Case IH MXM135 Tractor Parts Catalog 688627886PC – MXM150 MXM165 MXM180 PDF

Description

Case IH MXM135 Tractor Parts Catalog 688627886PC

This is the full illustrated parts catalog for the Case IH MXM135 tractor built from serial number HCC0030000, published under document number 688627886PC. It is a parts identification and ordering reference, not a repair procedure guide – every figure is an exploded assembly drawing keyed to a numbered part list with the original Case IH part numbers, quantities and descriptions. The same catalog also lists parts for the MXM150, MXM165 and MXM180 where assemblies are shared.

If you are rebuilding, resealing, resealing a leaking housing, chasing a broken casting or simply ordering the right O-ring the first time, the value of this Case IH MXM135 parts catalog is that it shows you how the assembly actually goes together and which component carries which number. Nothing is left to guesswork from a generic drawing.

File Details

• Manual type: Illustrated Parts Catalog
• Brand: Case IH (CNHI)
• Primary model: MXM135 Tractor (ASN HCC0030000)
• Additional models listed: MXM150, MXM165, MXM180
• Document number: 688627886PC
• Page date shown on figures: 6/2016
• Language: English
• Format: PDF
• Page count: 775 pages

Chapters Covered

The catalog is split into the following figure groups, each one carrying its own exploded view and part list:

• Engine (0.02.1 – 0.40.0): engine assembly, cylinder block, oil sump, housing and covers, cylinder head, intake and exhaust manifold, crankshaft, piston and connecting rods, damper and flywheel, drive gearing / tappets and pushrods, fuel system injection pump, injectors, fuel filter separator, turbocharger, oil pump, oil filter, heat exchanger, water pump and fan, starter motor (ISKRA, Prestolite), alternator
• Engine Equipment (1.14.0 – 1.19.1): fuel tank, additional fuel tank, fuel lines, fuel tank support, silencer, radiator and related parts, cab air conditioner circuits, cooling expansion tank, heat exchanger with cab, air cleaner with precleaner
• Transmission (1.21.0 – 1.32.8/A): gearbox 18×6 semi power shift (SPS) with cab, 18×6 / 16×16 / 24×12 gearbox, mechanical gearbox, HI-LO 24×12 shuttle 40 km/h, gearing speed gear 15×12 30 km/h, support for 4WD front axle, PTO engagement clutch, clutch engagement, hydraulic control of gearbox, gearbox lubricating piping, casings / covers and supports, central reduction gears, differential gears, differential lock, pumps for hydraulic system and lift
• Front Axle and Steering (1.33.1 – 1.42.0): front axle drop box gears, drive hydraulic clutch, propeller shaft, propeller shaft shield, front axle box Class 3 and Class 4, steering axles and hubs, front axle link, front axle support, bevel gear and pinion sets, front axle differential, differential lock, differential gears and differential shaft, hydraulic steering cylinder, power steering hydraulic control
• Rear Axle (1.48.0 – 1.65.5): housing and covers final drive, gears and shafts final drive RH, brake system, parking brakes
• Electrical Systems (1.74.2 – 1.75.6): battery, electric controls, instruments and gauges, lightbar with GPS, battery cables, auxiliary cables, headlamp and reflector
• Hydraulic System (1.80.1 – 1.82.8): power take-off, PTO clutch, lifter housing and covers, lifter lines, lifter piston and cylinder, extra external control valves and pipes, 4-control valve unit, central housing breakdown (remote valve), remote control valve breakdown (EDC valve), rockshaft and associates hydraulic lift
• Sheet Metal (1.83.0 – 1.83.0/A): hood variants, tool box
• Implement Lift (1.89.6 – 1.89.9): implement carrier assemblies and sub-assemblies
• Operator Platform and Cab (1.90.2 – 1.97.1): ladder, instrument cluster analogue/digital, switches, worklamps, main cables, windscreen front wiper, radio installation and clock, lighting, cab frame, doors, cab glass, rear mudguards, cab supports, controls cover, soundproofing, mats, seat, air seat breakdown, front console trim, rear view mirror / sun curtain / number plate support, cab roof and escape hatch, air conditioner, heating system, blower, air conditioning control, brake pedal, parking brake control, clutch pedal, accelerator linkage, steering wheel and column, gearbox control, lift control, control valves, PTO control, miscellaneous caps, electronic control and electronic unit
• Wheels and Tracks (82.41 – 85.80): front and rear wheel rim assemblies across W12X28, W14LX28, DW16X26, DW18X38, DW16X38, DW15X38, DW20X30, DW21X32, DW16AX38 and DW20X34 rims
• Decals and Plates (1.98.0 – 1.98.2): plates, model name decals
• Variations (VAR.066 – VAR.996): weight carrier with hook, creeper transmission variants, fire shield, remote control valve without hydraulic lift, engine side rail, semi power shift transmission 18×6 40 kph 4WD, 3/8 inch drain outlet, joystick loader valve control unit, 4-control valve units, extra-long and long axle options, hubs, paddy field version, rear ballast, radar with cab, headlamp reflector, lift assist cylinder, PTO 540/1000 rpm with spring, front mudguards, mudguard side shields, rear view mirror, telescopic implement carrier arms, tow-bar with rollers, drawbar Europe and North America, number plate light mounting, set of tools

Working through this Case IH MXM135 parts catalog gives you the factory assembly logic for the whole machine rather than a handful of common wear items. Each figure numbers every component in the stack – seals, shims, snap rings, thrust washers, bearings, bolts, plates, housings, gears and shafts – and the matching table carries the part number, the variant footnote and the quantity required. That matters most where the same housing uses different shim thicknesses or where a plate set changes with model and serial break.

Who This Case IH MXM135 Parts Catalog Is For

Anyone maintaining or rebuilding an MXM135, MXM150, MXM165 or MXM180 will find this useful: owner-operators doing their own work, independent repair shops without dealer parts access, and parts counter staff who need to confirm a number before ordering. Because the catalog covers four models with clear variant notes, it also helps when an assembly has been swapped between machines and you need to identify which version is actually fitted.

What You Can Do With It

• Identify and order the correct part number for engine, transmission, front and rear axle, hydraulic and cab assemblies
• Follow exploded views to see the correct order of assembly for housings, covers, clutch packs, differentials, final drives and steering cylinders
• Confirm shim and thrust washer options by thickness where a bearing preload is set by selective shims
• Distinguish between model-specific and shared parts across MXM135, MXM150, MXM165 and MXM180
• Match starter motor, water pump, turbocharger, injection pump and alternator variants to the machine you have
• Verify fasteners, washers, O-rings, seals and locking plates with their stated dimensions
• Source parts for optional builds – creep transmission, paddy field version, extra-long axles, lift assist cylinder, telescopic implement carrier, drawbar variants and more
• Cross-check kit contents where a repair kit is supplied as a single number

Why It Pays to Work From the Correct Numbers

Parts catalogs earn their keep when a rebuild stalls on a wrong seal or a shim of the wrong thickness. This catalog gives you the model, variant and serial context behind each number, so a front axle bevel gear, a hydraulic valve section or a cab support component can be confirmed before it ships. Getting the number right the first time avoids return shipping, avoids downtime, and keeps a machine that is already apart from staying apart for another week.

IMAGES PREVIEW

Instant PDF Delivery

The file is delivered as a PDF immediately after payment – no shipping, no waiting on a disc, no dealer counter visit. Open it on a laptop, tablet or phone in the workshop, zoom into any exploded figure, and print the pages you want to take to the bench. Keep it on file for the life of the tractor.