Tigercat 220C Loader OPERATOR’S MANUAL – PDF DOWNLOAD

Description

Tigercat 220C Loader OPERATOR’S MANUAL – PDF DOWNLOAD

DESCRIPTION:

Tigercat 220C Loader OPERATOR’S MANUAL – PDF DOWNLOAD

• An Operator’s manual, Service manual and a Parts catalog are provided by Tigercat to assist the dealer,
  customer and operator in becoming familiar with the features of the Tigercat 220C Loader, serial number
  2200501 and up.
• The operator’s manual will assist the operator with the techniques of proper and safe operation of the
  Loader. The service manual contains safety guidelines, a preventive maintenance schedule and servicing
  procedures to ensure optimum machine performance.
• Section 1 in both the operator’s manual and the service manual contains safety information that must be
  followed. As well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed
  where necessary, drawing attention to possible hazards when performing certain procedures.
• Only trained personnel should be allowed to operate or work on the machine.
• The information contained in this manual is current at time of printing. Improvements to the machine are
  on-going and may not be covered, therefore in these cases contact your Tigercat dealer for the
  appropriate information.
• The phrase “and up” appearing in this manual after the serial number implies that the related information
  is current for any machine serial number HIGHER than the serial number preceding the “and up”.
• Tigercat reserves the right to make changes to the machine after this manual release date that may not
  immediately appear in this manual.

TABLE OF CONTENTS:

