2016-2018 CHEVROLET SILVERADO COMPLETE SERVICE MANUAL

Description

2016-2018 CHEVROLET SILVERADO COMPLETE SERVICE MANUAL – PDF DOWNLOAD

IMAGE PREVIEW:

DESCRIPTION:

2016-2018 CHEVROLET SILVERADO COMPLETE SERVICE MANUAL – PDF DOWNLOAD

• Hold the cylinder (1) positioned so the side with the tumbler spring pocket nearest to the cylinder head faces up. 1. Insert one tumbler spring (2) into each of the 2. three spring pockets.
• The first tumbler (3) to be loaded will be the key cut position number 5 (the fifth number in the key code). Determine the cut depth at this position and install the corresponding tumbler (3) into the tumbler slot nearest the front of the cylinder (the end where the key is inserted). In the same manner, determine the cut depth and corresponding tumbler and install the two remaining tumblers
• (3) into the tumbler slots located at the key cut positions 7 & 9. 3. Check the correct loading by holding the tumblers in position and fully inserting the key into cylinder. All tumblers should be flush with the outside diameter of the cylinder. 4. Rotate the cylinder (1) so the tumbler spring pockets on the opposite side are facing up and then remove the key.
• Keep in mind it will be required to hold all tumblers down before removing the key to keep them from falling out. 5. 6. Insert one tumbler spring (2) into each of the three spring pockets. The first tumbler (3) to be loaded will be the key cut position number 6 (the sixth number in the key code). Determine the cut depth at this position and install the corresponding tumbler
• (3) into the tumbler slot nearest the front of the cylinder. In the same manner, determine the cut depth and corresponding tumbler and install the two remaining tumblers (3) into the tumbler slots located at the key cut positions 8 & 10. 7. 8. Repeat step 4 to confirm all tumblers are properly assembled/located.
• Lightly lubricate the tumbler surface and the small detent recess on the side of the cylinder assembly using the provided grease. 9. With the key fully inserted into the cylinder, install the cylinder into case (6), aligning detent recess of cylinder with the inner slot of case. Hold case (6) while pressing in on the cylinder (1) and rotate 90° clockwise, hold assembly and remove the key. 10.
• Insert the two provided shutter springs (4). Insert the shutter (5) in direction as shown in the picture until you feel and hear the snap in of the two shutter legs into the cylinder (1). 11. 12. Now insert cap (7) in direction as shown on picture until its snap fit condition has being achieved. 13. Locate/position lever (8) into assembly (cylinder tail) in direction shown on picture. 14.
• Finally locate retainer (9) into its position to hold the lever and therefore support the whole assembly. 15. As a final inspection, insert back the key all the way in to confirm the cylinder can freely rotate.

TABLE OF CONTENTS:

