2011 Subaru Legacy & Outback Service Repair Manual – Complete Workshop Guide

Description

2011 Subaru Legacy & Outback Service Repair Manual

This complete 2011 Subaru Legacy and Outback service repair manual provides Subaru service personnel and experienced mechanics with the essential information and data required for correct maintenance and repair. Covering the 2011MY BM***** and BR***** model series, this workshop guide includes procedures for maintenance, disassembly, reassembly, inspection, adjustment, and diagnostics across every major vehicle system.

File Details

• Manual Type: Service Manual / Workshop Guide
• Brand: Subaru
• Models Covered: Legacy, Outback
• Model Year: 2011 (2011MY)
• Applicable Model Codes: BM, BR
• Document Numbers: G2470BE1, G2470BE3, G2470BE4
• Language: English
• Page Count: 5950
• File Format: PDF

Chapters Covered

• General Information — Foreword, How to Use This Manual, Specifications, Precaution, Note, Identification, Recommended Materials
• Pre-delivery Inspection — Static checks, engine running checks, dynamic tests, appearance
• Periodic Maintenance Services — General description, schedule, engine oil, oil filter, spark plugs, V-belt, timing belt, fuel line, fuel filter, air cleaner, cooling system, engine coolant, clutch, transmission gear oil, ATF, CVTF, differential gear oil, brake line, brake fluid, disc brake pad, brake lining, suspension, wheel bearing, axle boots, tire rotation, steering, A/C filter
• Fuel Injection (Fuel Systems) — Throttle body, intake manifold, engine coolant temperature sensor, crankshaft position sensor, camshaft position sensor, knock sensor, throttle position sensor, mass air flow sensor, manifold absolute pressure sensor, EGR valve, fuel injector, tumble generator valve, oil flow control solenoid valve, wastegate control solenoid valve, front oxygen (A/F) sensor, rear oxygen sensor, ECM, main relay, fuel pump relay, electronic throttle control relay, fuel pump control unit, fuel tank, fuel filler pipe, fuel pump, fuel level sensor, fuel sub level sensor, fuel filter, fuel damper, fuel delivery and evaporation lines
• Emission Control — Front catalytic converter, rear catalytic converter, EGR valve, canister, purge control solenoid valve, fuel level sensor, fuel temperature sensor, fuel sub level sensor, fuel tank pressure sensor, drain filter, drain valve, PCV hose assembly, PCV valve, shut valve
• Intake (Induction) — Air cleaner element, air cleaner case, air intake boot, air intake duct, intake duct, intercooler, turbocharger, oil catch tank, scavenge pump, air by-pass valve, resonator chamber
• Mechanical — Compression, idle speed, ignition timing, intake manifold vacuum, engine oil pressure, fuel pressure, valve clearance, engine assembly, engine mounting, preparation for overhaul, V-belt, crank pulley, timing belt cover, timing belt, cam sprocket, crank sprocket, valve rocker assembly, camshaft, cylinder head, cylinder block, intake and exhaust valves, piston, connecting rod, crankshaft
• Exhaust — Front exhaust pipe, center exhaust pipe, rear exhaust pipe, muffler
• Cooling — Radiator fan system, engine coolant, water pump, thermostat, radiator, radiator cap, radiator main fan, radiator sub fan, reservoir tank
• Lubrication — Oil pressure system, engine oil, oil pump, oil pan and strainer, oil pressure switch, engine oil cooler, oil catch tank, scavenge pump, oil pipe, engine oil filter, oil level switch
• Speed Control Systems — Accelerator pedal
• Ignition — Spark plug, ignition coil
• Starting/Charging Systems — Starter, generator, battery
• Engine (Diagnostics) — Basic diagnostic procedure, check list for interview, general description, electrical component location, ECM I/O signal, engine condition data, data link connector, general scan tool, Subaru Select Monitor, read DTC, inspection mode, drive cycle, clear memory mode, system operation check mode, malfunction indicator light, diagnostics for engine starting failure, DTC list, diagnostic procedures, general diagnostic table
• General Description — DTC list, DTC detecting criteria

The 2011 Subaru Legacy & Outback Service Repair Manual is organised into sections that break down into component-level procedures. Each section provides the specification, maintenance, and diagnostic information for the relevant components, with exploded illustrations showing tightening torques, grease points, and special tool usage. This structure allows a technician to locate the exact procedure needed for any repair task on the 2011 Legacy or Outback, whether working on the 2.5L SOHC non-turbo, 2.5L DOHC turbo, or 3.6L DOHC non-turbo engine platform.

What This Manual Enables You to Do

With this 2011 Subaru Legacy & Outback service manual, you can perform the full range of maintenance and repair operations on these vehicles. The manual covers everything from routine periodic maintenance — engine oil and filter changes, spark plug replacement, timing belt service, brake inspections, and fluid replacements — through to complex engine and transmission overhauls. The engine diagnostics section provides the complete diagnostic procedures for the OBD-II system, including DTC reading, freeze frame data, drive cycles, and inspection modes, allowing you to pinpoint faults accurately.

IMAGES PREVIEW

For major mechanical work, the manual includes detailed removal, installation, disassembly, and assembly procedures for the engine, cylinder heads, camshafts, timing belt, crankshaft, pistons, and connecting rods. The transmission sections cover the 6MT manual, 5AT automatic, and CVT continuously variable transmission, with gear ratios, reduction ratios, and service procedures. Suspension, steering, brake, and body electrical systems are all documented with the specifications and procedures needed to complete the job correctly.

Why This Manual Matters

Having the correct procedures and specifications is critical when servicing a Subaru Legacy or Outback. Torque values, clearances, adjustment limits, and diagnostic thresholds are all engine- and model-specific. Using the wrong specification can lead to premature failure, drivability problems, or damage to expensive components. This 2011 Subaru Legacy & Outback service manual provides the exact figures and sequences that Subaru service personnel use, ensuring that every repair is done to the manufacturer’s standard.

The manual includes tightening torques for every fastener, service limits for wear items, diagnostic trouble code detection criteria, and step-by-step diagnostic flowcharts. Whether you are a professional mechanic working in a shop or a knowledgeable owner performing your own maintenance, having the complete workshop guide for your 2011 Legacy or Outback is essential for safe and effective repairs.

Instant PDF Delivery

This 2011 Subaru Legacy & Outback Service Repair Manual is delivered as an instant PDF download. There is no shipping, no waiting for a physical book, and no risk of a lost or damaged copy. The PDF can be viewed on any computer, tablet, or smartphone, and specific pages can be printed for use in the workshop. The complete 5950-page manual is available immediately after purchase, giving you instant access to the full range of technical information for your 2011 Legacy or Outback.