Tigercat 220C Loader OPERATOR’S MANUAL – PDF DOWNLOAD

220C OPERATOR ISSUE 20 1
INTRODUCTION 3
NON-APPROVED FIELD PRODUCT CHANGES 4
SECTION 1 – SAFETY 5
battery disconnect switch 10
cooling system 12
exhaust fumes 13
FIRE PREVENTION 14
FIRE PREVENTION GUIDELINES 14
WHAT ELSE TO DO BEFORE YOU EXPERIENCE A FIRE 15
WHAT TO DO AFTER A FIRE 16
WHAT TO DO IN CASE OF A MACHINE FIRE 15
first aid 8
Fluid leaks 12
loose clothing hazard 13
protective clothing 7
SAFE REMOVAL OF COUNTERBALANCE AND CHECK CARTRIDGE 13
SAFETY PRECAUTIONS, OPERATING 9
SAFETY PRECAUTIONS, SERVICING 11
SAFETY SYMBOLS 6
SIGNAL WORDS 6
SECTION 2 – CONTROLS & OPERATION17
A/C ON/OFF SWITCH 26
AIR CLEANER 40
AIR CLEANER UNLOADER VALVE 40
AIR CONDITIONER/HEATER 26
AIR SOURCE 26
AM/FM STEREO RADIO/CD 31
AUXILIARY POWER OUTLET 25
BATTERY DISCONNECT – SWITCH 36
BOOM CONTROLS, JOYSTICK LEVER 19
BULB TEST SWITCH 26
CAB CONTROLS 18
CARE OF THE MACHINE 51
CHECK ENGINE OIL LEVEL 43
CLEANING A/C CONDENSER AND COOLER PACKAGE 44
CLEANING LEXAN WINDOWS 51
CONTROL PANEL 21
CONTROL VALVES17
HOIST CONTROL VALVE 39
STICK CONTROL VALVE 39
DISPLAY MODULE17
COMPONENT DESCRIPTION 28
FAULTS AND WARNINGS 29
KEYPAD FUNCTIONS 29
START-UP OPERATION 28
ENGINE COMPARTMENT 36
ENGINE OIL LEVEL 43
ENGINE SPEED – SWITCH 23
FAN – VENTILATION 31
FAN SPEED – OFF/LOW/MED/HIGH 26
FILTER17
AIR CLEANER 40
HYDRAULIC RETURN 38
PILOT 38
FILTER RESTRICTION INDICATOR 40
FILTERS 27
FIRE EXTINGUISHER 31
FOOT PEDAL – SWING 21
FUEL TANK AND FILLER 41
FUSE AND RELAY PANEL – CAB 32
FUSES AND RELAYS – ELECTRICAL BOX 33
GRAPPLE CONTROLS, JOYSTICK LEVERS 19
HAND FILL PUMP 37
HEAT – VARIABLE 26
HORN – SWITCH 22
HOT WATER SHUT OFF VALVE 27
HYDRAULIC OIL17
LEVEL 26
RESERVOIR 37
TEMP – GAUGE 26
TEMPERATURE 26
HYDRAULIC RETURN FILTERS 38
JOYSTICK – SELF PROPELLED 20
JOYSTICK LEVERS 18
JOYSTICK LH 19
JOYSTICK RH 19
KEY SWITCH 25
LIGHT – DOME 31
LIGHTER 24
LIMIT SWITCH 24
LOADER MOUNTING/INSTALLATION 49
LOW COOLANT – RED LIGHT 30
LOW FUEL LEVEL 26
MACHINE OPERATION 42
MACHINE PREPARATION 47
OPERATOR’S SEAT17
ADJUSTMENTS 34
HEIGHT ADJUSTMENT 34
LUMBAR 34
RIDE ADJUSTMENT 34
PILOT MANIFOLD 39
PILOT RESET – SWITCH 24
PILOT SYSTEM SHUT OFF 24
PRE-START CHECKS 42
RADIO – 2 WAY 31
SERVICE LIGHTS 25
SETTING THE MACHINE 46
STABILIZER OPERATION 22
STARTING THE ENGINE 45
STOPPING THE ENGINE 48
SWING – FOOT PEDAL 21
TAPE DECK/RADIO 31
THROTTLE CONTROL 23
TRAILER MOUNTING 49
TRANSPORTING THE LOADER 50
UNLOADER VALVE 40
WAIT TO START – YELLOW LIGHT 30
WATER IN FUEL – YELLOW LIGHT 30
WINDOWS 31
WINDSHIELD WASHER FLUID 31
WINDSHIELD WIPER/WASHER 31
WORK LIGHTS 25
SECTION 3 – LUBRICATION & MAINTENANCE53
AIR CLEANER53
FILTER RESTRICTION INDICATOR 66
IMPORTANT STEPS TO FOLLOW 65
IMPROPER SERVICING 65
MAINTENANCE 65
UNLOADER VALVE 66
AIR CONDITIONING 67
APPROVED HYDRAULIC OILS 62
ELECTRICAL SCHEMATIC 76
EMERGENCY EXITS, CHECK MONTHLY 57
FILTER RESTRICTION INDICATOR 66
FIRE PREVENTION 57
FIRST 50-100 HOUR INSPECTION AND SERVICE 54
GENERAL 57
HYDRAULIC OIL RETURN FILTERS 63
NEW MACHINE MAINTENANCE 54
OIL LOST FROM LEAKAGE 54
OIL SAMPLE COLLECTION PROCEDURES 56
OIL SAMPLING PROGRAM 55
PAG OIL 67
PILOT PRESSURE FILTER 64
PRE-DELIVERY INSPECTION 54
PRESSURE SETTINGS 70
PREVENTIVE MAINTENANCE SCHEDULE 54
REFRIGERANT 67
SCHEDULED MAINTENANCE53
EVERY 1000 HOURS 59
EVERY 125 HOURS 58
EVERY 2000 HOURS 59
EVERY 24 HOURS 58
EVERY 250 HOURS 59
EVERY 500 HOURS 59
EVERY 8 HOURS 58
TORQUE CHART 68
TORQUE, FLUID CONNECTIONS 72
TORQUE SPECIFICATIONS – GENERAL 68
UNLOADER VALVE 66
WEIGHTS OF COMMERCIAL WOOD 75

IMAGES PREVIEW OF THE MANUAL:

TIGERCAT 220C LOADER OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at [email protected] . We may surprise you with a nice offer

S.V