Tigercat 630 SKIDDER OPERATOR’S MANUAL – PDF DOWNLOAD

Description

Tigercat 630 SKIDDER OPERATOR’S MANUAL – PDF DOWNLOAD

DESCRIPTION:

Tigercat 630 SKIDDER OPERATOR’S MANUAL – PDF DOWNLOAD

INTRODUCTION :

• An Operator’s manual, Service manual and a Parts catalog are provided by Tigercat to assist the dealer,
  customer and operator in becoming familiar with the features of the 630 Skidder.
• The operator’s manual will assist the operator with the techniques of proper and safe operation of the
  Skidder. The service manual contains safety guidelines, a preventive maintenance schedule and
  servicing procedures to ensure optimum machine performance.
• Section 1 in both the operator’s manual and the service manual contains safety information that must be
  followed. As well, throughout the rest of the manuals WARNING and CAUTION notices are displayed
  where necessary, drawing attention to possible hazards when performing certain procedures.
• Only trained personnel should be allowed to operate or work on the machine.
• The information contained in this manual is current at time of printing. Improvements to the machine are
  on-going and may not be covered, therefore in these cases contact your Tigercat dealer for the
  appropriate information.

TABLE OF CONTENTS:

Tigercat 630 SKIDDER OPERATOR’S MANUAL – PDF DOWNLOAD

630 OPERATOR’S ISSUE 2.1……………………………….. 1
INTRODUCTION………………………………………. 3
S.A.E. STANDARDS…………………………………… 4
NON-APPROVED FIELD PRODUCT CHANGES…………………… 5
SECTION 1 – SAFETY…………………………………….. 7
battery disconnect switch …………………………..12
cooling system …………………………………….14
exhaust fumes ……………………………………..16
FIRE PREVENTION……………………………………. 7
FIRE PREVENTION GUIDELINES ………………………17
WHAT ELSE TO DO BEFORE YOU EXPERIENCE A FIRE ………18
WHAT TO DO AFTER A FIRE …………………………19
WHAT TO DO IN CASE OF A MACHINE FIRE ……………..18
first aid …………………………………………10
Fluid leaks ……………………………………….14
Hydraulic Pressure hazard …………………………..14
loose clothing hazard ………………………………15
protective clothing ……………………………….. 9
SAFETY PRECAUTIONS, GENERAL …………………………10
SAFETY PRECAUTIONS, OPERATING ……………………….11
SAFETY PRECAUTIONS, SERVICING ……………………….14
SAFETY SYMBOLS ……………………………………. 8
Signal Words ……………………………………… 8
SECTION 2 – CONTROLS & OPERATION…………………………21
CONTROLS-CAB SERIAL NUMBER 6300101 TO 6300420………….24
brake, PARKING, light …………………………..29
BRAKE PEDAL ……………………………………24
DIFF. LOCK FRONT, SWITCH ………………………..29
DIFF. LOCK REAR, SWITCH …………………………29
DOZER BLADE CONTROL …………………………….26
DRIVE PEDAL CONTROL …………………………….24
engine air filter, light ………………………..29
ENGINE COOLANT LEVEL, LIGHT ……………………..29
ENGINE COOLANT TEMPERATURE, GAUGE ………………..31
ENGINE OIL PRESSURE, GAUGE ………………………31
Ether Starting Aid, SWITCH ………………………30
Filter Bypass, light ……………………………29
FUEL GAUGE …………………………………….32
FUSE PANEL …………………………………….30
grapple constant pressure, switch ………………..26
grapple open/close, switch ………………………26
GRAPPLE PRESSURE, LIGHT …………………………29
grapple rotate, SWITCH ………………………….26
HOURMETER ……………………………………..32
Hydraulic Oil Level, light/horn ………………….28
HYDRAULIC OIL TEMPERATURE, GAUGE …………………31
IGNITION SWITCH ………………………………..30
JOYSTICK CONTROL LEVER ………………………….26
LIGHTER ……………………………………….30
LIGHTS, WORKING, FRONT, SWITCH …………………..30
LIGHTS, WORKING, REAR, SWITCH ……………………30
operator’s seat ………………………………..27
Parking brake ………………………………….25
parking brakE, Light ……………………………29
PUMP INLET PRESSURE, LIGHT ………………………29
STEERING WHEEL …………………………………24
TACHOMETER …………………………………….32
