Case IH Tractor Farmlift 525 Stage IIIB Operator’s Manual – PDF DOWNLOAD

Description

Case IH Tractor Farmlift 525 Stage IIIB Operator’s Manual

CASE IH TRACTOR FARMLIFT 525 STAGE IIIB OPERATOR’S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Before starting the machine for the first time, the Operator must read this manual carefully in order to fully understand the operation of the Telehandler and be adequately prepared for using it. Any use of the machine other than as described in this manual is strictly forbidden and releases the manufacturer from responsibility for any damage caused to persons, property or animals. When using the machine, scrupulously observe the respective diagrams of the fitted accessory.

• The purpose of this publication is to provide the operator with effective and reliable instructions on the Use and Maintenance of the Telehandler. If these instructions are carefully followed, your machine will give you full satisfaction for efficiency and duration, helping make your work considerably easier.
• These instructions on the Operator’s Manual are supplied by the Dealer at the time of delivery to ensure that they have been understood correctly.
• However if you do not understand any parts of this handbook, do not hesitate to contact your nearest Dealer and ask for explanations, as it is important for these instructions to be understood and observed carefully.
• Methodically perform periodical maintenance and note down the hours of operation of the machine. When spare parts are needed, it is important to use only genuine spare parts. The Local Agencies supply genuine spare parts and can give advice and instructions on their assembly and use.
• Fitting non-genuine spare parts can cause damage to other components. Customers are therefore advised to purchase the necessary spare parts only from an authorized Agent or Dealer. If the vehicle has to be used in especially heavy conditions (e.g.: very dusty environments or sites, clayey or very muddy ground), we advise you to contact your nearest Dealer for more specific instructions, non-observance of which can invalidate the machine’s warranty.
• This manual has been published to to be distributed all over the world, and the availability of the equipment from time to time indicated as fundamental or on request can vary depending on the territory where the machine has to operate. You can obtain all the relevant details on the available equipment in your zone from your nearest Distributors and Dealers.

TABLE OF CONTENTS:

Case IH Tractor Farmlift 525 Stage IIIB Operator’s Manual_51432205

1 GENERAL INFORMATION
Note to the Owner 1-1
Intended use 1-2
Operator’s manual storage on the machine 1-4
Machine orientation 1-5
Owner information 1-6
Machine Components 1-7
Telehandler identification 1-12
Diesel fuel 1-14
Checking Wind Speed1-18
Evaluate the firmness of the Ground below 1-19
Declaration of conformity 1-21
Electro-Magnetic Compatibility (EMC) 1-29
2 SAFETY INFORMATION
Safety rules 2-1
Machine out of service 2-9
Recognizing the safety rules 2-10
General notices 2-17
General information 2-20
Work safely 2-28
Safety devices 2-41
Noise level 2-47
Vehicle vibration levels 2-48
Safety Decals 2-49
Hand signals 2-57
3 CONTROLS AND INSTRUMENTS
Access to operator’s platform
Getting in or out of the driver’s cab 3-1
Door opening controls 3-2
Operator’s seat
Seat 3-5
Forward controls
Fundamental information to the operators 3-8
Pedal controls 3-10
Parking Brake 3-11
Front console 3-12
Multifunction control lever 3-15
Right-hand side controls
Steering selector 3-16
Tools controls 3-18
Exterior controls
Glove compartment 3-22
Instrument cluster
Instruments inside the cab 3-23
Central dashboard – Warning lights 3-24
Central dashboard instrument use 3-25
Anti-tipping device 3-30
Capacity diagram 3-34
Side console
Control panel with instruments 3-37
Emergency button 3-39
Starter Switch 3-40
Manual Accelerator3-42
Fan Reversing 3-43
Cab Internal Ventilation 3-44
Cab external lights 3-46
Boom Head Solenoid Valve (Optional) 3-48
Rear Hydraulic Sockets (Optional) 3-50
Electric contact on boom head 3-51
Quick couple r3-52
Trailer lowering (optional) 3-53
Opening lever of the engine bonnet 3-54
Sunshield 3-55
Wheel chock 3-56
4 OPERATING INSTRUCTIONS
Commissioning the unit
Environmental conditions 4-1
Starting the unit
Starting the machine 4-2
Moving the unit
Driving on roads 4-3
Parking the unit
Parking the machine 4-4
5 TRANSPORT OPERATIONS
Road transport
Front hook 5-1
Towing hook 5-2
Recovery transport
Towing the machine5-3
Lifting the machine 5-8
Transporting the machine5-9
6 WORKING OPERATIONS
General information
General information 6-1
Load handling 6-11
7 MAINTENANCE
General information
Maintenance and Control Logs 7-1
Maintenance descriptions 7-2
Torque charts 7-3
Fluids and lubricants 7-6
Cleaning the machine 7-7
General information 7-9
DPF (Diesel Particulate Filter) regeneration 7-15
Maintenance chart 7-21
Every 10 hours
Check engine oil level 7-26
Coolant level check 7-27
Every 50 hours
Hydraulic oil level – Check check 7-28
Cleaning of the cab air filter 7-29
Telescopic boom sliding blocks 7-30
Greasing 7-32
Wheels and Tires 7-34
Cylinder locking valves 7-36
Every 100 hours
Water / Oil / Intercooler Radiator 7-38
Every 500 hours
Replace of the cab air filter 7-40
Cleaning of the air conditioning (optional) Cleaning 7-41
Air cleaner7-42
Compressor belt tension tension7-45
Every 1000 hours
Cleaning of the fuel tank7-46
Hydraulic oil change and filter replacement 7-47
Front and rear axle7-50
Electrical System
Batteries 7-53
Battery cut-off 7-57
Starting with auxiliary Batteries 7-58
Fuses 7-60
Lights 7-64
Storage
Storing the machine 7-69
8 TROUBLESHOOTING
Fault code resolution
Troubleshooting8-1
9 SPECIFICATIONS
Dimensions specifications 9-1
10 ACCESSORIES
Water heater (Optional) 10-1
Electric socket (optional) 10-2
Cab front window protection 10-4
Boom suspension 10-5
Plate with ISO coupling 10-6
11 FORMS AND DECLARATIONS
Pre delivery check 11-1
Log Book 11-5
Note to the owner 11-12

FILE DETAILS:

Case IH Tractor Farmlift 525 Stage IIIB Operator’s Manual_51432205
Size : 20.6 MB
Format : PDF
Language : English
Number of Pages : 282 pages
Brand: Case IH
Type of machine: Tractor
Type of document: Operator’s Manual
Model: Farmlift 525 Stage IIIB
Part No: 51432205

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.