Case IH 5130 6130 7130 T2/T4 Combine Common Cab Parts Catalog 47416716

Description

Case IH 5130 6130 7130 T2/T4 Combine Common Cab Parts Catalog 47416716

This Case IH 5130 6130 7130 T2/T4 Combine Common Cab Parts Catalog 47416716 is the complete parts reference for the 5130, 6130, and 7130 Axial-Flow combines equipped with the Common Cab. Published October 2013, it covers Tier 2 and Tier 4 configurations with exploded illustrations, callout numbers, part numbers, and descriptions for every major system on the machine. Whether you are ordering a replacement sensor, tracking down a hydraulic fitting, or rebuilding a gearbox, this catalog gives you the exact part numbers and assembly context you need.

File Details

• Manual type: Parts Catalog
• Brand: Case IH
• Models covered: 5130, 6130, 7130 T2/T4 Combine
• Configuration: Common Cab
• Document number: 47416716
• Publication date: October 2013
• Language: English
• File format: PDF
• Page count: Approximately 1460 pages

Chapters Covered

The catalog is organized into the following sections, each with exploded views and part number listings:

• Initial Stocking List and Filters & Capacities
• Fire Extinguisher (NA, ANZ, and EU variants)
• Engine — mounting, oil drain, air cleaner, fuel system, exhaust, cooling, fan drive, air compressor, DEF/AdBlue
• Live PTO — PTO/engine installation, separator idler arm, PTO gearbox assembly, drive belt
• Transmission — housing and differential, gearshift lever, shift assembly, input shaft/gears, pinion shaft/gears
• Front Mechanical Drive — axle assembly, final drive assembly
• Rear Axle System — powered rear axle, PGA 2-speed, axle extensions, steering knuckle and hub, motors (single and 2-speed)
• Hydrostatic Drive — propulsion controls, pump assembly, fixed and variable motors, ground drive hoses
• Hydraulic Systems — separator/unloader/regulator valve, PFC/tandem gear pump, oil reservoir, cooler lines, main manifold, stack valve, feeder lift, lateral tilt, unloader swing, stationary air screen, feeder reverser, spreader
• Brakes & Controls — parking brake valve, master brakes, brake lines, master controls, pedal, service and park hydraulics, master valve assembly
• Steering — column, tie-rod assembly, steering wheel, hydraulic lines, pump, auto guidance
• Wheels — drive single (NA/ANZ), drive single (EU), drive dual, steering wheels
• Cab Climate Control — compressor to condenser, air conditioning box, heater, ATC, louvers and ducts, exterior air conditioning, compressor mounting and drive
• Electrical Systems — engine control harness, steering column harness, overhead control panel, chassis harnesses, hydraulic valve harness, trailer hitch harness, starter, block heater, alternator, battery and cables, beacons, road lighting, work lights, underpanel lighting, marker lights, hand-held lighting, instrument panel, feeder harness, sensors, precision farming, cab harness, cab roof electrical, auto crop settings, platform harness, console harness, rear lights, antenna, radio, mirror light, cab wiring, wiper, rotor limit switch, chaff spreader, concave potentiometer, combine controller module, console controls, auto guidance, wiring harness (precision farming), Fred II display, elevator sensors, AFS antenna/receiver, auto guidance module, GPS grain tank mounting
• Product Feeding — feeder adapter, 1000 series header adapter, lateral tilt adapter, rock trap, standard feeder, Hillco ready, front guard, rock trap assembly, idler assembly, header drive (single and two speed), gearbox, drive shaft, feeder conveyor, pivot idler, feeder drive, gear case, clutch, feeder reverser
• Threshing — transition cone, concaves, concave controls, anchor supports, rotor gearbox, separator jackshaft, jackshaft drive, rotor speed limiter, rotor speed governor, rotator drive gearbox, 3-speed rotor drive, torque sensing pulley, torque limiter, linkage, rasp bars, straight bars, rotors (AFX, small grain, corn/soybean, extended wear, small tube), rotor installation parts, front cage, separator side assemblies, door assembly
• Separation — discharge beater, separator top sheet, rotor cage rear support, rotor cage
• Residue Handling — cleaning fan speed control, elevator jackshaft drive, elevator drive idler, tailings elevator, straw chopper (standard and 6-row flail), chopper drive housing, cross supports, chopper grate/knife block/adjustment, straw spreader, straw/chaff spreader, spreader shields, chopper knife block, chopper body, chopper installation, straw chopper shield, smooth spreader disc, chaffer spreader, chaff spreader mounting, chaff spreader drives, chaff spreader idler, chaff spreader shields, dribble pan
• Cleaning — shaker pulley drive, cleaning system, hanger arms, belt drive jackshaft fan, shaker shaft drive, tailgate shoe door, shaft and bearing assembly, drive shaft, shaker drive shield, pitman assemblies (LH and RH), upper sieve frame, upper sieve manual and remote, remote sieve adjustment, viewing door, lower sieve remote and manual, hanger assembly arm, lower sieve support, sieve adjustment, cleaning fan assembly, fan housing, fan shields, fan drive belt shields, rear shield assembly, lower shield (EU), cleaning fan speed adjuster motor, fan drive jackshaft, fan pulley assembly, tailings elevator head, non-yield monitor elevator, tailings elevator installed, tailings delivery auger, elevator jackshaft clutch, auger bed
• Crop Storage/Unloading — elevator drive tightener, clean grain elevator tensioner, clean grain elevator (standard without bubbler, standard & extended wear), clean grain elevator frame with head, grain elevator housing/frame/supports, extended wear housing, grain elevator boot, tailings elevator boot, grain auger trough, inclined delivery auger, bubble-up auger (extended and standard), clean grain elevator standard and extended wear, clean grain elevator assembly, boot, grain elevator housing extended wear, grain tank bottom and augers, grain tank assembly, corner covers (RH and LH front), grain tank supports, access cover, access cover hardware, 250 bushel extensions (5130), 300 bushel extensions (5130 NA, 6130, 7130), access cover actuator and linkage, corner covers LH front, unloading chain drive, unloader belt drive 2.5 bu/sec (5130), unloader belt drive 3.0 bu/sec (6130 & 7130), 3 ft unloader extension, 4.4 ft unloader extension, upper unloader gearbox, lower unloader gearbox, unloader auger 21 ft, unloader tube 21 ft
• Hitches, Drawbars and Implement Couplings — hitch assembly base
• Frames and Ballasting — rear axle support frame, tailgate shoe door panel
• Platform, Cab, Bodywork and Decals — warning/caution/danger/information decals, model and brand decals, frame warning decals, control panel RH, deck extensions (50, 60, 62, 34 inch), platform support/ladder pivot, operator ladder, platform ladder RH, platform ladder RH (EU), operator platform LH, operator platform LH 24 inch, hand rails deck service RH, handrail assembly cab RH, manual mirror, electric mirror, operator seat cushion, operator seat lumbar adjusting, seat back and sliding guides, seat suspension unit, luxury seat cushion, seat back/lumbar/slides, semi-active suspension seat, cab frame, completing MRR package, inner roof, outer roof, cab mount, chin skirt cover, instructor seat, instructor/operator seat belt, sun visor LH/rear luxury cab, storage deck luxury cab, RH console pad deluxe & luxury, RH cab door, LH cab door, luxury cab handle, rear window, rear liners no storage, cab storage box deluxe/luxury, rear liners storage luxury cab, headliner, floor mat, non-yield monitor cab completing, side panel cab RH, precision farming cab completing, precision farming cab completing continued
• Accessories — ride control accumulator, grain bin access cover sleeper, axle extension 11.2 inch, axle extension 70 mm, power guide axle, 2-speed PGA conversion valves, auto rotating hitch, fixed hook drawbar, standard drawbar hitch, steering column foot rest, battery disconnect, AFS AccuGuide ready, lateral tilt install, rock trap drive assembly, transition cone standard wear, concave blanking plates, smooth spreader disc, anti-static kit, heavy duty shaker bearings, perforated auger troughs, vertical discharge unloader, unloading auger extension 1.3m/4.4 ft extended wear, unloading auger extension 1.3m/4.4 ft standard wear, water deflector, precision farming monitor mounting and cab completing, front axle wire shield, additional products folding EU light, fuel water separator installation, stationary air screen guard, door assembly stationary air screen, accumulator mounting and system, hitch assembly auto rotating (EU), hitch assembly auto rotating (NA & ANZ), hitch assembly fixed hook (EU), hitch assembly draw bar (NA & ANZ), axle extension 11.2 inch (NA & RWLD), axle extension 70 mm (EU), tall hill side divider attachment, short hill side dividers, wheel chock (Germany only), remote sieve completing