2016-2018 CHEVROLET SILVERADO COMPLETE SERVICE MANUAL – PDF DOWNLOAD

00-General Information..............................................................................    1
	00-01 General Information.pdf (p.1-71)..........................................................    1
	00-02 Maintenance and Lubrication.pdf (p.72-77).................................................   72
	00-03 Reminder Indicator (Reset Procedures).pdf (p.78-134)......................................   78
	00-04 Commonly Used Abbreviations.pdf (p.135-157)...............................................  135
	00-05 DTC Index.pdf (p.158-193).................................................................  158
	00-06 Emission Control Abbreviations.pdf (p.194-246)............................................  194
	00-07 Trouble Shooting.pdf (p.247-250)..........................................................  247
	00-08 Trouble Shooting – Basic Procedures.pdf (p.251-298).......................................  251
	00-09 Vehicle Diagnostic Information – Description and Operation.pdf (p.299-301)................  299
	00-10 Vehicle Diagnostic Information – Scan Tool Data.pdf (p.302-587)...........................  302
	00-11 Programming and Setup.pdf (p.588-658).....................................................  588
	00-12 State Emission Standards – Gasoline.pdf (p.659-723).......................................  659
	00-13 State Emission Standards.pdf (p.724-726)..................................................  724
	00-14 Vibration Diagnosis and Correction.pdf (p.727-884)........................................  727
	00-15 Squeaks and Rattles.pdf (p.885-887).......................................................  885
	00-16 Waterleaks.pdf (p.888-898)................................................................  888
	00-17 Air & Wind Noise.pdf (p.899-903)..........................................................  899
01-Engine...........................................................................................  904
	01-01 Engine Overhaul Procedures.pdf (p.1-55)...................................................  904
	01-02 Engine Controls and Fuel – 4.3L (LV3).pdf (p.56-1104).....................................  959
	01-03 Engine Controls and Fuel – 5.3L (L83 L8B) or 6.2L (L86).pdf (p.1105-1964)................. 2008
	01-04 Engine Heating and Cooling.pdf (p.1965-2523).............................................. 2868
	01-05 Exhaust.pdf (p.2524-2696)................................................................. 3427
	01-06 Engine Mechanical – 4.3L (LV3).pdf (p.2697-3445).......................................... 3600
	01-07 Engine Mechanical – 5.3L (L83 L8B) or 6.2L (L86).pdf (p.3446-4230)........................ 4349
	01-08 Hybrid & EV Controls.pdf (p.4231-4378).................................................... 5134
	01-09 Hybrid & EV Cooling.pdf (p.4379-4459)..................................................... 5282
	01-10 Hybrid & EV Energy Storage.pdf (p.4460-4669).............................................. 5363
	01-11 Engine Performance-Mode 6.pdf (p.4670-4703)............................................... 5573
02-Transmission & Driveline......................................................................... 5607
	02-01 Manual Transmission – Tremec 5-Speed (MQ7).pdf (p.1-286).................................. 5607
	02-02 Clutch.pdf (p.287-347).................................................................... 5893
	02-03 Automatic Transmission – 6L80 (MYC) or 6L90 (MYD).pdf (p.348-932)......................... 5954
	02-04 Automatic Transmission – 8L90 (M5U M5X).pdf (p.933-1560).................................. 6539
	02-05 Automatic Transmission Cooling.pdf (p.1561-1719).......................................... 7167
	02-06 Shift Lock Control.pdf (p.1720-1731)...................................................... 7326
	02-07 Power Take-Off.pdf (p.1732-1764).......................................................... 7338
	02-08 Transfer Case – MP 1222-1225-1226 (NQG).pdf (p.1765-1977)................................. 7371
	02-09 Transfer Case – MP 1625-1626 (NQF).pdf (p.1978-2245)...................................... 7584
	02-10 Transfer Case – MP 3023-3024 (NQH).pdf (p.2246-2569)...................................... 7852
	02-11 Wheel Drive Shafts.pdf (p.2570-2647)...................................................... 8176
	02-12 Front Drive Axle.pdf (p.2648-3158)........................................................ 8254
	02-13 Propeller Shaft.pdf (p.3159-3232)......................................................... 8765
	02-14 Rear Drive Axle.pdf (p.3233-3487)......................................................... 8839
03-Brakes........................................................................................... 9094
	03-01 Antilock Brake System – Less than 3900 kg (8600 lb) GVW.pdf (p.1-109)..................... 9094
	03-02 Disc Brakes.pdf (p.110-334)............................................................... 9203
	03-03 Hydraulic Brakes.pdf (p.335-612).......................................................... 9428
	03-04 Park Brake.pdf (p.613-736)................................................................ 9706
	03-05 Trailer Brake Controls.pdf (p.737-777).................................................... 9830
04-Steering & Suspension............................................................................ 9871
	04-01 Power Steering.pdf (p.1-213).............................................................. 9871
	04-02 Steering Linkage.pdf (p.214-246)..........................................................10084
	04-03 Steering Wheel and Column.pdf (p.247-363).................................................10117
	04-04 Electronic Suspension Control.pdf (p.364-391).............................................10234
	04-05 Suspension General Diagnosis.pdf (p.392-411)..............................................10262
	04-06 Rear Suspension.pdf (p.412-458)...........................................................10282
	04-07 Front Suspension.pdf (p.459-580)..........................................................10329
	04-08A Tire Pressure Monitoring (1 of 2).pdf (p.581-599)........................................10451
	04-08B Tire Pressure Monitoring (2 of 2).pdf (p.600-618)........................................10470
	04-09 Tires and Wheels.pdf (p.619-709)..........................................................10489
	04-10 Wheel Alignment.pdf (p.710-733)...........................................................10580
	04-11 Wheel Alignment Specifications.pdf (p.734-799)............................................10604
05-Accessories and Equipment........................................................................10670
	05-01 Active Noise Cancellation.pdf (p.1-8).....................................................10670
