TIGERCAT 822 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

Description

TIGERCAT 822 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

DESCRIPTION:

TIGERCAT 822 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

INTRODUCTION :

• An Operator’s manual, Service manual and a Parts catalog are made available by Tigercat to assist the dealer,
  customer and operator in becoming familiar with the features of the 822 Feller Buncher serial number 8220114 to
  8220189.
• The operator’s manual will assist the operator with the techniques of proper and safe operation of the 822 Feller
  Buncher. There is also important information regarding the safe operation of the saw head. The service manual
  contains safety and servicing procedures and a preventive maintenance schedule to ensure optimum machine
  performance.
• Section 1 in both the operator’s manual and the service manual contains safety information that must be followed. As
  well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed where necessary, drawing
  attention to possible hazards when performing certain procedures.
• Only trained personnel should be allowed to operate or work on the machine.
• The information contained in this manual is current at time of printing. Improvements to the machine are on-going and may not be covered, therefore in these cases contact your Tigercat dealer for the appropriate information.
• The phrase “and up” appearing in this manual after the serial number implies that the related information is current for any machine serial number HIGHER than the serial number preceding the “and up”.
• Tigercat reserves the right to make changes to the machine after this manual release date that may not immediately
  appear in this manual.

TABLE OF CONTENTS:

