Tigercat X870C LX870C Feller Buncher Operation Guide PDF

Description

Tigercat X870C LX870C FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

DESCRIPTION:

Tigercat X870C LX870C FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

INTRODUCTION:

An Operator’s manual, Service manual and a Parts catalog are made available by Tigercat to assist the
dealer, customer and operator in becoming familiar with the features of the X870C/LX870C Feller Bunchers
Serial numbers:-
X870C 87061701 TO 87062100
LX870C 87071701 TO 87072100

• The operator’s manual will assist the operator with the techniques of proper and safe operation of the
  X870C/LX870C Feller Buncher. There is also important information regarding the safe operation of the saw
  head.
• The service manual contains safety and servicing procedures and a preventive maintenance schedule to
  ensure optimum machine performance.
• Section 1 in both the operator’s manual and the service manual contains safety information that must be
  followed. As well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed
  where necessary, drawing attention to possible hazards when performing certain procedures.
• Only trained personnel should be allowed to operate or work on the machine.
• The information contained in this manual is current at time of printing. Improvements to the machine are
  on-going and may not be covered, therefore in these cases contact your Tigercat dealer for the appropriate
  information.
• The phrase “and up” appearing in this manual after the serial number implies that the related information is
  current for any machine serial number HIGHER than the serial number preceding the “and up”.
• Tigercat reserves the right to make changes to the machine after this manual release date that may not
  immediately appear in this manual.

TABLE OF CONTENTS:

