ACE TLB 100 4WD Backhoe Loader Parts Catalogue – Perkins 200391422400/A PDF

Description

ACE TLB 100 4WD Backhoe Loader Parts Catalogue – Perkins 200391422400/A

This is the full ACE TLB 100 (4WD) backhoe loader parts catalogue issued under document number 200391422400/A, running to 215 pages of exploded assembly drawings and matching part-number tables. Every figure is laid out with ballooned reference numbers keyed to a parts list giving the part number, revision letter, description, quantity and, where relevant, remarks. It is the reference used to look up, cross-check and order the correct component for a TLB 100 4WD fitted with the Perkins engine.

If you maintain, service or rebuild a TLB 100, this is the document that answers the question every workshop job turns on: which exact part number belongs in this position. Ordering against a parts list instead of a guess is the difference between a machine that goes back to work and a second teardown.

File Details

• Manual type: Illustrated Parts Catalogue
• Brand: ACE
• Model: TLB 100 (4WD)
• Engine: Perkins
• Document number: 200391422400/A
• Language: English
• Page count: 215
• File format: PDF

Chapters Covered

The catalogue is organised into numbered sections, each opening with an exploded drawing followed by its parts table.

• 01 Assemblies
  • 01.01 Chassis Assembly
  • 01.02 Stabilizer Assembly
  • 01.03 Bonnet Assembly
  • 01.04 Cabin Assembly
  • 01.05 Cabin Sub Assembly
  • 01.06 Loader Linkage Assembly
  • 01.07 Boom Assembly
  • 01.08 Dipper Assembly
  • 01.09 King Post Carriage Assembly
  • 01.10 Slew Assembly
  • 01.11 Engine and Transmission Assembly
  • 01.12 Air Intake Assembly
  • 01.13 Exhaust Assembly
  • 01.14 Fuel Tank Assembly
  • 01.15 Propeller Shaft Assembly
  • 01.16 Front Axle Assembly
  • 01.17 Rear Axle Assembly
  • 01.18 Tyre Assembly BKT 14×25
  • 01.19 Tyre Assembly STD 16.9×28
  • 01.20 Front Mud Guard
  • 01.21 Tyre Assembly BKT 9×16
  • 01.22 Brake Linkage Assembly
  • 01.23 Parking Brake Assembly
  • 01.24 Gear Shifting Assembly
  • 01.25 Loader Control Valve Assembly
  • 01.26 Loader Control Valve Assembly 6 in 1
  • 01.27 Excavator Control Valve Assembly
  • 01.28 Excavator Control Valve Assembly
  • 01.29 Loader Control Valve Assembly
  • 01.30 ACC Linkage Assembly
  • 01.31 Hydraulics Steering Assembly
  • 01.32 Hydraulic Tank Assembly
  • 01.33 Cooling System Assembly
  • 01.34 Light Installation Assembly
  • 01.35 Battery Installation
  • 01.36 Dashboard Instrument
  • 01.37 Loader Bucket Assembly (1.2 CUM)
  • 01.38-01.41 Excavator Bucket Assemblies (0.30 / 0.24 / 0.18 / 0.12 CUM)
  • 01.42 Pump Assembly
  • 01.43 Feed Pipe Sub Assembly
  • 01.44 Decal Assembly
  • 01.45 Wiring Harness
  • 01.46 Stickers Assembly
• 02 Carraro Transmission Components
  • Oil Pump, Oil Filter, Transmission Housing
  • Input and PTO Transmission Shaft
  • Reverse Shaft and Primary Shaft
  • Secondary Shaft, 4WD Shaft
  • Speed Controls, Control Valve, Solenoid Valve
  • Torque Converter
• 03 Perkins Engine Components
  • Cylinder Block Assembly, Crankshaft Kit
  • Piston and Ring Kit, Connecting Rod Assembly
  • Rear End Oil Seal, Cylinder Head Assembly
  • Rocker Shaft Assembly, Timing Gear and Camshaft
  • Fuel Injection Pump, High Pressure Fuel Pipes, Atomisers
  • Pickup Sensor, Sensors, Fuel Leak Off Pipe
  • Flywheel Housing, Flywheel and Starter Ring, Starter Motor
  • Fan Drive, Pulleys, Sump
  • Dipstick and Filler Tube, Oil Strainer
  • Cylinder Head Cover, Breather, Filler, Blanking Plates
  • Oil Cooler, Oil Filter Mounting, Oil Filter
  • Front End Drive Input, Water Pump, Pipes
  • Water Outlet Housing, Fan, Alternator and Brackets
  • Auxiliary Drive, Timing Case, Timing Cover
  • Lubricating Oil Pump and Delivery, Turbocharger
  • Feed Pipes, Leak Off Pipes, Pipework and Connections
  • Exhaust Manifold, Induction Manifold
  • Lift Pump, Filter to Injection Pump Pipe, Injection to Filter Pipe
  • Boost Control Pipe, Heater Plug
  • Engine Lifting Eyes, Engine Mounts
  • Lubricating Oil Pressure Switch/Gauge
  • Temperature Gauge and Sender, Fuel Pre-Lift Pump
  • Pipes & Connection, Engine Identification Labels
  • Miscellaneous & Auxiliaries
• 04 Carraro Rear Axle Components
  • Axle Housing, Bevel Gear Set, Differential
  • Brakes, Brake Caliper, Wheel Hub, Final Reduction
• 05 Carraro Front Axle Components
  • Axle Housing, Bevel Gear Set, Differential
  • Double U Joint, Final Reduction
  • Swivel Housings & Steering Cylinder, Wheel Hub
• 08 Propeller Shaft
• 09 Hoses Kit
• 10 Boom & Dipper Hose
• 11 Steering Unit Hose
• 12 Loader Arm Hose
• 13 Cooling System Hose
• 14 Stabilizer & Swing Cylinder Hose
• 15 Hydraulic Cylinder
  • Loader Arm Lift Cylinder
  • Loader Bucket Cylinder
  • Stabilizer Cylinder (70x45x660)
  • Swing Cylinder (100x60x224) RH/LH
  • Boom Cylinder (110x60x955)
  • Dipper Cylinder (100x60x742)
  • Excavator Bucket Cylinder (90x60x665)
  • 6 in 1 Bucket Cylinder
• 16 Rock Breaker
• 17 Fuel Line Installation
• 18 AC with Heating System

