Wacker Neuson DPU 7060 Fe Fet Vibrating plate Operator’s Manual – PDF DOWNLOAD

Description

Wacker Neuson DPU 7060 Fe Fet Vibrating plate Operator’s Manual – PDF DOWNLOAD

FILE DETAILS:

Wacker Neuson DPU 7060 Fe Fet Vibrating plate Operator’s Manual – PDF DOWNLOAD

Language : English
Pages : 98
Downloadable : Yes
File Type : PDF
Size: 2.91 MB

IMAGES PREVIEW OF THE MANUAL:

Contact us: [email protected]

https://vimeo.com/773001286

DESCRIPTION:

Wacker Neuson DPU 7060 Fe Fet Vibrating plate Operator’s Manual – PDF DOWNLOAD

Foreword
This operator’s manual contains information and procedures for the safe operation
and maintenance of your Wacker Neuson machine. In the interest of your
own safety and to prevent accidents, you should carefully read through the safety
information, familiarize yourself with it and observe it at all times.
This operator’s manual is not a manual for extensive maintenance and repair
work. Such work should be carried out by Wacker Neuson service or authorized
specialists.
The safety of the operator was one of the most important aspects taken into consideration
when this machine was designed. Nevertheless, improper use or incorrect
maintenance can pose a risk. Please operate and maintain your Wacker
Neuson machine in accordance with the instructions in this operator’s manual.
Your reward will be troublefree operation and a high degree of availability.
Defective machine parts must be replaced immediately!
Please contact your Wacker Neuson representative if you have any questions
concerning operation or maintenance.

TABLE OF CONTENTS:

Wacker Neuson DPU 7060 Fe Fet Vibrating plate Operator’s Manual – PDF DOWNLOAD

1 Foreword …………………………………………………………………………………………………….. 6
2 Introduction ………………………………………………………………………………………………… 7
2.1 Means of representation for this operator’s manual………………………………………………. 7
2.2 Wacker Neuson representative………………………………………………………………………….. 8
2.3 Described machine types………………………………………………………………………………….. 8
2.4 Identification of the machine ……………………………………………………………………………… 9
3 Safety ………………………………………………………………………………………………………..10
3.1 Principle ……………………………………………………………………………………………………….. 10
3.2 Qualification of the operating personnel…………………………………………………………….. 13
3.3 Protective gear ………………………………………………………………………………………………. 14
3.4 Transport………………………………………………………………………………………………………. 15
3.5 Operating safety…………………………………………………………………………………………….. 16
3.6 Safety during the operation of vibratory plates……………………………………………………. 18
3.7 Safety when operating remote-controlled machines ……………………………………………. 19
3.8 Safety during the operation of combustion engines …………………………………………….. 20
3.9 Safety during the operation of hydraulic machines ……………………………………………… 22
3.10 Maintenance………………………………………………………………………………………………….. 22
3.11 Safety devices……………………………………………………………………………………………….. 24
4 Safety and information labels ……………………………………………………………………..25
5 Scope of delivery ………………………………………………………………………………………. 27
6 Structure and function ……………………………………………………………………………….28
6.1 Application…………………………………………………………………………………………………….. 28
6.2 Description ……………………………………………………………………………………………………. 28
6.2.1 Principle of the machine………………………………………………………………………. 28
6.2.2 Remote control…………………………………………………………………………………… 28
6.2.3 Infrared system ………………………………………………………………………………….. 28
6.2.4 Receiving area and proximity area of the machine ………………………………….. 29
6.2.5 Speed control unit (only certain machine types) ……………………………………… 30
6.3 Functional description …………………………………………………………………………………….. 31
7 Components and operator’s controls …………………………………………………………. 33
7.1 Components and operator’s controls of the machine…………………………………………… 33
7.2 Remote control components and operator’s controls…………………………………………… 36
8 Transport ………………………………………………………………………………………………….. 38
8.1 Lifting eyes and tie-down lugs………………………………………………………………………….. 39
8.2 Lifting the machine by the central suspension and transporting ……………………………. 39
9 Initial start up ……………………………………………………………………………………………. 40
9.1 Removing/installing support plates …………………………………………………………………… 40
4 0217499IVZ.fm
10 Use and operation ……………………………………………………………………………………… 42
10.1 Prior to starting the machine…………………………………………………………………………….. 42
10.1.1 Checks before startup …………………………………………………………………………. 42
10.2 Starting up …………………………………………………………………………………………………….. 43
10.3 Operating the machine ……………………………………………………………………………………. 46
10.3.1 Machine’s directions of movement ………………………………………………………… 46
10.3.2 Note on the machine’s directions of movement……………………………………….. 47
10.3.3 Compacting on a slope………………………………………………………………………… 49
10.3.4 Moving and stopping the machine…………………………………………………………. 50
10.4 Operate machine with speed control unit (only certain machine types) ………………….. 50
10.5 Decomissioning ……………………………………………………………………………………………… 52
10.6 Recharging remote control battery ……………………………………………………………………. 54
10.6.1 Charging the battery with the coiled helix cable ………………………………………. 54
10.6.2 Charging battery with external charger…………………………………………………… 56
10.7 Setting transmission channel……………………………………………………………………………. 57
11 Maintenance ……………………………………………………………………………………………… 62
11.1 Maintenance schedule…………………………………………………………………………………….. 62
11.1.1 One-time maintenance after initial operation…………………………………………… 62
11.1.2 Daily maintenance tasks………………………………………………………………………. 63
11.1.3 Regular maintenance ………………………………………………………………………….. 64
11.2 Maintenance work ………………………………………………………………………………………….. 65
11.2.1 Cleaning machine and remote control……………………………………………………. 65
11.2.2 Topping up with fuel ……………………………………………………………………………. 66
11.2.3 Checking motor oil level and topping up engine oil ………………………………….. 68
11.2.4 Changing the engine oil……………………………………………………………………….. 70
11.2.5 Checking air cleaner and cleaning or replacing air cleaner cartridge………….. 72
11.2.6 Checking exciter oil level and topping up exciter oil …………………………………. 73
11.2.7 Checking hydraulic oil level and refilling hydraulic oil……………………………….. 75
11.2.8 Checking the battery acid level……………………………………………………………… 76
11.2.9 Replacing the V-belt ……………………………………………………………………………. 78
12 Malfunctions ……………………………………………………………………………………………… 81
12.1 Machine malfunctions……………………………………………………………………………………… 81
12.2 Malfunction messages on the control panel ……………………………………………………….. 82
12.3 Malfunction messages in the control lamps of the remote control………………………….. 84
12.4 Eliminating malfunctions………………………………………………………………………………….. 85
12.4.1 Jumpstart with a donor battery ……………………………………………………………… 85
13 Disposal ……………………………………………………………………………………………………. 88
13.1 Disposal of batteries ……………………………………………………………………………………….. 88
14 Accessories ………………………………………………………………………………………………. 89
14.1 Battery ………………………………………………………………………………………………………….. 89
0217499IVZ.fm 5
14.2 Support plates……………………………………………………………………………………………….. 89
15 Technical data ……………………………………………………………………………………………90
15.1 DPU 7060Fe, DPU 7060Fet…………………………………………………………………………….. 90
15.2 Combustion engine ………………………………………………………………………………………… 92
16 Emission control systems information and warranty ………………………………….. 94
EC Declaration of Conformity ……………………………………………………………………..95

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V