	05-02 Adjustable Pedals.pdf (p.9-51)............................................................10678
	05-03 Body & Paint.pdf (p.52-922)...............................................................10721
		05-03A Bumpers and Fascias.pdf (p.1-45).....................................................10721
		05-03B Bolted Exterior Body Panels and Closures.pdf (p.46-220)..............................10766
		05-03C Collision Repair.pdf (p.221-355).....................................................10941
		05-03D Frame and Underbody.pdf (p.356-513)..................................................11076
		05-03E Plastic Panel Information and Repair.pdf (p.514-520).................................11234
		05-03F Exterior Trim.pdf (p.521-721)........................................................11241
		05-03G Fixed and Moveable Windows.pdf (p.722-861)...........................................11442
		05-03H Paint and Coatings.pdf (p.862-871)...................................................11582
	05-04 Data Communication & Security.pdf (p.923-1599)............................................11592
		05-04A Data Communications.pdf (p.1-36).....................................................11592
		05-04B Data Communications – Diagnostic Information and Procedures.pdf (p.37-313)...........11628
		05-04C Object Detection and Pedestrian Protection.pdf (p.314-461)...........................11905
		05-04D Theft Deterrent.pdf (p.462-473)......................................................12053
		05-04E Vehicle Access.pdf (p.474-633).......................................................12065
		05-04F Immobilizer.pdf (p.634-677)..........................................................12225
	05-05 Cellular, Entertainment, and Navigation.pdf (p.1600-1923).................................12269
	05-06 Displays and Gauges.pdf (p.1924-2065).....................................................12593
	05-07 Instrument Panel and Console Trim.pdf (p.2066-2195).......................................12735
	05-08 Interior Trim and Paneling.pdf (p.2196-2235)..............................................12865
	05-09 Floor Coverings and Headlinings.pdf (p.2236-2318).........................................12905
	05-10 Horns and Pedestrian Alerts.pdf (p.2319-2346).............................................12988
	05-11 Lighting.pdf (p.2347-2701)................................................................13016
	05-12 Mirrors.pdf (p.2702-2776).................................................................13371
	05-13 Remote Functions.pdf (p.2777-2805)........................................................13446
	05-14 Power Outlets.pdf (p.2806-2840)...........................................................13475
	05-15 Power Seats.pdf (p.2841-2931).............................................................13510
	05-16 Seat Hardware, Trim, and Upholstery.pdf (p.2932-3107).....................................13601
	05-17 Seat Heating and Cooling.pdf (p.3108-3159)................................................13777
	05-18 Secondary and Configurable Customer Controls.pdf (p.3160-3175)............................13829
	05-19 Sunroof.pdf (p.3176-3205).................................................................13845
	05-20 Wipers and Washers.pdf (p.3206-3281)......................................................13875
06-Restraints.......................................................................................13951
	06-01 Seat Belts.pdf (p.1-31)...................................................................13951
	06-02 Supplemental Inflatable Restraints.pdf (p.32-215).........................................13982
07-HVAC.............................................................................................14166
	07-01 Heating, Ventilation, and Air Conditioning.pdf (p.1-370)..................................14166
	07-02 HVAC – Automatic.pdf (p.371-468)..........................................................14536
	07-03 HVAC – Manual.pdf (p.469-548).............................................................14634
08-Electrical.......................................................................................14714
	08-01 12 V Starting and Charging – Hybrid (HP5).pdf (p.1-46)....................................14714
	08-02 Starting and Charging.pdf (p.47-204)......................................................14760
	08-03 Cruise Control.pdf (p.205-233)............................................................14918
	08-04 Wiring Systems and Power Management – Vehicle Zoning Strategy.pdf (p.234-235).............14947
	08-05 Wiring Systems and Power Management.pdf (p.236-239).......................................14949
	08-06 Wiring Systems and Power Management – How to Use Electrical Schematics.pdf (p.240-241)....14953
	08-07A Component Locator (1 of 7).pdf (p.242-247)...............................................14955
	08-07B Component Locator (2 of 7).pdf (p.248-251)...............................................14961
	08-07C Component Locator (3 of 7).pdf (p.252-306)...............................................14965
	08-07D Component Locator (4 of 7).pdf (p.307-320)...............................................15020
	08-07E Component Locator (5 of 7).pdf (p.321-326)...............................................15034
	08-07F Component Locator (6 of 7).pdf (p.327-328)...............................................15040
	08-07G Component Locator (7 of 7).pdf (p.329-337)...............................................15042
	08-08 Master Electrical Schematic Icons.pdf (p.338-345).........................................15051
	08-09 Wiring Harness Routing Views.pdf (p.346-366)..............................................15059
	08-10 Component Connector End Views.pdf (p.367-1794)............................................15080
	08-11 Component Connector End Views And Component Locations.pdf (p.1795-1802)...................16508
	08-12 Inline Harness Connector End Views.pdf (p.1803-1893)......................................16516
	08-13A Schematic Wiring Diagrams (1 of 7).pdf (p.1894-1906).....................................16607
	08-13B Schematic Wiring Diagrams (2 of 7).pdf (p.1907-1928).....................................16620
	08-13C Schematic Wiring Diagrams (3 of 7).pdf (p.1929-1931).....................................16642
	08-13D Schematic Wiring Diagrams (4 of 7).pdf (p.1932-1936).....................................16645
	08-13E Schematic Wiring Diagram (5 of 7).pdf (p.1937-1949)......................................16650
	08-13F Schematic Wiring Diagrams (6 of 7).pdf (p.1950-1966).....................................16663
	08-13G Schematic Wiring Diagrams (7 of 7).pdf (p.1967-1973).....................................16680
	08-14 System Wiring Diagrams.pdf (p.1974-2129)..................................................16687

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

SK