Agfa CURIX 60 / CP1000 Medical Film Processor Service Manual – PDF Download

Description

Agfa CURIX 60 / CP1000 Medical Film Processor Service Manual – PDF Download

Description 

⚙️ Overview

This Agfa CURIX 60 / CP1000 Service Manual (DD+DIS015.01E) provides complete technical documentation for maintenance and repair of the Agfa CP1000 and CURIX 60 series X-ray film processors used in medical and radiological environments.
Manufactured by Agfa Gevaert AG, Munich (Germany), this manual details setup, calibration, electrical safety, and troubleshooting for professional field engineers.

IMAGES:

🧩 Main Sections

1. Pre-installation & Transport – unpacking, inspection, site preparation, environmental conditions, and electrical supply checks.

2. Controls & Connections – circuit descriptions, type-label reference, grounding, and inter-device compatibility.

3. Installation & Start-Up – processor alignment, chemical supply, water drainage, temperature calibration, and startup procedures.

4. Functional Description – film transport path, roller assemblies, dryer unit, replenishment pump circuits, and drive mechanisms.

5. Repair & Service Procedures – fault codes, electrical testing points, temperature sensor calibration, PCB layout diagrams, and software EPROM upgrade steps.

6. Reference & Circuit Diagrams – full electrical schematics and connection plans with DIN A3 drawings.

7. Spare Parts List & Accessories – catalog of replaceable parts, order codes, and optional jigs or kits.

8. Maintenance & Safety Bulletins – periodic checks, cleaning routines, and updates per Agfa HealthCare SB 01–07.

🧠 Technical Specifications

• Models Covered: CP1000 (type 9462/206/846/205/285/845) and CURIX 60 (type 9462/106/105/155/165)

• Power Requirements: 100–240 V AC (50/60 Hz) depending on variant

• Current Draw: 8–16 A (max load)

• Leakage Current: < 3.5 mA

• Heat Emission: ≈ 500 W (max processing)

• Ventilation: ≥ 10 air exchanges per hour recommended

• Environmental Conditions: Temp 10–35 °C / Humidity ≤ 85 %

• Safety Standards: EN 60950, IEC 60601-1-2, UL 1950, CSA C22.2 No. 950

🧾 File Details