Wacker Neuson G20 (50 Hz) G25 (60 Hz) Mobile Generator Operator’s Manual – PDF DOWNLOAD

Description

Wacker Neuson G20 (50 Hz) G25 (60 Hz) Mobile Generator Operator’s Manual – PDF DOWNLOAD

FILE DETAILS:

Wacker Neuson G20 (50 Hz) G25 (60 Hz) Mobile Generator Operator’s Manual – PDF DOWNLOAD

Language : English
Pages : 84
Downloadable : Yes
File Type : PDF
Size: 8.85 MB

IMAGES PREVIEW OF THE MANUAL:

Questions? Email us: [email protected]

https://vimeo.com/773323966

DESCRIPTION:

Wacker Neuson G20 (50 Hz) G25 (60 Hz) Mobile Generator Operator’s Manual – PDF DOWNLOAD

Type G20, G25
Document 5200025502
Date 1215
Version 01
Language EN

Foreword:
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
Machine
identification
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
Serial number
(S/N)
For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.
Machine Item Number
G 20 (50 Hz) 5200016628, 5200022625

TABLE OF CONTENTS:

Wacker Neuson G20 (50 Hz) G25 (60 Hz) Mobile Generator Operator’s Manual – PDF DOWNLOAD

Foreword……………………………………………………. 3
1 Safety Information…………………………………………. 9
1.1 Signal Words Used in this Manual……………………….. 9
1.2 Machine Description and Intended Use…………………….10
1.3 Safety Guidelines for Operating the Machine………………11
1.4 Service Safety………………………………………..13
1.5 Operator Safety while Using Internal Combustion Engines……15
1.6 Safety Guidelines for Mobile Generators………………….16
1.7 Safety Guidelines for Lifting the Machine………………..17
2 Label Locations…………………………………………….18
2.1 Label Meanings………………………………………..20
3 Lifting and Transporting…………………………………….28
3.1 Lifting the Machine……………………………………28
3.2 Preparing the Machine for Transport on a Truck or Trailer….29
4 Machine Setup………………………………………………30
4.1 Preparing the Machine for First Use……………………..30
4.2 Positioning the Machine………………………………..31
4.3 Grounding the Generator………………………………..33
4.4 Recommended Fuel………………………………………34
4.5 Refueling the Machine (Deep Sea Controller)………………35
5 Operation, Control, and Component Locations……………………36
5.1 Control / Component Locations…………………………..36
5.2 Control Panel Components……………………………….37
6 Operation (Deep Sea Controller: DSE 7310)……………………..38
6.1 Main Circuit Breaker…………………………………..38
6.2 Genset Controller Power Switch………………………….39
6.3 Deep Sea Controller Buttons/Functions……………………40
6.4 Genset Controller Alarms and Shut-Down Conditions…………42
6.5 Before Starting the Machine…………………………….44
6.6 Starting and Running the Generator………………………45
6.7 Stopping the Generator…………………………………47
6.8 Emergency Stop Switch………………………………….48
6.9 Engine and Generator Monitoring…………………………49
7 Working with Deep Sea Controller: DSE 7310…………………….50
7.1 Introduction………………………………………….50
7.2 Navigating the Menus…………………………………..51
7.3 Adjusting Screen Contrast………………………………53
7.4 Changing the Language………………………………….54
7.5 How to Reset the Maintenance Timer………………………55
8 How to Connect Loads (380–400V)………………………………56
8.1 Lug Terminal Connection Diagrams………………………..56
8.2 Connecting 380–400V, 3-Phase and Single-Phase Loads……….57
9 Using Remote Start Capabilities………………………………58
9.1 Remote Run Terminal Block………………………………58
9.2 Remote Transfer Switch…………………………………59
9.3 Preparing for Automatic/Remote Start-Up (Deep Sea)………..60
10 General Maintenance………………………………………..62
10.1 Periodic Maintenance Schedule………………………….62
10.2 Preparing for Maintenance……………………………..63
10.3 Cleaning the Machine………………………………….63
10.4 Inspecting the Machine………………………………..64
10.5 Checking and Draining the Containment System…………….65
10.6 Checking the Exhaust System……………………………66
10.7 Maintaining the Battery……………………………….67
10.8 Storage……………………………………………..68
10.9 Machine Disposal / Decommissioning……………………..69
11 Maintenance Tier 4i Engines: Isuzu…………………………..70
12 Troubleshooting……………………………………………73
13 Technical Data…………………………………………….74
13.1 Engine: G 20…………………………………………74
13.2 Generator: G 20………………………………………75
13.3 Dimensions: G 20 / G 25……………………………….76
14 Schematics, Machines with Deep Sea Controller………………… 0
14.1 Fuses……………………………………………….77

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V