Tigercat X870C LX870C FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD

X870C LX870C OPERATOR ISSUE 3.0……………………………… 1
INTRODUCTION…………………………………………… 3
NON-APPROVED FIELD PRODUCT CHANGES……………………….. 5
SECTION 1 – SAFETY…………………………………………. 7
BATTERY DISCONNECT SWITCH ………………………………. 19
Battery safety ………………………………………… 12
CAB EXITS …………………………………………….. 13
COOLING SYSTEM ………………………………………… 22
EMERGENCY CAB EXITS ……………………………………. 13
ENGINE DOORS ………………………………………….. 24
ER BOOM SYSTEM PRECAUTIONS ……………………………… 23
EXHAUST FUMES …………………………………………. 24
FELLING TREES …………………………………………. 18
FIRE PREVENTION ……………………………………….. 27
DRY CHEMICAL CLEANUP PROCEDURES ……………………… 31
FIRE PREVENTION GUIDELINES ………………………….. 27
WHAT TO DO AFTER A MACHINE FIRE HAS OCCURRED ………….. 30
WHAT TO DO TO PREPARE FOR A MACHINE FIRE ……………… 28
WHAT TO DO WHEN A MACHINE FIRE OCCURS ………………… 29
FLUID INJECTION INJURY …………………………………. 25
FLUID LEAKS …………………………………………… 22
GREASE INJECTION INJURY ………………………………… 26
HAZARD ZONE …………………………………………… 9
HYDRAULIC PRESSURE HAZARD ………………………………. 22
LOOSE CLOTHING HAZARD ………………………………….. 22
machine stability and traction ………………………….. 15
PARKING HAZARDS ……………………………………….. 19
PROTECTIVE CLOTHING ……………………………………. 8
SAFETY INTERLOCK SWITCHES ON CAB DOORS …………………… 14
SAFETY PRECAUTIONS, GENERAL …………………………….. 8
SAFETY PRECAUTIONS, OPERATING …………………………… 13
SAFETY PRECAUTIONS, SERVICING …………………………… 20
SAFETY SYMBOLS ………………………………………… 8
SIGNAL WORDS ………………………………………….. 8
WELDING, PRIOR TO ……………………………………… 21
Working with oil ………………………………………. 10
APPENDIX – USING HIGH SPEED DISC SAWS SAFELY………………….. 33
COMMENTS AND INSTRUCTIONS……………………………….. 33
DIRECTION OF THROW …………………………………. 39
HIGH ANGLE WRIST ROTATION ABILITY ……………………. 40
RECOGNIZING THE DANGERS …………………………….. 39
THROWING LONG WOOD PIECES …………………………… 42
DANGERS ………………………………………………. 35
FORWARD ………………………………………………. 34
BE AWARE OF THE HAZARDS …………………………….. 34
OTHER INSTRUCTIONS …………………………………. 35
SAFE PRACTICES …………………………………….. 35
SEVERAL TYPES OF HEADS INVOLVED ……………………… 34
STORED ENERGY ……………………………………… 34
HIGH ANGLE WRIST ROTATION CAPABILITY …………………….. 41
SAW HEAD DON’TS ……………………………………….. 47
TYPE OF HOUSING MAKES A DIFFERENCE ………………………. 36
SECTION 2 – CONTROLS & OPERATION…………………………….. 49
ACCUMULATING ARMS CONTROL, JOYSTICK ……………………. 53
ACCUMULATION MODE FEATURE……………………………….. 49
ACCUMULATION MODE FEATURE DESCRIPTION ………………. 55
ACCUMULATION MODES………………………………….. 49
AUTOMATIC ACCUMULATION MODE ……………………. 56
SIMULTANEOUS ACCUMULATION MODE …………………. 56
STANDARD ACCUMULATION MODE …………………….. 55
INFORMATION MESSAGES ………………………………103
MODE SELECTION SWITCH …………………………….. 55
AIR CONDITIONER/HEATER CONTROLS ……………………….. 70
AM/FM STEREO CD ……………………………………… 79
AMEREX FIRE SUPPRESSION SYSTEM (OPTIONAL) ………………. 73
ANTI-STALL – SWITCH WITH LIGHT ………………………… 68
ATTACHMENT ELECTRONIC ADJUSTMENT PROCEDURE ……………..109
AUXILIARY POWER OUTLET ……………………………….. 72
BATTERY BOOSTER JUMPER PLUG …………………………… 61
BATTERY DISCONNECT SWITCH …………………………….. 66
BOOM CONTROLS………………………………………….. 49
BOOM, FORWARD/BACK ……………………………….. 53