TIGERCAT 822 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

822 Operator’s Issue 2.3………………………………… 1
INTRODUCTION……………………………………….. 3
NON-APPROVED FIELD PRODUCT CHANGES……………………. 4
SECTION 1 – SAFETY……………………………………… 5
CAB EXITS …………………………………………. 10
COOLING SYSTEM …………………………………….. 17
EFFICIENT REACH (ER) BOOM SYSTEM PRECAUTIONS ………….. 18
EMERGENCY CAB EXITS ………………………………… 10
ENGINE DOORS ………………………………………. 19
EXHAUST FUMES ……………………………………… 19
FELLING TREES ……………………………………… 13
FIRE PREVENTION ……………………………………. 21
FIRE PREVENTION GUIDELINES ………………………. 20
WHAT ELSE TO DO BEFORE YOU EXPERIENCE A FIRE ………. 21
WHAT TO DO AFTER A FIRE …………………………. 22
WHAT TO DO IN CASE OF A MACHINE FIRE ……………… 21
FLUID LEAKS ……………………………………….. 17
HYDRAULIC PRESSURE HAZARD …………………………… 17
LOOSE CLOTHING HAZARD ………………………………. 17
parking the machine ………………………………… 14
PROTECTIVE CLOTHING ………………………………… 7
SAFETY INTERLOCK SWITCHES ON CAB DOORS ……………….. 11
SAFETY PRECAUTIONS, GENERAL …………………………. 7
SAFETY PRECAUTIONS, OPERATING ……………………….. 10
SAFETY PRECAUTIONS, SERVICING ……………………….. 14
SAFETY SYMBOLS …………………………………….. 6
SIGNAL WORDS ………………………………………. 6
APPENDIX – USING HIGH SPEED DISC SAWS SAFELY………………. 23
Comments and instructions……………………………. 23
Direction of throw ……………………………… 29
High angle wrist rotation ability ………………… 30
Recognizing the Dangers …………………………. 29
Throwing long wood pieces ……………………….. 32
Dangers …………………………………………… 25
forward …………………………………………… 24
Be aware of the hazards …………………………. 24
Other instructions ……………………………… 25
Safe practices …………………………………. 25
Several types of heads involved ………………….. 24
Stored energy ………………………………….. 24
HIGH ANGLE WRIST ROTATION CAPABILITY …………………. 31
Saw Head Don’ts ……………………………………. 37
Type of Housing makes a Difference …………………… 26
SECTION 2 – CONTROLS & OPERATION…………………………. 39
AIR CONDITIONER/HEATER CONTROLS ……………………. 52
CHECKING THE AIR CONDITIONING SYSTEM ……………. 52
AIR INTAKE CLEAN-OUT COVER PLATE …………………… 71
AIR INTAKE SEAL ………………………………….. 71
AM/FM STEREO CASSETTE …………………………….. 60
AUXILIARY POWER OUTLET ……………………………. 54
BATTERY DISCONNECT – SWITCH ……………………….. 66
BOOM CONTROLS………………………………………. 39
ER (EFFICIENT REACH) BOOM OPTION ……………….. 42
MAIN BOOM ……………………………………. 42
STICK BOOM …………………………………… 42
TILT FUNCTION, FELLING HEAD ……………………. 42
BREATHER/VENT, HYDRAULIC TANK ……………………… 67
BULB TEST SWITCH …………………………………. 49
CARE OF THE MACHINE ………………………………. 81
CIGARETTE LIGHTER ………………………………… 54
CIRCUIT BREAKERS AND FUSES ………………………… 43
CLEANING A/C CONDENSER, OIL COOLER AND RADIATOR ……… 72
COOLING ASSEMBLY – OVERALL VIEW ………………… 72
CLEANING LEXAN WINDOWS ……………………………. 81
CONTROL PANEL ……………………………………. 50
COOLANT LOW – WARNING LIGHTAND HORN ………………… 48
COOLING ASSEMBLY – CLEANING ……………………….. 72
COOLING FAN – SWITCH ……………………………… 54
DIMMER CONTROL, INSTRUMENT PANEL …………………… 49
EFFICIENT REACH (ER) BOOM SYSTEM……………………… 39
HORIZONTAL REACH MOTION CHARACTERISTICS …………. 80
OPERATION OF THE BOOM …………………………. 42
EMERGENCY EXITS…………………………………….. 39
ESCAPE HATCH …………………………………. 60
ESCAPE HATCH REMOVAL/REPLACEMENT ……………….. 61
MAINTENANCE GUIDE …………………………….. 61
SIDE DOOR ……………………………………. 60
ENGINE AIR CLEANER ……………………………….. 70
FILTER RESTRICTION INDICATOR …………………… 70
ENGINE AIR CLEANER UNLOADER VALVE ………………….. 70
ENGINE AIR PRECLEANER …………………………….. 70
ENGINE ANTI-STALL – SWITCH WITH LIGHT ………………. 50
ENGINE COLD START SWITCH ………………………….. 51
ENGINE COOLANT TEMPERATURE – GAUGE AND HORN …………. 47
ENGINE OIL PRESSURE – GAUGE ……………………….. 47
ENGINE POWER DOOR – SWITCH ………………………… 46
ENGINE RPM ………………………………………. 51
ENGINE SHUTDOWN OVERRIDE – SWITCH ………………….. 50
ENGINEHOT WATER SHUT OFF VALVES ……………………. 59
FELLING HEAD OPERATING INSTRUCTIONS ………………… 80
SAFETY PRECAUTIONS ……………………………. 80
FILTER BYPASS, HYD. OIL – WARNING LIGHT …………….. 49
FILTER, FRESH AIR – A/C UNIT ………………………. 59
FILTER, PILOT, HIGH PRESSURE ………………………. 69
FILTER, RE-CIRCULATING AIR – A/C UNIT ………………. 59
FILTERS, HYDRAULIC OIL ……………………………. 68
FIRE SUPPRESSION SYSTEM (OPTIONAL)……………………. 40
AUTOMATIC OPERATION …………………………… 55
AVOIDING DAMAGE AND FALSE DISCHARGES DURING MACH …. 58
COMPONENT LOCATIONS …………………………… 58
DISCHARGE OF THE SYSTEM ……………………….. 55
IN CASE OF FIRE ………………………………. 56
INSPECTION OF FIRE SUPPRESSION SYSTEM …………… 56
MANUAL OPERATION ……………………………… 55
FOOT PEDALS, LEFT AND RIGHT TRACK DRIVE …………….. 43
FUEL LEVEL – GAUGE ……………………………….. 47
FUEL SHUT-OFF VALVE ………………………………. 66
FUEL TANK ……………………………………….. 66
CAPACITY …………………………………….. 66
FUSE, ALTERNATOR …………………………………. 44
FUSES AND CIRCUIT BREAKERS ………………………… 43
GRAFFITI REMOVAL …………………………………. 81
