Atlas Copco SF 1 – SF 15 Scroll Compressor Parts Manual PDF Download

Description

Atlas Copco SF 1 – SF 15 Scroll Compressor Parts Manual

This is the complete illustrated spare parts manual for the Atlas Copco SF range of oil-free scroll compressors. Covering the SF 1, SF 2, SF 4, SF 6, SF 8, SF 11 and SF 15 in skid-mounted, tank-mounted, Twin, Multi, Multi Pack and Full Feature layouts, it is the reference document a workshop or service technician needs when a component has to be identified, ordered and replaced correctly.

File Details

• Manual type: Illustrated spare parts manual / parts catalog
• Brand: Atlas Copco
• Models covered: SF 1, SF 2, SF 4, SF 6, SF 8, SF 11, SF 15
• Configurations: Skid-mounted, tank-mounted, Twin, Multi, Multi Pack, Full Feature, EWD option, air dryer variants
• Pressure variants listed: 8 bar(e), 10 bar(e), 100 psig, 145 psig
• Language: Multilingual – English parts data and column headings, with user instructions also provided in Danish, German, Greek, Estonian, Finnish, French, Hungarian, Italian, Lithuanian, Latvian, Dutch, Norwegian, Polish, Portuguese, Romanian, Russian, Slovak, Slovenian, Swedish, Turkish and Chinese
• Page count: 110 pages
• File format: PDF
• Document number: 2930 7085 21 (replaces 2930 7085 20)
• Publication date: 2009-08

Chapters Covered

• 1 Service kits – outlet pipe sets, grease pump sets, pulley sets, tip seal sets and grease cartridges grouped by model and pressure rating
• 2 Drive arrangement – SF 1-, SF 2-, SF 4 Skid-/Tank mounted – motor, service stage, air filter, check valve, hose assembly, pulley, V-belt set, safety valve, subframe, vibration dampers, wiring and temp switch
• 3 Drive arrangement – SF 6-, SF 8 Twin – dual-motor drive group with paired service stages, filters and belt sets
• 4 Drive arrangement – SF 6-, SF 8-, SF 11-, SF 15 Multi – multi-motor drive layout with three and four motor sub-lists
• 5-12 Air system – Air outlet – covering Skid-/Tank mounted, Skid Floor mounted, Twin, Multi Pack, Multi Pack EWD option, Multi Full Feature, Multi Full Feature EWD option and Multi Full Feature with air dryer
• 13-15 Cooling system – SF 1-, SF 2-, SF 4-, SF 6-, SF 8 Skid/Twin; SF 6-, SF 8 Multi Low; SF 8-, SF 11-, SF 15 Multi High
• 16-17 Regulating system – Skid/Twin and Multi variants with pressure switch, under-voltage module, hourmeter, Elektronikon Mk III, autotransformer and vent valve kit
• 18-19 Cubicle – 50Hz and 60Hz control panel layouts with terminal blocks, contactors, circuit breakers, transformers and wire harnesses
• 20-22 Bodywork – Skid/Twin, Multi Low and Multi High frames, side panels, roof assembly, cubicle doors, baffles, decals and warning labels

What Each Assembly Page Gives You

Every chapter follows the same service-friendly layout. An exploded illustration shows the assembly broken down into its individual components, and each component is called out with a reference number that links directly to the parts table. The table lists the reference number, the Atlas Copco part number, the quantity required, the part name and any relevant remarks such as the specific model or pressure variant a part belongs to.

Bold rows in the tables denote assemblies, and a black dot after a part number marks an item that belongs to the assembly printed above it. The <<<>>> notation points to a separate list under the same name – useful when a sub-assembly such as the drain assembly or the float assembly is broken out on its own page. Where a part number sits below the Ref./Name line, the manual instructs you to select the correct type or version for your machine, which is how the same drawing serves 8 bar(e), 10 bar(e), 100 psig and 145 psig units in one document.

Coverage Across the SF Range

The Atlas Copco SF 1 – SF 15 scroll compressor parts manual is organised so that you land on the right page for your specific machine rather than wading through a generic catalog. Drive arrangements are separated by model family – one chapter for SF 1/SF 2/SF 4 skid- and tank-mounted, one for the SF 6/SF 8 Twin, and one for the SF 6/SF 8/SF 11/SF 15 Multi. The air outlet section is split even further, with dedicated chapters for skid floor-mounted, Twin, Multi Pack, Multi Pack with EWD, Multi Full Feature, Multi Full Feature with EWD, and Multi Full Feature with air dryer.

Cooling, regulating, cubicle and bodywork chapters follow the same logic. Cooling runs across three pages covering the smaller skid and twin units, the SF 6/SF 8 Multi Low, and the SF 8/SF 11/SF 15 Multi High. The cubicle chapters are split by mains frequency, with a 50 Hz control panel set and a 60 Hz control panel set, each listing the contactors, circuit breakers, terminal blocks, transformers, fuses and wire harnesses used inside the enclosure. Bodywork is again split by frame size across three chapters.

Because the manual uses reference numbers tied to illustrated exploded views, and because every part row is tied to a model and pressure variant, ordering the wrong pulley, V-belt set, service stage, safety valve or filter element is far less likely when you work from these pages. Motors alone are listed across dozens of voltage and frequency combinations – 230V/50Hz single phase IEC, 200V-230V-460V/60Hz three phase CSA/UL, 575V/60Hz three phase CSA/UL, and many more – each with its own part number.

How This Manual Helps You

With this Atlas Copco SF scroll compressor parts manual you can break down any major assembly on the machine and identify each individual component by reference number, part number and quantity. That covers the drive group, the air outlet and receiver circuit, the cooling fan and cooler pipework, the regulating system with pressure switch and Elektronikon controller, the complete electrical cubicle and the bodywork panels and baffles.

The value is in getting the right part the first time. The manual shows pressure-variant-specific part numbers side by side, so a 10 bar(e) machine does not get an 8 bar(e) safety valve, and a Multi High unit does not get a Multi Low baffle. Where a component is only supplied as part of a larger assembly, the bold-row and black-dot convention makes that clear before you order.

Service kits are collected in their own opening chapter, which means the routine consumables – outlet pipe set, grease pump set, pulley set, tip seal set and grease cartridge – can be ordered in one place for the SF 1 through SF 15 families rather than hunted down one at a time in the assembly chapters.

IMAGES PREVIEW

Instant PDF Delivery

The manual is delivered as a downloadable PDF the moment your order is confirmed. There is no shipping, no waiting for a printed copy and no customs delay. You can open it on a workshop PC, a laptop, a tablet or a phone, print the specific exploded view and parts table you need for the job in front of you, and keep the rest of the file for the next machine. That makes it equally practical for a single owner maintaining one SF scroll compressor and for a service company working across the whole SF 1 to SF 15 range.