………….119
UNLOADER VALVE …………………………………106

IMAGES PREVIEW OF THE MANUAL:

TIGERCAT 1045 1055 FORWARDER OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V