HAND FILL PUMP, HYDRAULIC OIL ……………………… 69
FILLING HYDRAULIC TANK ………………………… 69
HORN, SAFETY ALERT – SWITCH ……………………….. 54
HOT WATER SHUT OFF VALVES (ENGINE) …………………. 59
HOUR METER ………………………………………. 46
HYDRAULIC OIL FILTERS …………………………….. 68
HYDRAULIC OIL LEVEL SIGHT GAUGES …………………… 68
HYDRAULIC OIL LOW – LIGHT AND HORN …………………. 49
HYDRAULIC OIL TANK ……………………………….. 67
HYDRAULIC OIL TEMPERATURE GAUGE AND HORN ……………. 48
IGNITION KEY SWITCH ………………………………. 51
INSTRUMENT PANEL …………………………………. 46
INTERIOR LIGHTS ………………………………….. 60
JOYSTICKS, LEFT AND RIGHT HAND …………………….. 42
JUMPER BAR – POSITIVE TERMINAL …………………….. 66
KEY SWITCH ………………………………………. 51
LIGHTS, SERVICE ………………………………….. 46
LIGHTS, SERVICE – SWITCH ………………………….. 46
LIGHTS, WORK – SWITCH …………………………….. 49
LOAD CONTROL DIAGNOSTICS – WARNING LIGHT. N/A ……….. 49
MACHINE PREPARATION ………………………………. 78
SYSTEM TEST AND WARM-UP ……………………….. 78
OPERATING MACHINE ………………………………… 74
PRE-START CHECKS ……………………………… 74
RESTARTING, AFTER RUNNING OUT OF FUEL …………… 78
STARTING ENGINE ………………………………. 77
STARTING IN COLD WEATHER ………………………. 77
SYSTEM TEST AND WARM-UP ……………………….. 78
OPERATING TIPS WITH LOAD SENSING …………………… 79
OPERATOR’S SEAT (SEATS INC.) ……………………… 64
PILOT FILTER, HIGH PRESSURE ……………………….. 69
PILOT SYSTEM INTERLOCK SWITCH (FRONT DOOR) ………….. 53
PILOT SYSTEM “OFF “- PUSH BUTTON SWITCH …………….. 53
PILOT SYSTEM “OFF” LIGHT ………………………….. 49
PILOT SYSTEM “ON” LIGHT …………………………… 49
PILOT SYSTEM RESET – PUSH BUTTON SWITCH …………….. 53
POWER ENGINE DOOR – SWITCH ………………………… 46
POWER DOOR LATCH ……………………………… 46
PRECLEANER, ENGINE AIR ……………………………. 70
PUMP DRIVE GEARBOX OIL TEMP. – GAUGE ……………….. 46
PUMP INLET – WARNING LIGHT. N/A ……………………. 49
RETURN FILTERS ~ HYDRAULIC OIL …………………….. 68
SAW – SWITCH …………………………………….. 54
SAW “ON” LIGHT …………………………………… 49
SEAT, OPERATOR’S (SEATS INC.) …………………….. 64
SERVICE LIGHTS …………………………………… 46
STARTING ENGINE ………………………………….. 77
STARTING IN COLD WEATHER ………………………….. 77
STEREO CASSETTE AM/FM RADIO ……………………….. 60
STOPPING ENGINE ………………………………….. 80
SWING BRAKE – SWITCH WITH LIGHT ……………………. 50
SYSTEM CIRCUIT BREAKERS AND FUSES ………………….. 43
TACHOMETER ………………………………………. 47
THROTTLE SWITCH ………………………………….. 51
TRACK DRIVE, LEFT AND RIGHT ……………………….. 43
TRACK, LOW/DRIVE – SWITCH WITH LIGHT ……………….. 53
TRAVELLING (BOOM RAISED) ………………………….. 79
TREE COUNTER …………………………………….. 46
VENT/BREATHER, HYDRAULIC TANK ……………………… 67
VOLTMETER ……………………………………….. 47
WINDOWS – CLEANING ……………………………….. 81
SECTION 3 – LUBRICATION & MAINTENANCE…………………….. 83
AIR INTAKE CLEAN-OUT COVER PLATE ……………………. 99
AIR INTAKE SEAL …………………………………… 99
APPROVED HYDRAULIC OILS ……………………………. 89
EFFICIENT REACH (ER) BOOM SYSTEM ……………………. 91
EMERGENCY EXITS, CHECK MONTHLY ……………………… 85
ENGINE AIR CLEANER ………………………………… 98
AIR CLEANER MAINTENANCE …………………………100
FILTER RESTRICTION INDICATOR ……………………. 99
ENGINE AIR CLEANER UNLOADER VALVE …………………… 98
FILTER AND LUBRICATION SCHEDULE …………………….. 90
FILTERS……………………………………………. 83
CHANGING HYDRAULIC RETURN FILTERS ……………….. 94
ENGINE AIR FILTER ……………………………… 98
FUEL FILTER/WATER SEPARATOR …………………….. 92
FUEL TANK STRAINER …………………………….. 93
HYDRAULIC OIL RETURN FILTERS ……………………. 94
HYDRAULIC OIL RETURN STRAINERS/DIFFUSERS …………. 97
PILOT FILTER ………………………………….. 96
REMOVE AND REPLACE …………………………….. 92
SERVICING GUIDELINES FOR OIL FILTERS …………….. 94
FIRE PREVENTION …………………………………… 85
FUEL SHUT-OFF VALVE ……………………………….. 92
GENERAL MAINTENANCE ……………………………….. 85
HYDRAULIC OIL FILTERS ……………………………… 94
HYDRAULIC OILS ……………………………………. 89
LUBRICATE GEARBOX LOWER BEARINGS ……………………. 91
LUBRICATION SCHEDULE ………………………………. 90
NEW MACHINE MAINTENANCE ……………………………. 84
FIRST 50-100 HOUR INSPECTION AND SERVICE REPORT …… 84
INITIAL PRE-DELIVERY INSPECTION …………………. 84
TIGHTENING POINTS ……………………………… 84
Oil lost from leakage ……………………………… 84
PRESSURE SETTING PROCEDURES. See SERVICE MANUAL………… 83
PRESSURE SETTING VALUES. See SERVICE MANUAL……………. 83
PREVENTIVE MAINTENANCE SCHEDULE …………………….. 84
RETURN FILTERS ~ HYDRAULIC OIL ……………………… 94
SCHEDULED MAINTENANCE……………………………….. 83
Frequently ……………………………………. 86
8 hours ………………………………………. 86
24 HOURS ……………………………………… 86
125 HOURS …………………………………….. 86
250 HOURS …………………………………….. 87
500 HOURS …………………………………….. 87
1000 HOURS ……………………………………. 88
2000 HOURS ……………………………………. 88
SWING DRIVE GEARBOX…………………………………. 83
LUBRICATION OF LOWER BEARING ……………………. 91
TORQUE CHART, GENERAL ………………………………103
TORQUE SETTINGS, RECOMMENDED ………………………..102

IMAGES PREVIEW OF THE MANUAL:

TIGERCAT 822 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V