BOOM, UP/DOWN ……………………………………. 53
TILT FUNCTION, FELLING HEAD ……………………….. 53
CARE OF THE MACHINE …………………………………..137
CASE DRAIN STRAINERS ………………………………….121
CIGARETTE LIGHTER ……………………………………. 72
CLAMP ARMS CONTROL, JOYSTICK ………………………….. 53
CLEANING………………………………………………. 49
REMOVAL OF ANTI-CORROSION SPRAY (if applicable) ………138
CLEANING A/C CONDENSER, OIL COOLER, RADIATOR………………. 49
AND CHARGE AIR COOLER ……………………………..124
CLEANING INSTRUCTIONS FOR LEXAN WINDOWS …………………138
COMPUTER CONTROL SYSTEM (IQAN MDM DISPLAY) ……………… 82
ALTERNATE MENUS ………………………………….. 84
CYCLE COUNTER ………………………………… 84
MACHINE SERVICE – HYDRAULIC OIL ………………… 85
TREE COUNTER …………………………………. 84
CONTROL SYSTEM OVERVIEW …………………………… 82
DIAGNOSTICS ADJUSTMENT MENUS ………………………. 86
ADJUST DATE TIME SETTINGS (SETTINGS MENU) ……….. 91
ADJUST FUNCTION PARAMETERS (PROPERTIES MENU) …….. 92
ADJUST LCD DISPLAY BRIGHTNESS (SETTINGS MENU) ……. 89
ADJUST OUTPUTS (PROPERTIES MENU) ……………….. 96
LANGUAGE SETTINGS (SETTINGS MENU) ………………. 90
MENU DESCRIPTIONS …………………………….. 87
MENU OPERATION ……………………………….. 88
SOUND SETTINGS (SETTINGS MENU) …………………. 90
ELECTRONIC ADJUSTMENT PROCEDURE, ATTACHMENT ………….109
ACCUMULATING ARM ………………………………109
ADJUSTABLE ATTACHMENT FUNCTIONS CHART ……………110
CLAMP ARM …………………………………….109
EXAMPLE – WRIST FUNCTION ADJUSTMENT ……………110
WRIST ………………………………………..109
ELECTRONIC ADJUSTMENT PROCEDURE, LEVELLING …………..104
ADJUSTING CYLINDER TRACKING …………………….106
ADJUSTING FORWARD/REAR LEVELLING SPEED …………..105
CHECKING LEVELLING SPEED (CYLINDER CYCLE TIMES) ….104
SYSTEM COMPONENTS ………………………………… 82
SYSTEM WARNING MESSAGES …………………………… 98
INFORMATION MESSAGES …………………………..101
MODULE IS OFFLINE SYSTEM WARNING ……………….. 98
WARNING MESSAGES ……………………………… 98
CONTROL PANEL ……………………………………….. 68
COOLING ASSEMBLY ……………………………………..124
cooling assembly COMPONENTS ……………………………124
COOLING FAN – SWITCH …………………………………. 72
DOORS, SERVICE ACCESS …………………………………116
EMERGENCY EXITS………………………………………… 50
CHECKING PROCEDURE FOR ESCAPE HATCH ………………… 80
CHECKING PROCEDURE FOR SIDE DOOR: ………………….. 80
ESCAPE HATCH …………………………………….. 79
ESCAPE HATCH REMOVAL/REPLACEMENT …………………… 80
MAINTENANCE GUIDE ………………………………… 80
SIDE DOOR ……………………………………….. 79
ENGINE AIR CLEANER ……………………………………122
FILTER RESTRICTION INDICATOR ……………………….123
ENGINE AIR CLEANER UNLOADER VALVE ………………………122
ENGINE AIR PRECLEANER …………………………………122
ENGINE ANTI-STALL – SWITCH WITH LIGHT ………………….. 68
ENGINE HOT WATER SHUT OFF VALVES ………………………. 78
ENGINE, RESTARTING AFTER ENGINE RUN OUT OF FUEL …………133
ENGINE, STARTING ……………………………………..131
ENGINE, STARTING, COLD WEATHER …………………………132
ENGINE, STOPPING ……………………………………..134
ER BOOM SYSTEM, SPECIAL OPERATING INSTRUCTIONS …………..137
FELLING HEAD OPERATING INSTRUCTIONS …………………….136
SAFETY PRECAUTIONS ………………………………..136
FILTER, FRESH AIR – A/C UNIT ………………………….. 78
FILTER, RE-CIRCULATING AIR – A/C UNIT ………………….. 78
FILTERS. See also SECTION 3……………………………… 50
CHARGE PILOT FILTER ……………………………….121
FUEL TANK STRAINERS ……………………………….118
FIRE SUPPRESSION SYSTEM (OPTIONAL)……………………….. 50