The Case IH 5130 6130 7130 T2/T4 Combine Common Cab Parts Catalog 47416716 is not a service manual — it is the parts identification tool that supports every repair and rebuild. Each section presents exploded illustrations with callout numbers keyed to a parts list containing the reference number, part number, year/serial applicability, quantity, and description. This structure lets you trace any component on the machine, confirm the correct part for your specific serial number range, and order with confidence. The catalog covers both Tier 2 and Tier 4 configurations, NA, ANZ, and EU market variants, and the full range of optional equipment including lateral tilt, rock trap, Hillco ready, power guide axle, and precision farming components.

IMAGES PREVIEW

Why This Parts Catalog Matters

Ordering the wrong part costs time and money. This catalog eliminates that risk by providing the exact part number for every assembly on the 5130, 6130, and 7130 Common Cab combines. The exploded views show how components fit together, so you can identify not just the failed part but also the fasteners, seals, and adjacent components that may need replacement at the same time. Serial number and production date notes throughout the catalog ensure the part you order matches the specific machine in front of you.

What You Can Do With This Catalog

• Identify and order replacement parts for engine, fuel, cooling, exhaust, and air systems
• Find part numbers for PTO, transmission, final drive, and rear axle components
• Trace hydraulic system components including valves, pumps, cylinders, and hoses
• Locate electrical components, harnesses, sensors, and lighting parts
• Identify threshing, separation, cleaning, and residue handling parts
• Find crop storage, unloading, and grain tank components
• Order cab, platform, bodywork, and decal parts
• Access accessory and attachment part numbers
• Confirm part applicability by year, serial number, and market variant

Instant PDF Delivery

The Case IH 5130 6130 7130 T2/T4 Combine Common Cab Parts Catalog 47416716 is delivered as an instant PDF download after payment. No shipping, no waiting. The file works on any device — computer, tablet, or smartphone — and can be printed for shop use. Keep it on your phone in the field or print the sections you need for the bench. This is the parts reference every 5130, 6130, and 7130 owner and technician should have on hand.