What that adds up to in the workshop is a single document that lets you identify any sub-assembly on the machine, top to bottom. The first section breaks the TLB 100 into its major build groups – chassis, stabilizer legs, bonnet, cabin and cabin glazing, loader linkage, boom, dipper, king post carriage, slew, the engine and transmission pack, air intake, exhaust, fuel tank, propeller shaft, both axles, wheels and mud guards, brakes, parking brake, gear shifting, all three control valve groups, accelerator linkage, steering hydraulics, hydraulic tank, cooling system, lighting, battery, dashboard, loader and excavator buckets, pump, feed pipes, decals, wiring harness and stickers. Sections 02 to 05 then drill into the Carraro transmission, the Perkins engine, and the Carraro rear and front axles component by component, so a gear inside the transmission or a bearing inside the rear axle is just as findable as the bucket teeth. The numbered hose sections and the hydraulic cylinder breakdowns at the back cover every flexible line and every ram on the machine, including the 6 in 1 bucket cylinder and the rock breaker plumbing.

How the catalogue is structured

Each figure page carries a line drawing of the assembly with every item ballooned and numbered. The facing or following page holds the table: serial number, part number, revision letter, description, quantity and remarks. That pairing is what makes the catalogue usable for ordering – you read the balloon off the drawing, drop down the table, and you have the number to quote.

What you can do with it

Rebuild a stabilizer leg with the correct wear pads, pins and cylinder. Identify the right bush, seal ring or bearing inside the Carraro transmission instead of measuring and guessing. Trace a fuel leak through the Perkins lift pump, filter head, leak-off pipes and injector connections. Match a hydraulic hose by its location – loader control valve to excavator control valve, cooler to return filter, tandem pump to steering unit – rather than by length alone. Order decals and stickers for a machine being repainted. Confirm the correct tyre, tube, flap and rim combination for the 14.00×25, 16.9×28 and 12.5/80×18 fitments.

Why a parts catalogue matters

Part numbers do not stay stable across a machine’s production life. Revision letters in this catalogue mark superseded components, and ordering off a photograph or a memory of what came out of the machine is how wrong parts arrive. Working from the illustrated parts list means the number you quote is the number the assembly drawing shows for that position on a TLB 100 4WD with the Perkins engine.

Delivery

IMAGES PREVIEW

The catalogue is supplied as an instant PDF download – no shipping, no waiting on a disc. Open it on a laptop in the workshop office, on a tablet alongside the machine, or print the specific figure and table you need and take that page out to the job. Every assembly drawing and every parts table is present in the file.