THROTTLE CONTROL ……………………………….25
TRANSFER CASE TEMPERATURE, LIGHT …………………29
VOLT METER …………………………………….32
WINCH CONTROL ………………………………….26
WINCH FREE SPOOL, LIGHT ………………………..29
WINCH FREE SPOOL, SWITCH ………………………..29
CONTROLS-CAB SERIAL NUMBER 6300421 TO 6300440………….33
BRAKE, PARKING, LIGHT …………………………..39
BRAKE PEDAL ……………………………………33
DIFF. LOCK front, light …………………………39
DIFF. LOCK FRONTswitch ………………………….35
DIFF. LOCK rear, light ………………………….39
DIFF. LOCK REAR, SWITCH …………………………35
DOZER BLADE CONTROL …………………………….36
DRIVE PEDAL CONTROL …………………………….33
engine air filter, light ………………………..39
ENGINE coolant LEVEL, light ……………………..39
ENGINE COOLANT TEMPERATURE, GAUGE ………………..41
ENGINE OIL PRESSURE, GAUGE ………………………41
ether starting aid, switch ………………………40
Filter Bypass, light ……………………………39
FUEL GAUGE …………………………………….42
fuel heater, SWITCH …………………………….41
FUSE PANEL …………………………………….41
GRAPPLE constant pressure, SWITCH ………………..34
grapple open/close, SWITCH ………………………34
GRAPPLE PRESSURE, LIGHT …………………………39
grapple rotate, SWITCH ………………………….34
HOURMETER ……………………………………..42
Hydraulic Oil LEVEL, light/horn ………………….38
HYDRAULIC OIL TEMPERATURE, GAUGE …………………42
IGNITION, SWITCH ……………………………….41
JOYSTICK CONTROL LEVER ………………………….34
LIGHTER ……………………………………….41
LIGHTS, WORKING, FRONT, SWITCH …………………..40
LIGHTS, WORKING, REAR, SWITCH ……………………40
main pump unloading valve, LIGHT …………………39
MAIN PUMP UNLOADING VALVE, SWITCH ………………..40
operator’s seat ………………………………..36
Parking brake ………………………………….34
parking brake, light ……………………………39
PUMP INLET PRESSURE, LIGHT ………………………39
STEERING WHEEL …………………………………33
TACHOMETER …………………………………….42
THROTTLE CONTROL ……………………………….35
transmission CASE TEMP., LIGHT ………………….38
VOLT METER …………………………………….42
WINCH CONTROL ………………………………….36
WINCH FREE SPOOL, LIGHT …………………………39
WINCH FREE SPOOL, SWITCH ………………………..40
CONTROLS-CAB SERIAL NUMBER 6300481 TO 6300999………….43
BRAKE PEDAL ……………………………………43
BULB TEST – SWITCH ……………………………..50
BULB TEST, SWITCH ………………………………50
DIFF. LOCK front, light …………………………49
Diff. Lock front, switch ………………………..45
DIFF. LOCK rear, light ………………………….49
Diff. Lock Rear, switch …………………………45
DOZER BLADE CONTROL …………………………….46
DRIVE PEDAL CONTROL …………………………….43
engine air filter, light ………………………..49
ENGINE coolant LEVEL, light ……………………..49
ENGINE COOLANT TEMP., GAUGE ……………………..51
engine coolant temperature, light ………………..48
ENGINE OIL PRESSURE, GAUGE ………………………51
ether starting aid, switch ………………………50
Filter Bypass, Light ……………………………49
FUEL GAUGE …………………………………….52
fuel heater, SWITCH …………………………….50
FUSE PANEL …………………………………….51
grapple constant pressure, switch ………………..45
grapple open/close, switch ………………………44
GRAPPLE PRESSURE, LIGHT …………………………49
grapple rotate, switch ………………………….44
HOURMETER ……………………………………..52
Hydraulic Oil Level, light/horn ………………….48
HYDRAULIC OIL TEMPERATURE, GAUGE …………………52
IGNITION, SWITCH ……………………………….51
JOYSTICK CONTROL ……………………………….44
LIGHTER ……………………………………….51
LIGHTS, WORKING, FRONT, SWITCH …………………..49
LIGHTS, WORKING, REAR, SWITCH ……………………49
main pump unloading valve, light …………………49
MAIN PUMP UNLOADING VALVE, SWITCH ………………..50
operator’s seat ………………………………..46
Parking brake ………………………………….44
parking brake, light ……………………………49
STEERING WHEEL …………………………………43
TACHOMETER …………………………………….52
tHROTTLE CONTROL, electric, SWITCH ……………….45
VOLT METER …………………………………….52
WINCH CONTROL ………………………………….46
WINCH FREE SPOOL, LIGHT …………………………49
CONTROLS-OTHER SERIAL NUMBER 630101 TO 6300999…………22
