CASE 420 420CT Series 3 Skid Steer Parts Catalogue 87632289 – English French Spanish PDF

Description

CASE 420 and 420CT Series 3 Parts Catalogue – Publication 87632289

This is the complete parts catalogue for the CASE 420 skid steer and 420CT compact track loader, Series 3. Published under reference number 87632289, first edition dated 01 Jan 08, the catalogue applies to machines from serial ASN N7M466710 and covers every major assembly and sub-assembly with exploded diagrams and full part number listings. The document is supplied in English, French and Spanish so one catalogue serves workshops, parts counters and mixed-language fleets across all three regions.

File Details

• Manual type: Parts Catalogue
• Brand: CASE
• Models covered: 420, 420CT Series 3 Skid Steer / Compact Track Loader
• Publication number: 87632289
• Edition: First Edition
• Publication date: 01 Jan 08
• Applicable serial: ASN N7M466710
• Languages: English, French, Spanish
• File format: PDF

Chapters Covered

The catalogue follows the manufacturer’s numbered section layout:

• General Information
• Section 2 – Engine
• Section 3 – Fuel System
• Section 4 – Electrical System
• Section 6 – Power train
• Section 7 – Brakes
• Section 8 – Hydraulics
• Section 9 – Chassis / Attachments
• Index

Section 2 – Engine

Fan, radiator/oil cooler and coolant recovery system, complete exhaust system with aspirator, air cleaner system, engine mounting and throttle linkage in both Series 3 and Europe configurations, dipstick and oil fill, remote oil drain, block heater, and the full engine assembly 87546691. Deeper sub-sections break the engine down to cylinder block and related parts, oil sump, front cover, flywheel case, breathers, cylinder head and covers, rocker shaft, intake and exhaust manifolds, heat exchanger, crankshaft, connecting rod, piston, flywheel, crankshaft pulley, camshaft and timing control, turbocharger, oil pump, oil filter, oil pump piping, water pump, cooling system piping, thermostat, belt pulley drive and cover, engine hooks, diagnostic sensors and monitoring electrical accessories.

Section 3 – Fuel System

Foot and hand throttle controls, fuel lines and fuel filter, injection pump, injector equipment, injection piping, fuel return, fuel filter assembly, fuel pump and fuel piping. Every fuel-system component is drawn as an exploded view keyed to its parts list.

Section 4 – Electrical System

Battery and cables, alternator mounting, engine electrical installation, engine electrical harnesses for both 420 and 420CT, chassis electrical, grid heater, cab electrics, left and right consoles, basic, deluxe and deluxe-without-aux control handles, remote jump-start disconnect switch, work lights (LH and RH), road lights for North America and Europe, headlamps, rear lights and mounting, backup alarm, accessory socket, horn, front auxiliary electrics, rotating beacon, Italian license-plate light and strobe light.

Section 6 – Power train

H-pattern and ISO-pattern joystick control plumbing for pilot-control machines, joystick valve kits, hydrostatic supply and return circuits, pump-to-drive-motor plumbing, override and brake valve, pump fittings, two-speed valve assemblies, multi-valve assemblies, single-speed and two-speed drive motors in both mechanical and pilot-control versions, hydraulic gear pumps in standard and high-flow trim, drive line, axle assembly, wheels and solid-flex wheels, 420CT final drive, rubber tracks, and the tandem pumps, motors and Rexroth A22 pump sub-assemblies.

Section 7 – Brakes

The hydraulic brake system with all hoses, valves, tubes, tees and fittings shown as an exploded diagram with part numbers.

Section 8 – Hydraulics

Tilt, lift, case drain, self-levelling, secondary front auxiliary, ride control, proportional and mechanical attachment circuits, coupler systems (standard and Italian), tilt and lift cylinders, high-flow hydraulics with pilot control, control valve assemblies, main relief and workport relief valves, spool end groups, check valve groups, EHPV spool end groups and the secondary front auxiliary valve assembly.

Section 9 – Chassis and Attachments

Loader lift frame, loader arm adjustment blocks, lift cylinder covers, mechanical coupler (standard and Italian), dirt and foundry buckets, low-profile and extended low-profile buckets, utility and light-material buckets, heavy-dirt buckets, bolt-on cutting edges, Italian bucket guards, pallet fork, chassis, controller mounting, loader and ground drive controls and linkage, auxiliary hydraulic controls, hoods (standard and air-conditioning), rear doors (standard and European louvered), rear-door lock, cab frame and seat bar, cab door with mounting, washer system, visor and wiper, demolition door and mounting, heater and air-conditioning systems and assemblies, seat bars, lap belts (2 in and 3 in), shoulder belt, seat mountings for suspension, deluxe suspension and standard seats, floor mat, rear-view mirrors, top window, side windows, headliners, rear windows, heat shields, interior trim, radio, speakers and antenna, soundproofing and noise control, lift hooks and the complete decal sets in English, Danish, Dutch, Finnish, French, German, Greek, Italian, Norwegian, Polish, Portuguese, Spanish, Swedish, Brazilian Portuguese, Canadian French and Latin American Spanish.

Index

A numerical index at the back lists every part number alongside its figure and reference number so you can locate a part directly by number instead of scrolling section by section.

What This CASE 420 Parts Catalogue Gives You

When a machine is in the shop and you need the correct number for a lift cylinder seal kit, a turbocharger gasket, a Rexroth pump control cartridge or a cab door latch, guessing is expensive. This catalogue removes the guesswork. Every component is drawn in an exploded view, called out with a reference number and matched to the correct CASE part number, quantity and description in the adjacent parts list. Because the same part can appear on several assemblies, the catalogue uses cross-reference notes such as See Fig 02-01 or See Fig 06-27, so you can trace a part across the whole machine before ordering. The 420 and 420CT Series 3 parts catalogue covers both the wheeled skid steer and the compact track loader in Series 3 configuration, including region-specific variations such as the Europe engine mount and fan spacer, the European louvered rear door, the Italian coupler and bucket guard, and the North American versus European road-light wiring. That means one PDF covers the majority of machines in this serial range regardless of destination. Because the manual is supplied in English, French and Spanish, it works for a mixed-language workshop, a fleet with machines from different markets, or a parts counter that needs to look up numbers for customers who prefer one of those languages.

IMAGES PREVIEW

Instant PDF Delivery

The file is supplied as a downloadable PDF. After purchase it is available immediately, with no shipping and no waiting for a printed book. Open it on a laptop in the workshop, a tablet on the machine or a phone at the parts counter. Print the pages you need for a job, whether that is a single exploded view or the whole hydraulic section. Every reference number is visible in the diagram and every part number sits in the list, so you can order with confidence and get the machine back in service faster.