Bell 220E 225E MKII Logger Parts Manual | Telelogger & Crankboom 418211 418212

Description

Bell 220E 225E MKII Logger Parts Manual — Telelogger & Crankboom

This illustrated parts manual covers the Bell 220E MKII Logger (Telelogger, 418211) and Bell 225E MKII Logger (Crankboom, 418212). It is document number 874166, Third Issue June 2014, Rev C.1 amended October 2014. With 315 pages of exploded diagrams and parts lists, it is the reference for ordering and identifying components across the complete machine.

File Details

• Manual type: Illustrated Parts Manual
• Brand: Bell Equipment
• Models covered: 220E MKII Logger (Telelogger, 418211), 225E MKII Logger (Crankboom, 418212)
• Document part number: 874166
• Edition: Third Issue, June 2014; Rev C.1 amended October 2014
• Language: English
• File format: PDF
• Page count: 315

Chapters Covered

• Section 1 — General Information: Warranty information, installation certificates, introduction, user’s comment form, amendment record, abbreviations, ordering of parts, service kits, machine dimensions, serial number plates
• Section 2 — Engine (Deutz F4L912): Engine and miscellaneous parts, air cleaner system, air cleaner, exhaust system, exhaust kit, fuel system, spray nozzle, breather, blanking parts, cover and fastenings, crankcase, deflector plate, guide, oil filler cap, dipstick, timing cover, timing cover fasteners, idler bearing, oil pan, cylinder liner, flywheel, crankshaft, V-belt pulley, connecting rod, piston, cylinder head bolts, cylinder head cover, cylinder head, accessories, oil pressure pipe, oil suction pipe, overflow valve, fuel injector, fuel line fittings, fuel injection pump, fuel filter, gasket kit
• Section 3 — Powertrain: Transmission pump miscellaneous parts, transmission pump, wheel drive (Series 29), hydraulic motor 560CC, brake release valve, kit control linkage assembly, tail wheel axle, wheelset options (23.1X26 – 18.0X15.5), rear wheel assembly option (18.0X15.5), front wheel assembly option (23.1X26), wheelset option (18.4X30 – 400X15.5), rear wheel assembly option (400X15.5), front wheel assembly option (18.4/15X30)
• Section 4 — Hydraulics: Kit hydraulic return cooler and filter, kit suction and supply, kit hydraulic park brake, control valve (one bank), control valve (three bank), control valve handle assembly, double hydraulic pump 19CC/19CC, hydraulic fan motor 20.3CC, free flow reverse relief valve, rotator, cylinder assembly (boom lift), cylinder assembly (telescopic extension), cylinder assembly (grapple), hydraulic filter unit, return hydraulic filter, kit hydraulic tank lid
• Section 5 — Electrical: Electrical kit, control panel kit, battery assembly kit, starting & charging electrical schematic, beacon & worklight horn & blower electrical schematic, park brake wiper warning lights & hour meter electrical schematic, aircon system electrical schematic
• Section 6 — Frame & Body: Frame assembly option, bodywork front, bodywork rear, cab interior assembly, cab seat option, seat assembly, cab enclosed assembly, hydraulic cooler support kit, non-aircon and non-glazing fittings, kit remote greasing, aircon complete kit, aircon compressor mounting, aircon box, 225E crank boom, 220E teleboom assembly, 220E extended teleboom option, grapple assembly MT360/MT420 (with and without damper), additional counterweight option, 225E decals, 220E decals (Spanish), decal positions, fluids special tools & reference documentation

For anyone maintaining or repairing a Bell 220E or 225E MKII Logger, this parts manual eliminates guesswork from ordering. Every assembly is broken down into exploded views keyed to part numbers, quantities and descriptions. Whether you are replacing a hydraulic cylinder seal kit, sourcing a Deutz F4L912 engine component, identifying a wheel drive bearing or matching a control valve section, the relevant diagram and parts list are in one place.

What This Manual Covers

The engine section addresses the Deutz F4L912 in full — from the air cleaner and exhaust system through the crankcase, timing cover, cylinder head, pistons and connecting rods. Fuel system components including the injection pump, injectors, fuel lines and filters are all listed. The powertrain chapter details the transmission pump, Series 29 wheel drives, 560CC hydraulic motor, brake release valve and the complete tail wheel axle and wheelset options. Hydraulics are thoroughly covered with the return cooler and filter kit, suction and supply lines, park brake circuit, one-bank and three-bank control valves, double hydraulic pump, fan motor, relief valves, rotator, and all three cylinder assemblies — boom lift, telescopic extension and grapple.

Electrical coverage includes the complete machine wiring schematics for starting and charging, beacon and worklight, horn and blower, park brake, wiper, warning lights, hour meter and the aircon system. The frame and body section breaks down the main frame, front and rear bodywork, cab interior, seat assembly, enclosed cab, aircon components, hydraulic cooler support, remote greasing kit, crank boom, teleboom, extended teleboom and grapple assemblies. Decal positions for both 220E and 225E are documented, along with the Spanish-language decal set for the 220E.

Who This Parts Manual Is For

This Bell 220E 225E MKII Logger parts manual is aimed at fleet maintenance planners, workshop technicians, parts interpreters and owner-operators who need to identify the correct component for a specific machine. The exploded illustrations make it possible to see how assemblies fit together — useful when a part number is missing from a component or when confirming a superseded number. Service kits are listed for 100-hour, 250-hour, 500-hour, 750-hour, 1000-hour and 3000-hour intervals, giving a clear reference for planned maintenance parts ordering.

The manual covers both the Telelogger (crank boom) and the Crankboom variants, so it applies across the 220E and 225E MKII range. Machine dimensions and serial number plate locations are included in the general information section, helping to confirm you are working on the correct machine variant before ordering.

Why a Parts Manual Matters for the 220E and 225E MKII Logger

Ordering the wrong part for a forestry machine is costly — both in part cost and in downtime. This manual provides the part number, description and quantity for every listed component, along with the assembly context so you can see where it fits. The hydraulic schematics and exploded cylinder views are particularly valuable when rebuilding boom lift, telescopic extension or grapple cylinders, where seal kits and internal components must match exactly. The wheel drive and axle breakdowns help when servicing the Series 29 drives, bearings and seals. And the engine section supports everything from a routine fuel filter change to a top-end overhaul on the Deutz F4L912.

Having the parts manual on hand also helps when communicating with dealers or parts suppliers — you can quote the exact part number, describe the assembly it belongs to, and reference the page and item number. That reduces the back-and-forth that delays repairs.

IMAGES PREVIEW

Instant PDF Delivery

This Bell 220E 225E MKII Logger parts manual is delivered as a PDF download immediately after purchase. There is no shipping, no waiting for a physical book, and no risk of a lost package. The file can be viewed on a workshop computer, laptop, tablet or smartphone, and individual pages or sections can be printed for use at the machine. Keep it on file for the life of your 220E or 225E MKII Logger and reference it whenever a part needs identifying, a repair is planned, or a maintenance kit needs ordering.