Case IH Tractor Axial Flow 5130, Axial Flow 6130, Axial Flow 7130 Combine Service Manual 47506838

Description

Case IH Tractor Axial Flow 5130, Axial Flow 6130, Axial Flow 7130 Combine Service Manual 47506838

FILE DETAILS:

Case IH Tractor Axial-Flow 5130, Axial-Flow 6130, Axial-Flow 7130 Combine Service Manual_47506838

Basic instructions – Important notice regarding equipment servicing
AXIAL-FLOW 5130, AXIAL-FLOW 6130, AXIAL-FLOW 7130

• All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel, strictly complying with the instructions given, and using, whenever possible, the special tools. Anyone who performs repair and maintenance operations without complying with the procedures provided herein shall be responsible for any subsequent damages.
• The manufacturer and all the organizations of its distribution chain, including – without limitation – national, regional, or local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manufacturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
• In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case of damages caused by parts and/or components not approved by the manufacturer. The information in this manual is up-to-date at the date of the publication.
• It is the policy of the manufacturer for continuous improvement. Some information could not be updated due to modifications of a technical or commercial type, or changes to the laws and regulations of different countries. In case of questions, refer to your CASE IH AGRICULTURE Sales and Service Networks.Chain wear
  The individual joints in a roller chain articulate as they enter and leave the sprockets. This articulation results in wear on the pins and bushings. Material that is worn away from these surfaces will cause the chain to gradually elongate. Chains do not stretch. Material is worn from pin and bushing.
  Critical dimensions of the chain are as follows:
  • (1) 2X pitch
  • (2) Wear plus 2X pitch
  • (3) Elongation due to pin and bushing wear

TABLE OF CONTENTS:

• Case IH Tractor Axial-Flow 5130, Axial-Flow 6130, Axial-Flow 7130 Combine Service Manual_47506838
• AXIAL-FLOW 5130 [YDG009296 – ] AXIAL-FLOW 6130 [YDG009296 – ] AXIAL-FLOW 7130 [YDG009296 – ]

INTRODUCTION
Engine 10
[10 001] Engine and crankcase 10 1
[10 202] Air cleaners and lines 10 2
[10 254] Intake and exhaust manifolds and muffler 10 3
[10 310] Aftercooler 10 4
[10 400] Engine cooling system 10 5
[10 414] Fan and drive 10 6
[10 418] Rotary screen 10 7
[10 500] Selective Catalytic Reduction (SCR) exhaust treatment 10 8
Main gearbox and drive 14
[14 100] Main gearbox and drive 14 1
Transmission 21
[21 114] Mechanical transmission 21 1
[21 145] Gearbox internal components 21 2
[21 182] Differential 21 3
Front axle system 25
[25 310] Final drives 25 1
Rear axle system 27
[27 100] Powered rear axle 27 1
[27 124] Final drive hub, steering knuckles, and shafts 27 2
Hydrostatic drive 29
[29 100] Transmission and steering hydrostatic control 29 1
[29 202] Hydrostatic transmission 29 2
[29 204] Reservoir, cooler, and lines 29 3
[29 218] Pump and motor components 29 4
47506838 04/04/2013
Brakes and controls 33
[33 110] Parking brake or parking lock 33 1
[33 202] Hydraulic service brakes 33 2
Hydraulic systems 35
[35 000] Hydraulic systems 35 1
[35 102] Pump control valves 35 2
[35 106] Variable displacement pump 35 3
[35 220] Auxiliary hydraulic pump and lines 35 4
[35 300] Reservoir, cooler, and filters 35 5
[35 322] Regulated/Low pressure system 35 6
[35 359] Main control valve 35 7
[35 410] Header or attachment height system 35 8
[35 440] Grain tank unload system 35 9
[35 536] Crop processor system 35 10
[35 760] Header reverser drive 35 11
[35 796] Chaff spreader control 35 12
Steering 41
[41 101] Steering control 41 1
[41 106] Tie rods 41 2
[41 200] Hydraulic control components 41 3
[41 206] Pump 41 4
Wheels 44
[44 511] Front wheels 44 1
Cab climate control 50
[50 300] Cab pressurizing system 50 1
[50 200] Air conditioning 50 2
[50 100] Heating 50 3
[50 104] Ventilation 50 4
Electrical systems 55
[55 000] Electrical system 55 1
[55 010] Fuel injection system 55 2
[55 012] Engine cooling system 55 3
[55 013] Engine oil system 55 4
[55 014] Engine intake and exhaust system 55 5
[55 015] Engine control system 55 6
[55 031] Parking brake electrical system 55 7
[55 036] Hydraulic system control 55 8
[55 050] Heating, Ventilation, and Air-Conditioning (HVAC) control system 55 9
[55 100] Harnesses and connectors 55 10
[55 201] Engine starting system 55 11
[55 202] Cold start aid 55 12
[55 301] Alternator 55 13
[55 302] Battery 55 14
[55 405] External lighting switches and relays 55 15
[55 408] Warning indicators, alarms, and instruments 55 16
[55 421] Feeding control system 55 17
[55 423] Cleaning control system 55 18
[55 426] Harvest material flow control system 55 19
[55 518] Wiper and washer system 55 20
[55 520] Cab harvesting controls 55 21
[55 610] Ground speed control 55 22
[55 628] Threshing electrical control 55 23
[55 640] Electronic modules 55 24
[55 661] Cab header controls 55 25
[55 662] Header height control 55 26
[55 834] Sieve electric control 55 27
[55 836] Rotary separator control 55 28
47506838 04/04/2013
[55 988] Selective Catalytic Reduction (SCR) electrical system 55 29
[55 DTC] FAULT CODES 55 30
Attachments/Headers 58
[58 105] Attachment/Header reel control system 58 1
Product feeding 60
[60 105] Floating roll, feed chain, and drive 60 1
[60 110] Feeder housing 60 2
[60 122] Length-of-cut gearbox 60 3
[60 150] Feeder drive system 60 4
Threshing 66
[66 105] Concave 66 1
[66 110] Concave control system 66 2
[66 260] Threshing mechanism drive system 66 3
[66 331] Rotor 66 4
Separation 72
[72 410] Rotary separator drive system 72 1
[72 420] Rotary separator 72 2
Residue handling 73
[73 210] Straw chopper drive system 73 1
[73 230] Straw chopper 73 2
[73 335] Chaff spreader 73 3
Cleaning 74
[74 000] Cleaning 74 1
[74 101] Cleaning drive systems 74 2
[74 114] Upper shaker shoe 74 3
[74 118] Lower shaker shoe 74 4
[74 130] Fan housing 74 5
[74 140] Tailings return system 74 6
47506838 04/04/2013
Crop storage / Unloading 80
[80 101] Clean grain elevator 80 1
[80 150] Grain tank 80 2
[80 175] Grain tank unload drive system 80 3
[80 180] Grain tank unload 80 4
Platform, cab, bodywork, and decals 90
[90 105] Machine shields and guards 90 1
[90 124] Pneumatically-adjusted operator seat 90 2
[90 151] Cab interior 90 3

CASE IH TRACTOR AXIAL FLOW 5130, AXIAL FLOW 6130, AXIAL FLOW 7130 COMBINE SERVICE MANUAL 47506838:

SCREENSHOT OF THE MANUAL:

PLEASE NOTE:

⦁ This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
⦁ You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
⦁ Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted