Atlas Copco PV-275 Drill S/N 4385 Parts List PDF Manual

Description

Atlas Copco PV-275 Drill S/N 4385 Parts List PDF Manual

The Atlas Copco PV-275 Drill S/N 4385 Parts List PDF Manual is a serial-specific parts reference for the PV-275 drilling rig identified as serial number 4385. This extensive book breaks the machine down by major assemblies and then follows those assemblies through illustrated component views, bill-of-material listings, part numbers, quantities, descriptions, and cross-references. It is built around the exact configuration represented by S/N 4385, making it especially useful when the job is to identify the correct component within a large mechanical, hydraulic, pneumatic, electrical, structural, or drilling assembly.

Serial-Specific PV-275 Parts Reference

This is not a generic PV-series catalog. The book states that each parts book is custom made to a specific drill and repeatedly identifies the machine as PV-275, serial number 4385. It also warns that the correct parts book must be used to ensure correct parts identification. Buyers should therefore match the serial number before relying on the listed configuration. Production improvements can cause differences between machines, and the book notes that production models may vary in some detail.

Throughout the manual, assembly drawings are paired with reference-numbered parts lists. Many assemblies also point to deeper subassemblies on later pages, so a technician can move from a major installation to individual valves, cylinders, seal kits, gears, bearings, hoses, controls, rollers, brackets, fasteners, and other service parts. The result is a detailed component map of this particular drill rather than a short replacement-parts checklist.

File Details

• Manual type: Parts List
• Brand: Atlas Copco
• Model: PV-275
• Serial number: 4385
• Language: English
• Page count: 914 PDF pages
• File format: PDF

How the Parts Information Is Presented

The Atlas Copco PV-275 Drill S/N 4385 Parts List PDF Manual uses assembly-level drawings and bill-of-material pages to connect a visual reference number with its corresponding part number, quantity, unit, description, and notes. Cross-references such as “See Page” links in the printed parts listings lead from a parent assembly to related subassemblies. This is particularly valuable on systems such as the tower, powerhead, undercarriage, hydraulic controls, jack assemblies, cab components, compressor system, and feed system where a single top-level installation contains many serviceable groups.

The illustrations range from general arrangement views to exploded and sectional component drawings. Examples within the book include a hydraulic cylinder shown with internal seals and piston components, track and final-drive groups broken down into individual elements, powerhead and hydraulic-motor internals, cab and control-panel assemblies, tower and feed-system components, and hydraulic valve layouts. Selected drawings also carry torque requirements or other assembly-specific reference information. A numeric part-number index near the end of the book provides another route to locate listed components.

IMAGES PREVIEW

Chapters Covered

• Section A – Frame/Chassis
  • Decking installations, rear and cab-access decking/railings, CS and DCS decking
  • Entry/exit ladders, decking ladder assemblies and ladder weldments
  • Tower angle supports, tower support weldments, pivot blocks and 30-degree leg assemblies
  • Hydraulic cylinders, seal kits, hydraulic valve installation, 7-spool and 11-spool stacking valves
  • Angle-locking piping, angle indicator, CAT decking, tower rest and tow hooks
• Section B – Undercarriage/Tracks
  • CAT345SL track installation and CAT undercarriage assembly
  • Final drive group, front idler, adjustment and spring groups
  • Track guards, track groups, link assemblies, upper rollers and single/double flange rollers
• Section C – Jacks
  • Jack installation and jack assemblies
  • Hydraulic cylinders, 7 x 60 jack seal kits and counterbalance valves
• Section D – Cab/Console
  • Cab installation and bare cab assembly
  • Curbside and tower-side doors
  • Air conditioner assembly, heater and evaporator coils, filters and controls
  • Gauges and controls, pump controllers, standard CAT wiring and air-conditioning installation
• Section E – Derrick/Tower
  • PV-275 tower weldment, pivot blocks and PV275 hose-tray kit
  • Powerhead mounting group and CS/DCS powerhead guides
  • IR270MP rotary powerhead, powerhead machining, hydraulic motor and servo assemblies
  • Powerhead internal barrel, rocker-cam, housing, port-block and related assemblies
  • Flow-control and motor-control valves, spindle with shock sub and rebuild components
  • 8-5/8 rod changer, rod catcher, rod support, breakout base and 8-5/8 wrench assembly
  • Hoist installation, Braden 8,000 lb winch, brake valve, tower locking and rod-seal assemblies
• Section F – Powerpack/Engine
  • Engine PV270 assembly and bare C27 830HP engine
  • C27 powerpack base and mounting, driveshaft guard and 4-8D battery installation
  • C27 Tier 2 exhaust, silencers, radiator piping, cooler installation and CAC assemblies
• Section G – Air Cleaners
  • Air cleaner assemblies, air cleaner components and gasket kit
• Section H – Fuel System
  • 350-gallon fuel tank assemblies
  • Fuel-cooler piping, ether injection and starting kit
• Section I – Compressor/Air System
  • XL1900 compressor assembly and XL1600/XL1900 airend
  • Coupling, compressor piping, temperature bypass valve and oil filter
  • Compressor-control piping, blowdown valve, receiver installation and receiver tank
  • Upper/lower manifolds and main-air piping including PV-275 piping
• Section J – Hydraulic System
  • 59000-series pump/drive, main hydraulic pump, servos and C-Force motor
  • Pump internal groups, valve block and main hydraulic piping
  • Diverter valve/manifold, drill/pressure control components, return and supercharge manifolds
  • Cooling-control, regeneration and tensioner valves
  • Hydraulic tank, reservoir, filter and tower piping
  • Feed-system installation, sheaves, carriage, hydraulic cylinder, guide blocks and guards
  • Tower-raise cylinders and related hydraulic components
• Section K – Electrical System
  • Mainframe electrical installation and Tier 2 electrical box
  • Tower electrical installation and electrical box
  • Night lights, ground-level shutdown and warning horn
• Section L – Options
  • 7SB dust collector and dust-skirt installation
  • 8 GPM / 400 GL water-injection system, 400 GAL water tank and pump/motor
  • Mainframe and tower lubrication systems and C27/C32 engine prelube
  • Fire-suppression equipment, battery isolation/jump-start components and window wiper
• Section M – Tools/Accessories
  • 8-5/8 rod group, nameplates and PV-275 decals
  • Spanish decals and safety decal/manual kit
  • PV270-series safety manual, international shipping kit, loading clevis, shipping parts and filter elements