AUTOMATIC OPERATION ………………………………. 73
AVOIDING DAMAGE AND FALSE DISCHARGES DURING MACH …….. 76
COMPONENT LOCATIONS ………………………………. 76
DISCHARGE OF THE SYSTEM …………………………… 74
IN CASE OF FIRE ………………………………….. 74
INSPECTION OF FIRE SUPPRESSION SYSTEM ………………. 75
MANUAL OPERATION …………………………………. 73
FOOT PEDALS, TRACK DRIVE ……………………………… 57
FUEL HEATER SWITCH …………………………………… 69
FUEL TANK……………………………………………… 51
COMPONENTS ……………………………………….118
FUEL TANK SHUT-OFF VALVES ……………………………..118
FUEL TANKS …………………………………………..118
GRAFFITI REMOVAL ……………………………………..138
HORN, SAFETY ALERT – SWITCH …………………………… 71
HOT WATER SHUT OFF VALVES (ENGINE) …………………….. 78
HYDRAULIC OIL TANK……………………………………… 51
FILTER RESTRICTION PRESSURE SWITCH ………………….120
FILTER/STRAINER SERVICE ……………………………120
HYDRAULIC FILL PUMP ……………………………….119
HYDRAULIC OIL FILTERS ……………………………..120
HYDRAULIC OIL HEATER (OPTIONAL) …………………….121
IGNITION KEY SWITCH ………………………………….. 69
INSTRUCTIONS, VEHICLE MOVING …………………………..139
INSTRUMENT PANEL …………………………………….. 62
BATTERY DISCONNECT – SWITCH ……………………….. 66
BULB TEST – SWITCH ………………………………. 67
ENGINE DIAGNOSTICS CONNECTION ……………………… 62
ENGINE DISPLAY AND DIAGNOSTICS MODULE ………………. 63
ENGINE POWER DOOR – SWITCH ………………………… 62
FILTER BYPASS, HYD. OIL – WARNING LIGHT …………….. 65
FUEL LEVEL – GAUGE ……………………………….. 63
HYDRAULIC OIL LOW – LIGHT AND HORN …………………. 64
HYDRAULIC OIL TEMPERATURE – GAUGE, LIGHT AND HORN ……. 64
LIGHTS, SERVICE – SWITCH ………………………….. 62
MASTER ALARM …………………………………….. 62
PILOT SYSTEM “OFF” – LIGHT ………………………… 65
PILOT SYSTEM “ON” – LIGHT …………………………. 65
POWER ENGINE DOOR – SWITCH ………………………… 62
PUMP DRIVE GEARBOX OIL TEMP. – GAUGE ……………….. 63
ROOF/DOOR OPEN – LIGHT ……………………………. 66
SAW “ON” – LIGHT …………………………………. 65
SERVICE LIGHTS ON – WARNING LIGHT ………………….. 66
SERVICE MODE – SWITCH …………………………….. 67
TACHOMETER – GAUGE ……………………………….. 64
INTERIOR LIGHTS ……………………………………… 79
INTERMITTENT SAW …………………………………….. 94
JOYSTICKS, LEFT AND RIGHT HAND ………………………… 53
KEY SWITCH ………………………………………….. 69
LEVELLING CONTROLS, JOYSTICKS …………………………. 54
LEVELLING ELECTRONIC ADJUSTMENT PROCEDURE ……………….104
LIGHTS, INTERIOR …………………………………….. 79
LIGHTS, SERVICE ……………………………………… 62
LOAD SENSING, OPERATING TIPS …………………………..136
MACHINE PREPARATION…………………………………….. 52
SYSTEM TEST AND WARM-UP ……………………………135
MASTER ALARM ………………………………………… 62
MOVING, INSTRUCTIONS ………………………………….139
OPERATING MACHINE …………………………………….126
PRE-START CHECKS ………………………………….126
OPERATING TIPS WITH LOAD SENSING ……………………….136
OPERATOR’S SEAT ………………………………………114
PILOT SYSTEM INTERLOCK SWITCH (FRONT DOOR) ……………… 70
PILOT SYSTEM “OFF “- PUSH BUTTON SWITCH ………………… 70
PILOT SYSTEM RESET – PUSH BUTTON SWITCH ………………… 70
POWER ENGINE DOOR – SWITCH ……………………………. 62
PRESSURIZED WATER SYSTEM ……………………………… 77
REMOVAL OF ANTI-CORROSION SPRAY (if applicable) ………….138
ROOF/DOOR OPEN – LIGHT ……………………………….. 66
SAW – SWITCH ………………………………………… 71
SAW CONTROL SYSTEM SETTING ……………………………. 94
SERVICE ACCESS DOORS ………………………………….116
SERVICE LIGHTS ………………………………………. 62
STARTING ENGINE………………………………………… 52
CUMMINS QSL9 ……………………………………..131
