TIGERCAT 830 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

Description

TIGERCAT 830 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

DESCRIPTION:

TIGERCAT 830 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

INTRODUCTION :

• An Operator’s manual, Service manual and a Parts catalog are made available by Tigercat to assist the
  dealer, customer and operator in becoming familiar with the features of the 830 Feller Buncher serial
  number 8300111 to 8300189 or 830T0111 to 830T0189 if configured as a leveller.
• The operator’s manual will assist the operator with the techniques of proper and safe operation of the 830
  Feller Buncher. There is also important information regarding the safe operation of the saw head. The
  service manual contains safety and servicing procedures and a preventive maintenance schedule to
  ensure optimum machine performance.
• Section 1 in both the operator’s manual and the service manual contains safety information that must be
  followed. As well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed
  where necessary, drawing attention to possible hazards when performing certain procedures.
• Only trained personnel should be allowed to operate or work on the machine.
• The information contained in this manual is current at time of printing. Improvements to the machine are
  on-going and may not be covered, therefore in these cases contact your Tigercat dealer for the appropriate
  information.
• The phrase “and up” appearing in this manual after the serial number implies that the related information
  is current for any machine serial number HIGHER than the serial number preceding the “and up”.
• Tigercat reserves the right to make changes to the machine after this manual release date that may not
  immediately appear in this manual.

TABLE OF CONTENTS:

TIGERCAT 830 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

830 OPERATOR’S ISSUE 1.3………………………………… 1
INTRODUCTION……………………………………….. 3
NON-APPROVED FIELD PRODUCT CHANGES……………………. 4
SECTION 1 – SAFETY……………………………………… 5
CAB EXITS …………………………………………. 10
COOLING SYSTEM …………………………………….. 17
EFFICIENT REACH (ER) BOOM SYSTEM PRECAUTIONS ………….. 18
EMERGENCY CAB EXITS ………………………………… 10
ENGINE DOORS ………………………………………. 19
EXHAUST FUMES ……………………………………… 19
FELLING TREES ……………………………………… 13
FIRE PREVENTION ……………………………………. 21
FIRE PREVENTION GUIDELINES ………………………. 20
WHAT ELSE TO DO BEFORE YOU EXPERIENCE A FIRE ………. 21
WHAT TO DO AFTER A FIRE …………………………. 22
WHAT TO DO IN CASE OF A MACHINE FIRE ……………… 21
FLUID LEAKS ……………………………………….. 17
HYDRAULIC PRESSURE HAZARD …………………………… 17
LEVELLING UNDERCARRIAGE PRECAUTIONS ………………….. 12
LOOSE CLOTHING HAZARD ………………………………. 17
parking the machine ………………………………… 14
PROTECTIVE CLOTHING ………………………………… 7
SAFETY INTERLOCK SWITCHES ON CAB DOORS ……………….. 11
SAFETY PRECAUTIONS, GENERAL …………………………. 7
SAFETY PRECAUTIONS, OPERATING ……………………….. 10
SAFETY PRECAUTIONS, SERVICING ……………………….. 14
SAFETY SYMBOLS …………………………………….. 6
SIGNAL WORDS ………………………………………. 6
APPENDIX – USING HIGH SPEED DISC SAWS SAFELY………………. 23
Comments and instructions……………………………. 23
Direction of throw ……………………………… 29
High angle wrist rotation ability ………………… 30
Recognizing the Dangers …………………………. 29
Throwing long wood pieces ……………………….. 32
Dangers …………………………………………… 25
forward …………………………………………… 24
Be aware of the hazards …………………………. 24
Other instructions ……………………………… 25
Safe practices …………………………………. 25
Several types of heads involved ………………….. 24
Stored energy ………………………………….. 24
HIGH ANGLE WRIST ROTATION CAPABILITY …………………. 31
Saw Head Don’ts ……………………………………. 37
Type of Housing makes a Difference …………………… 26
SECTION 2 – CONTROLS & OPERATION…………………………. 39
AIR CONDITIONER/HEATER CONTROLS ……………………. 51
CHECKING THE AIR CONDITIONING SYSTEM ……………. 52
AIR INTAKE CLEAN-OUT COVER PLATE …………………… 71
AIR INTAKE SEAL ………………………………….. 71
AM/FM STEREO CASSETTE …………………………….. 59
AUXILIARY POWER OUTLET ……………………………. 54
BATTERY DISCONNECT – SWITCH ……………………….. 66
BOOM CONTROLS………………………………………. 39
ER (EFFICIENT REACH) BOOM OPTION ……………….. 42
SPECIAL OPERATING INSTRUCTIONS ……………… 80
MAIN BOOM ……………………………………. 42
STICK BOOM …………………………………… 42
TILT FUNCTION, FELLING HEAD ……………………. 42
BREATHER/VENT, HYDRAULIC TANK ……………………… 67
BULB TEST SWITCH …………………………………. 48
CARE OF THE MACHINE ………………………………. 81
CIGARETTE LIGHTER ………………………………… 54
CIRCUIT BREAKERS AND FUSES ………………………… 43
CLEANING A/C CONDENSER, OIL COOLER AND RADIATOR ……… 72
COOLING ASSEMBLY – OVERALL VIEW ………………… 72
CLEANING LEXAN WINDOWS ……………………………. 81
CONTROL PANEL ……………………………………. 50
COOLANT LOW – WARNING LIGHTAND HORN ………………… 47
COOLING ASSEMBLY – CLEANING ……………………….. 72
COOLING FAN – SWITCH ……………………………… 54
DIMMER CONTROL, INSTRUMENT PANEL …………………… 48
EFFICIENT REACH (ER) BOOM SYSTEM……………………… 39
HORIZONTAL REACH MOTION CHARACTERISTICS …………. 80
OPERATION OF THE BOOM …………………………. 42
EMERGENCY EXITS…………………………………….. 39