Taken together, these sections follow the drill from the chassis and running gear through the support jacks, operator cab, tower and drilling hardware, engine/powerpack, air and fuel equipment, compressor package, hydraulic and electrical systems, installed options, and accessory items. The organization is especially useful when the visible component is part of a larger assembly: the drawing identifies its reference position, while the associated list supplies the part number and description needed to continue the parts-identification process.

Detailed Illustrated BOM Coverage

A major strength of this PV-275 parts list is the depth of the assembly breakdowns. The undercarriage portion goes beyond a single track listing to show the final drive, idlers, spring and adjustment groups, track links, shoes, rollers and related mounting parts. The tower portion follows the structure into powerhead guides, rotary powerhead components, hydraulic motor internals, rod-handling hardware, breakout equipment, hoist and locking systems. The hydraulic section similarly moves from the main pump and piping into manifolds, valves, reservoir components, feed equipment, sheaves and cylinders.

For cab and control work, the book identifies windows, doors, seals, seat hardware, wiper equipment, air-conditioning parts, instrument-panel components, switches, gauges and pump controllers. The electrical and hydraulic listings include terminals, relays, wiring components, hoses, fittings, valves and other smaller items that can otherwise be difficult to identify by appearance alone. Because quantities and part descriptions are shown beside the reference numbers, the manual is useful for checking not only which component is called out but also how it appears within the complete assembly.

Parts Ordering Information

The manual instructs users ordering replacement parts to provide the unit serial number, the name of each part as listed, the listed part number, and the quantity desired. For this book, the unit identity is PV-275 S/N 4385. That serial-specific approach matters: the manual explicitly warns that each parts book is made for a particular drill and that correct parts-book selection is necessary for correct identification.

For that reason, the Atlas Copco PV-275 Drill S/N 4385 Parts List PDF Manual is best treated as a configuration-specific parts reference rather than a universal catalog for every PV-275. It is also primarily a parts book, not a general workshop procedure manual. Its value comes from the illustrated assembly structure, component callouts, part numbers, quantities, descriptions, cross-references, selected assembly data, and extensive index.

Identify PV-275 Parts and Plan Repairs with the Correct Reference

When repair work begins with a damaged, worn, leaking, broken, or missing component, this manual helps turn the physical assembly into an identifiable parts list. It supports technicians and owners working on the chassis, tracks, jacks, tower, rotary powerhead, cab, C27 powerpack, compressor, hydraulic system, electrical equipment, dust and water options, lubrication equipment, and related accessories by showing how components are grouped and what part numbers are assigned to them. Accurate identification is particularly important on a serial-specific machine because ordering from the wrong configuration can cause delays, incorrect parts selection, or unnecessary disassembly.

Use the Atlas Copco PV-275 Drill S/N 4385 Parts List PDF Manual to locate assemblies, follow reference numbers into subassemblies, confirm listed part numbers and quantities, and prepare parts requirements before or during repair work. The PDF is supplied by instant digital delivery after payment, so there is no shipping delay. It can be opened on compatible phones, tablets, laptops, and desktop computers and printed when a paper reference is more convenient in the workshop or at the machine.