AIR CLEANER, ENGINE …………………………….62
AIR CONDITIONER/HEATER ………………………….53
air vents ……………………………………..53
am/fm stereo cassette …………………………..55
ARTICULATION LOCK PIN …………………………..76
battery disconnect, SWITCH ………………………64
CARE OF THE MACHINE …………………………….74
CLEANING INSTRUCTIONS FOR LEXAN WINDOWS ……….74
center joint …………………………………..69
CLEANING A/C CONDENSER, OIL COOLER AND RADIATOR ……75
ENGINE AIR CLEANER ……………………………..62
ENGINE AIR CLEANER UNLOADER VALVE ………………..62
engine air precleaner …………………………..62
ENGINE BREAK-IN PROCEDURES ………………………67
filter, fresh air ………………………………55
filter, recirculating air, a/c unit ………………53
front door, ENGINE COMPARTMENT …………………..59
FUEL TANK ……………………………………..59
GRAPPLE ……………………………………….70
OPERATING Dual Arch grapple ………………….70
OPERATING Single Arch grapple ………………..70
Hot water shut off, valve ……………………….54
Hydraulic Filters ………………………………60
HYDRAULIC HAND FILL PUMP (LATER MACHINES) …..60
hydraulic hand fill pump (earlier machines) …..61
HYDRAULIC OIL RESERVOIR …………………………60
OPERATING MACHINE ………………………………65
Pre-Start Checks: …………………………..65
RESTARTING AN ENGINE THAT HAS RUN OUT OF FUEL ….67
starting …………………………………..67
starting engine …………………………….67
STARTING IN COLD WEATHER …………………….68
STOPPING ENGINE …………………………….69
System Test and Warm-Up ……………………..68
Travelling …………………………………69
OPERATING WINCH ………………………………..70
PRESSURIZED WATER SYSTEM ………………………..55
control valve ………………………………55
FILL AND CHARGE …………………………….56
PURGING ……………………………………56
System test ………………………………..55
SKIDDING……………………………………….71
CABLE SKIDDING: …………………………….72
GRAPPLE SKIDDING ……………………………73
OPERATING THE ATTACHMENTS ……………………71
SAFETY …………………………………….71
SKIDDING TECHNIQUE ………………………….72
STARTING THE ENGINE …………………………71
starting ENGINE ………………………………..67
STARTING IN COLD WEATHER ………………………..68
STOPPING ENGINE ………………………………..69
Test ports …………………………………….64
TILTING THE CAB ………………………………..57
TOWING INSTRUCTIONS …………………………….77
transmission dipstick …………………………..64
transmission oil fill …………………………..64
TRANSPORTING INSTRUCTIONS ……………………….77
Travelling …………………………………….69
WINCH FREE SPOOL, SWITCH ………………………..46
WINCH, OPERATING ……………………………….70
SECTION 3 – LUBRICATION & MAINTENANCE…………………….79
center joint……………………………………….95
lubrication ……………………………………95
maintenance ……………………………………95
FILTER AND LUBRICATION SCHEDULE ……………………..87
FILTERS – REMOVE AND REPLACE…………………………88
FUEL FILTER/WATER SEPARATOR ……………………..88
FUEL TANK STRAINER ……………………………..88
HYDRAULIC OIL RETURN FILTERS …………………….89
HYDROSTATIC CHARGE PUMPPRESSURE FILTER …………..90
FUEL TANK STRAINER …………………………………88
GENERAL MAINTENANCE ………………………………..81
GRAPPLE SNUBBER MAINTENANCE …………………………94
HOUR METER ~ MAINTENANCE ……………………………80
NEW MACHINE MAINTENANCE……………………………..79
FIRST 25 HOURS …………………………………80
FIRST 250 HOURS ………………………………..80
Oil lost from leakage ………………………………80
PRESSURE SETTINGS ………………………………….96
SCHEDULED MAINTENANCE ………………………………82
1000 HOURS …………………………………….84
125 HOURS ……………………………………..83
250 HOURS ……………………………………..83
500 HOURS ……………………………………..83
8 HOURS ……………………………………….82
FREQUENTLY …………………………………….82
SEASONAL ………………………………………84
SERVICING AIR CONDITIONING SYSTEM ……………………92
STARTUP PROCEDURE AFTER MAJOR MAINTENANCE …………….90
TIGHTENING POINTS ………………………………….80
TORQUE CHART ………………………………………97
TORQUE CHART, GENERAL ………………………………98
WHEELS, INSTALLING …………………………………80
WINCH LUBRICATION ………………………………….81

IMAGES PREVIEW OF THE MANUAL:

TIGERCAT 630 SKIDDER OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V