ESCAPE HATCH …………………………………. 60
ESCAPE HATCH REMOVAL/REPLACEMENT ……………….. 61
MAINTENANCE GUIDE …………………………….. 60
SIDE DOOR ……………………………………. 60
ENGINE AIR CLEANER ……………………………….. 70
FILTER RESTRICTION INDICATOR …………………… 70
ENGINE AIR CLEANER UNLOADER VALVE ………………….. 70
ENGINE AIR PRECLEANER …………………………….. 70
ENGINE ANTI-STALL – SWITCH WITH LIGHT ………………. 50
ENGINE COLD START SWITCH ………………………….. 50
ENGINE COOLANT TEMPERATURE – GAUGE AND HORN …………. 46
ENGINE HOT WATER SHUT OFF VALVES …………………… 59
ENGINE OIL PRESSURE – GAUGE ……………………….. 46
ENGINE POWER DOOR – SWITCH ………………………… 45
ENGINE RPM ………………………………………. 51
ENGINE SHUTDOWN OVERRIDE – SWITCH ………………….. 50
FELLING HEAD OPERATING INSTRUCTIONS ………………… 80
SAFETY PRECAUTIONS ……………………………. 80
FILTER BYPASS, HYD. OIL – WARNING LIGHT …………….. 48
FILTER, CHARGE PRESSURE, FAN DRIVE …………………. 69
FILTER, FRESH AIR – A/C UNIT ………………………. 59
FILTER, MEDIUM PRESSURE, PILOT SYSTEM ………………. 68
FILTER, RE-CIRCULATING AIR – A/C UNIT ………………. 58
FILTERS, HYDRAULIC OIL ……………………………. 68
FIRE SUPPRESSION SYSTEM (OPTIONAL)……………………. 40
AUTOMATIC OPERATION …………………………… 55
AVOIDING DAMAGE AND FALSE DISCHARGES DURING MACH …. 57
COMPONENT LOCATIONS …………………………… 59
DISCHARGE OF THE SYSTEM ……………………….. 55
IN CASE OF FIRE ………………………………. 56
INSPECTION OF FIRE SUPPRESSION SYSTEM …………… 56
MANUAL OPERATION ……………………………… 55
FOOT PEDALS, LEFT AND RIGHT TRACK DRIVE …………….. 43
FUEL LEVEL – GAUGE ……………………………….. 46
FUEL SHUT-OFF VALVE ………………………………. 66
FUEL TANK ……………………………………….. 66
CAPACITY …………………………………….. 66
FUSE, ALTERNATOR …………………………………. 44
FUSES AND CIRCUIT BREAKERS ………………………… 43
GRAFFITI REMOVAL …………………………………. 81
HAND FILL PUMP, HYDRAULIC OIL ……………………… 69
FILLING HYDRAULIC TANK ………………………… 69
HORN, SAFETY ALERT – SWITCH ……………………….. 53
HOT WATER SHUT OFF VALVES (ENGINE) …………………. 59
HOUR METER ………………………………………. 45
HYDRAULIC OIL FILTERS …………………………….. 68
HYDRAULIC OIL LEVEL SIGHT GAUGES …………………… 68
HYDRAULIC OIL LOW – LIGHT AND HORN …………………. 47
HYDRAULIC OIL TANK ……………………………….. 67
HYDRAULIC OIL TEMPERATURE GAUGE AND HORN ……………. 47
IGNITION KEY SWITCH ………………………………. 51
INSTRUMENT PANEL …………………………………. 45
INTERIOR LIGHTS ………………………………….. 59
JOYSTICKS, LEFT AND RIGHT HAND …………………….. 42
JUMPER BAR – POSITIVE TERMINAL …………………….. 66
KEY SWITCH ………………………………………. 51
LIGHTS, SERVICE ………………………………….. 45
LIGHTS, SERVICE – SWITCH ………………………….. 45
LIGHTS, WORK – SWITCH …………………………….. 48
MACHINE PREPARATION ………………………………. 78
SYSTEM TEST AND WARM-UP ……………………….. 78
OPERATING MACHINE ………………………………… 74
PRE-START CHECKS ……………………………… 74
RESTARTING, AFTER RUNNING OUT OF FUEL …………… 78
STARTING ENGINE ………………………………. 77
STARTING IN COLD WEATHER ………………………. 77
SYSTEM TEST AND WARM-UP ……………………….. 78
OPERATING TIPS WITH LOAD SENSING …………………… 79
OPERATOR’S SEAT (SEATS INC.) ……………………… 64
PILOT SYSTEM INTERLOCK SWITCH (FRONT DOOR) ………….. 53
PILOT SYSTEM “OFF “- PUSH BUTTON SWITCH …………….. 53
PILOT SYSTEM “OFF” LIGHT ………………………….. 48
PILOT SYSTEM “ON” LIGHT …………………………… 48
PILOT SYSTEM RESET – PUSH BUTTON SWITCH …………….. 53
POWER ENGINE DOOR – SWITCH ………………………… 45
POWER DOOR LATCH ……………………………… 45
