CASE CX 17B EXCAVATORS OPERATOR’S MANUAL – PDF DOWNLOAD

Description

CASE CX 17B EXCAVATORS OPERATOR’S MANUAL

CASE CX 17B EXCAVATORS OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Manuals are available from your Dealer for the operation, service, and repair of your machine. For prompt convenient service, contact your Dealer for assistance in obtaining the manuals for your machine. Your Dealer can expedite your order for Operator’s Manuals, Parts Catalogs, Service Manuals, and Maintenance records. Always give the Machine Name, Model, and P.I.N. (Product Identification Number) or S.N. (Serial Number) of your machine so your Dealer can provide the correct manuals for your machine.

• Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. See Official documents. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. The standard attachments and tools of this machine are designed to carry out all kinds of earthmoving and rehandling operations.
• If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure that it is designed to carry out this kind of work. For this type of application, the machine must be equipped with safety valves, an overload indicator, a load handling chart corresponding to the type of machine and its attachment and a load fixing point.

All legal requirements must also be strictly observed. Do not use this machine for any application or purpose other than those described in this manual. If the machine is to be used for work involving the use of special attachments, accessories or equipment, consult your Dealer in order to make sure that any adaptations or modifications made are in keeping with the machine’s technical specifications and with prevailing safety requirements

TABLE OF CONTENTS:

CASE CX 17B EXCAVATORS OPERATOR’S MANUAL

CHAPTER 1
GENERAL INFORMATION
TO THE OWNER 1-1
RIGHT, LEFT, FRONT, AND REAR OF THE MACHINE 1-2
IDENTIFICATION NUMBERS 1-3
CHAPTER 2
SAFETY, AND DECALS
TABLE OF CONTENTS 2-1
SAFETY RULES 2-3
PERSONAL SAFETY 2-3
SAFETY AREA 2-3
UTILITY SAFETY 2-4
OPERATOR PRECAUTIONS 2-4
SAFETY DECALS 2-9
CHAPTER 3
INSTRUMENTS AND CONTROLS
TABLE OF CONTENTS 3-1
MACHINE NOMENCLATURE 3-3
STEPS AND ACCESS HANDLES 3-4
OPERATOR’S COMPARTMENT CONTROLS AND ACCESSORIES 3-5
INSTRUMENT PANEL 3-6
SWITCHES 3-9
CONTROL LEVERS 3-10
ACCESS COVERS AND GUARDS 3-16
OPERATOR’S SEAT ADJUSTMENT 3-17
SEAT BELT 3-17
CHAPTER 4
OPERATING INSTRUCTIONS
TABLE OF CONTENTS 4-1
BEFORE OPERATING THE MACHINE 4-3
OPERATING THE MACHINE 4-3
RUN-IN PERIOD 4-4
STARTING THE ENGINE 4-4
BRINGING THE MACHINE UP TO OPERATING TEMPERATURE 4-6
ENGINE OPERATION 4-7
STOPPING THE ENGINE 4-7
OPERATING THE MACHINE IN COLD WEATHER 4-8
OPERATING THE MACHINE IN HOT WEATHER 4-8
OPERATION 4-8
MACHINE TRAVEL 4-9
HYDRAULIC BREAKER AND NIBBLER OPERATION 4-11
TRANSPORTING THE MACHINE 4-13
OPERATING THE MACHINE IN WATER 4-15
PARKING THE MACHINE 4-16
OPERATING THE MACHINE ON SLOPING GROUND 4-16
OPERATING THE MACHINE ON SOFT GROUND 4-17
MOVING A DISABLED MACHINE 4-17
LOWERING THE ATTACHMENT IN THE EVENT OF A MACHINE FAILURE 4-17
PRACTICES TO IMPROVE EFFICIENCY 4-18
OPERATION WITH RUBBER TRACKS 4-20
MACHINE STORAGE 4-23
II Issued 03-07 Bur 87364366NA
CHAPTER 5
LUBRICATION, FILTERS, AND FLUIDS
TABLE OF CONTENTS 5-1
SERVICING INSTRUCTIONS 5-3
FLUIDS AND LUBRICANTS 5-4
DAILY INSPECTIONS 5-7
LUBRICATION AND MAINTENANCE CHART 5-8
GREASE FITTINGS AND LUBRICATION POINTS 5-10
ENGINE OIL 5-14
COOLING SYSTEM 5-16
FUEL SYSTEM 5-19
RELEASING PRESSURE IN THE HYDRAULIC SYSTEM 5-23
HYDRAULIC SYSTEM 5-24
AIR FILTER 5-31
TRAVEL REDUCTION GEARS 5-32
CHAPTER 6
MAINTENANCE AND ADJUSTMENTS
TABLE OF CONTENTS 6-1
TRACKS 6-3
CHANGING MACHINE WIDTH (CRAWLER FRAME WIDTH) 6-5
CHECKING THE CONDITION OF RUBBER TRACKS 6-7
TRACK ROLLERS AND IDLERS 6-9
BUCKET TOOTH POINTS AND SIDE CUTTERS 6-10
REPLACING A BUCKET 6-11
FAN AND ALTERNATOR DRIVE BELT 6-13
INSPECTING AND CLEANING THE MACHINE 6-13
CHECKING FOR CYLINDER LEAKAGE 6-13
FIRE EXTINGUISHER (NOT SUPPLIED) 6-14
PLASTIC AND RESIN PARTS 6-14
WELDING ON THE MACHINE 6-14
METRIC TORQUE SPECIFICATIONS 6-15
CHAPTER 7
ELECTRICAL
TABLE OF CONTENTS 7-1
ALTERNATOR 7-3
STARTER MOTOR 7-3
FUSES 7-3
BATTERY 7-4
CONNECTING A BOOSTER BATTERY 7-6
ATTACHMENT LAMPS 7-7
CHAPTER 8
SPECIFICATIONS
TABLE OF CONTENTS 8-1
ENGINE 8-3
HYDRAULIC COMPONENTS 8-3
SPEED AND GRADE ABILITY 8-3
BOOM SWING AND DOZER BLADE 8-3
MACHINE OVERALL DIMENSIONS – ROPS CANOPY 8-4
WORKING RANGE 8-5

FILE FORMAT:

LANGUAGE:ENGLISH
PAGES:130
DOWNLOADABLE:YES
FILE TYPE:PDF

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]