STEREO AM/FM RADIO/CD ………………………………… 79
SWING BRAKE – SWITCH WITH LIGHT ……………………….. 68
SWING CONTROL, JOYSTICK ………………………………. 53
SYSTEM FUSES AND RELAYS ………………………………. 60
THROTTLE SWITCH ……………………………………… 69
TRACK COMPONENTS……………………………………….. 52
MEASURING TRACK SAG ……………………………….129
TRACK DRIVE, FOOT PEDALS ……………………………… 57
TRACK, LOW/DRIVE – SWITCH WITH LIGHT …………………… 71
TRAVEL SPEED CONTROL LEVER ……………………………. 57
TRAVELLING (BOOM RAISED) ……………………………..136
VEHICLE MOVING INSTRUCTIONS ……………………………139
WARNING LIGHTS. See INSTRUMENT PANEL……………………… 52
WINDOWS, CLEANING …………………………………….138
WORK LIGHTS SWITCH …………………………………… 68
WRIST CONTROL, JOYSTICKS ……………………………… 53
SECTION 3 – LUBRICATION & MAINTENANCE…………………………141
AIR CONDITIONING SYSTEM, CHECKING THE SYSTEM ……………..156
AIR INTAKE MAINTENANCE …………………………………170
APPROVED HYDRAULIC OILS ………………………………..152
CASE DRAIN STRAINERS …………………………………..168
CHECKING THE AIR CONDITIONING SYSTEM …………………….156
EMERGENCY EXITS, CHECK MONTHLY ………………………….145
ENGINE ARI CLEANER MAINTENANCE ………………………….170
ER BOOM SYSTEM ………………………………………..154
FILTER AND LUBRICATION SCHEDULE …………………………153
FILTERS………………………………………………..141
CHANGING CHARGE FILTERS …………………………….166
CHARGE PILOT FILTER ………………………………..166
FUEL TANK STRAINERS ………………………………..159
HYDRAULIC OIL PRE-FILL FILTER ……………………….163
HYDRAULIC OIL RETURN STRAINERS ………………………167
HYDRAULIC TANK BREATHER …………………………….168
SERVICING GUIDELINES FOR OIL FILTERS …………………162
FIRE PREVENTION ……………………………………….146
FUEL TANK………………………………………………141
COMPONENTS ………………………………………..159
STRAINER ………………………………………….160
GENERAL MAINTENANCE ……………………………………145
HYDRAULIC OIL FILTERS ………………………………….164
HYDRAULIC OILS, APPROVED ……………………………….152
HYDRAULIC TANK PRESSURIZATION INSTRUCTIONS ……………….162
LUBRICATION POINTS DIAGRAM, LEVELLER …………………….149
LUBRICATION SCHEDULE …………………………………..153
NEW MACHINE MAINTENANCE ………………………………..142
FIRST 50-100 HOUR INSPECTION REPORT ………………….142
INITIAL PRE-DELIVERY INSPECTION ……………………..142
TIGHTENING POINTS ………………………………….142
OIL LOST FROM LEAKAGE ………………………………….145
OIL SAMPLE COLLECTION PROCEDURES ………………………..144
OIL SAMPLING PROGRAM …………………………………..143
PRESSURE AND SPEED SETTINGS …………………………….178
PREVENTIVE MAINTENANCE SCHEDULE …………………………142
PUMP DRIVE GEARBOX MAINTENANCE GUIDE …………………….169
SCHEDULED MAINTENANCE……………………………………141
FREQUENTLY ………………………………………..147
8 HOURS …………………………………………..147
24 HOURS ………………………………………….148
125 HOURS …………………………………………148
250 HOURS …………………………………………148
500 HOURS …………………………………………149
1000 HOURS ………………………………………..150
2000 HOURS ………………………………………..150
LUBRICATION POINTS DIAGRAM, LEVELLER …………………149
SWING DRIVE LUBRICATION………………………………….141
GEARBOX LOWER BEARINGS …………………………….155
GEARBOX UPPER GEARING ………………………………155
SWING PINION AND SWING BEARING ………………………155
TORQUE CHART ………………………………………….172
TORQUE CHART, GENERAL ………………………………….173
TORQUE, FLUID CONNECTIONS ………………………………174
WEIGHTS OF COMMERCIAL WOOD ……………………………..177

IMAGES PREVIEW OF THE MANUAL:

TIGERCAT X870C LX870C FELLER BUNCHER OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V