PRECLEANER, ENGINE AIR ……………………………. 70
PUMP DRIVE GEARBOX OIL TEMP. – GAUGE ……………….. 45
RETURN FILTERS ~ HYDRAULIC OIL …………………….. 68
SAW – SWITCH …………………………………….. 54
SAW “ON” LIGHT …………………………………… 48
SEAT, OPERATOR’S (SEATS INC.) …………………….. 64
SERVICE LIGHTS …………………………………… 45
STARTING ENGINE ………………………………….. 77
STARTING IN COLD WEATHER ………………………….. 77
STEREO CASSETTE AM/FM RADIO ……………………….. 59
STOPPING ENGINE ………………………………….. 80
SWING BRAKE – SWITCH WITH LIGHT ……………………. 50
SYSTEM CIRCUIT BREAKERS AND FUSES ………………….. 43
TACHOMETER ………………………………………. 46
THROTTLE SWITCH ………………………………….. 51
TRACK DRIVE, LEFT AND RIGHT ……………………….. 43
TRACK, LOW/DRIVE – SWITCH WITH LIGHT ……………….. 53
TRAVELLING (BOOM RAISED) ………………………….. 79
VENT/BREATHER, HYDRAULIC TANK ……………………… 67
VOLTMETER ……………………………………….. 46
WINDOWS – CLEANING ……………………………….. 81
SECTION 3 – LUBRICATION & MAINTENANCE…………………….. 83
AIR INTAKE CLEAN-OUT COVER PLATE …………………….101
AIR INTAKE SEAL ……………………………………101
EFFICIENT REACH (ER) BOOM SYSTEM ……………………. 92
EMERGENCY EXITS, CHECK MONTHLY ……………………… 85
ENGINE AIR CLEANER …………………………………100
FILTER RESTRICTION INDICATOR …………………….101
ENGINE AIR CLEANER UNLOADER VALVE ……………………100
FILTER AND LUBRICATION SCHEDULE …………………….. 90
FILTERS……………………………………………. 83
CHANGING CHARGE FILTERS ………………………… 98
CHANGING HYDRAULIC RETURN FILTERS ……………….. 96
CHARGE PRESSURE FILTER, FAN DRIVE ……………….. 98
ENGINE AIR FILTER ………………………………100
FUEL FILTER/WATER SEPARATOR …………………….. 94
FUEL TANK STRAINER …………………………….. 95
HYDRAULIC OIL RETURN FILTERS ……………………. 96
HYDRAULIC OIL RETURN STRAINERS/DIFFUSERS …………. 99
PILOT CHARGE FILTER, MEDIUM PRESSURE …………….. 98
REMOVE AND REPLACE …………………………….. 94
SERVICING GUIDELINES FOR OIL FILTERS …………….. 97
FIRE PREVENTION …………………………………… 85
FUEL SHUT-OFF VALVE ……………………………….. 94
GENERAL MAINTENANCE ……………………………….. 85
HYDRAULIC OIL FILTERS ……………………………… 96
HYDRAULIC OILS ……………………………………. 89
LUBRICATE GEARBOX LOWER BEARINGS ……………………. 91
LUBRICATION POINTS DIAGRAM …………………………. 88
LUBRICATION SCHEDULE ………………………………. 90
NEW MACHINE MAINTENANCE ……………………………. 84
FIRST 50-100 HOUR INSPECTION AND SERVICE REPORT …… 84
INITIAL PRE-DELIVERY INSPECTION …………………. 84
TIGHTENING POINTS ……………………………… 84
OIL LOST FROM LEAKAGE ……………………………… 84
PRESSURE SETTING PROCEDURES. See SERVICE MANUAL………… 83
PRESSURE SETTING VALUES. See SERVICE MANUAL……………. 83
PREVENTIVE MAINTENANCE SCHEDULE …………………….. 84
PUMP DRIVE GEARBOX MAINTENANCE GUIDE ………………… 93
RETURN FILTERS ~ HYDRAULIC OIL ……………………… 96
SCHEDULED MAINTENANCE……………………………….. 83
Frequently ……………………………………. 85
8 hours ………………………………………. 86
24 HOURS ……………………………………… 86
125 HOURS …………………………………….. 87
250 HOURS …………………………………….. 87
500 HOURS …………………………………….. 88
1000 HOURS ……………………………………. 88
2000 HOURS ……………………………………. 88
LUBRICATION POINTS DIAGRAM ……………………… 88
SWING DRIVE GEARBOX…………………………………. 83
LUBRICATION OF LOWER BEARING ……………………. 91
TORQUE CHART, GENERAL ………………………………105
TORQUE SETTINGS, RECOMMENDED ………………………..104

IMAGES PREVIEW OF THE MANUAL:

TIGERCAT 830 FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V